Check Valves Dealers in Ashram Road, Ahmedabad

Dual plate check valves is most suitable foe water pumps, chemicals pupms and oil gas applications. Body of DPCV are CI, CS, SS304, SS 316 or any specific materials with the Disc of same materials as well as other materials.Dual plate NRV is soft seated with Nitrile,Neoprene,Silicon ,Viton etc.It is suitable for vaccum application.We have sizes from 50 mm to 900 mm.

AMTECH™ forged Non Return Valve which is suitable for High pressure line of oil, gas, water, refining, steam etc. Non return valves are available in forged body A 105, F 22 ,F 11 ,F 304 ,F 316, and other special alloy steels.We have 800#,1500#,2500# design check valves.   Specification

We are offering oswal check valves are heavy duty, bolted cover, renewable seat ring, and body mounted disc swing type. Valves are straight through flow which works automatically. They are opened by the force of velocity pressure and closed by the force of gravity and back pressure. The valves are single direction flow and restrains flow in opposite direction. Distortion, wear and noisy operation of the valve can be avoided by selecting the size of the valve on the basis of flow conditions. Swing check valves are best suited for moderate velocity operations. Swing check valves are normally designed for horizontal installations. It can be installed in vertical direction with flow in upward under the disc. There is no tendency for seat to gall because the disc meets flat surface without rubbing upon contact. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. Flow directions are marked as cast on the body for ease of installation. Swing check valves are adequate for all service media. Valves can also be supplied with counter weights and dash pot arrangement depending upon the condition and request.

Non Return Valve is especially manufactured to prevent reversal of flow in fluid piping systems. We are enlisted among the reputed Suppliers of Non Return Valve from Gujarat, India. The Non Return Valve  that we offer is gaining high popularity among customers due to its automatic operations. This valve is opened by the flow of fluid in the forward direction and is closed by back pressure of the fluid or by the weight of the closing mechanism or by a spring force.

• Size: 40 mm to 200 mm
• Material: Stainless Steel
• Features: Reliability,Free from degradation.,Feasible
• Brand: Ui
• Material Grade: SS304
• Shape: Round
• Weight: Upto 3 kg

• Material: Stainless Steel
• Size: 1/2" to 24" Flanged ends/Butt weld ends
• Brand Name: Suraj Steelmet
• Grade: CF3,CF3M,CF8,CF8C,CF8M,CD4MCU,CW12MV,AI BRONZE
• Operating Mode: Auto
• Standard: API 6D / BS 1868
• Type of End Connection: Bolted Cover, Swing Type Disc

Ball Type Check Valves (NRV) B-01 was the first of the valve at Normex with unique design and technology for the first time in India. A very simple and robust design with no mechanism involved. The heart ofб═ valve is rubber coated ball. The mechanism hinge-pin-disc used in conventional check valves is eliminated

RangeSize 600 to 1200 Pressure up to PN 1.6 Conforming to IS : 5312 (Part-1)OverviewKirloskar Brothers Limited is a leading designer and manufacturer of centrifugal pumps and pumping systems for the Industry sector.FeaturesRigid and sturdy design Swing check type with minimum head loss Long service lifeApplicationsClear Water up to 45 C Water works Water / Effluent / Sewage treatment plants

We offer a wide range of double hydrant valve, which have two delivery ends. These also have a hand wheel for opening or shutting off the water supply. Further, our range is made of gunmetal.

• Model : AFLV Size : 1/4", ½" Presssure : 0 to 10kg Media : Air: Model : AFLV Size : 1/4", ½" Presssure : 0 to 10kg Media : Air
• Model :: AFLV
• Size :: 1/4", ½"
• Presssure :: 0 to 10kg
• Media :: Air

5/2 Foot Liver Valve

• Country of Origin: Made in India
• Connection Type: Flanged
• Finishing Type: Color Coated
• I Deal In: New Only
• Media: Water, Fuel, Air
• Usage/Application: Industrial
• Size: 1/8", 1/4", 3/8", 1/2"

• Material: Stainless Steel
• Brand Name: Racer
• Valve Size: 40mm To 300mm
• Media: Water, Fuel

We manufacture our products from quality basic supplies and the most leading edge technology in compliance to the international standards of quality. These are not just made keeping quality in mind but at very rigidly tested out for their quality to offer faultless products to the clients. These are ideally designed by our experts for unobstructed & easy flow of thick & tacky fluids. The non-interrupted direct flow enables minimal contact of the fluid flowing, without the buildup of the gluey fluid in the orifice to ascertain right velocity. The pulp valves manufactured by us are known for their aspects such as robust fabrication, high tensile strength& abrasion resistance, easy installation & maintenance, least requirement for maintenance and good durability. Our valves are prudently designed by our well-qualified professionals to provide smooth unhindered flow of viscid Fluids. We are the top Pulp Valves Exporter of India.

• Design Standard: API 600 / BS1414
• Size Range: 10 MM TO 50MM

Check Valve "HP" Check Valve are heavy duty, bolted cover plate with renewable seat ring and body mounted disc swing type are straight through flow which works automatically. If Opens by the force of pressure and closed by the force of gravity and back pressure. To reduce wear & noise problem size of valves should be select on the basis of flow conditions.

• Features: Solid one piece cast body in corrosion resistant stainless steel, 150 PSI working pressure, Bonnet less outside screw and yoke, non –rising hand wheel rising stem
• Spindle: SS 304
• Gate: SS 304
• Gland: Cast Iron / Cast Steel / SS 304 / SS 316
• Main Body: Cast Iron / Cast Steel / SS 304 / SS 316
• Bracket: M.S.Strip
• Available in sizes: 2” to 24”diameter

• Size: 25mm To 300mm
• Model: Flanged end Stainless Steel Non Return Valve
• Brand Name: GURUKRUPA ENGINEERS

single disc check valves, Knife Gate Valves, Pulp Valves

Non Return Valves, News Paper, pet plastic flake

offset disc butterfly valve, pvdf lined valves, PFA Lined Valves

Manufacturing Std. : BS 1868 Testing and Inspection Std :API 60 End Connection : Flanged as per ANSI B 16.5 RF • Seat Weld 8 and above • Lifting Eye Bolt 6 NB and above • Disc Stelliting Optional

centralizers, gas

Resilient Seated High Flow Disc Butterfly Valve

Reflux Valve, cast iron, Ductile Iron Pipes, Ductile Iron Fittings

Pressure Reducing Valves

Double Diaphragm Pulse Jet Valve, PPCH Male Threaded Elbow

Hydraulic Test Pumps, ss pumps, tailor made pumping systems

forge steel product, Strainer, Industrial Valve

Stainless Steel Check Valves, Knife Gate Valve