Check Valves Dealers in Raipur, Ahmedabad

• Material: Cast Iron
• Type: Flanged
• Surface Finish: Polished
• No of Bolt: 6 Bolts

Wafer style body valves are designed with flange less bodies with relatively short face-to-face dimensions. They are clamped between matching flanges which are connected by studs and nuts.

Proline Make Disc Check Valve (Non Slam Check Valve) Open And Closed Quickly Against The Opposite Flow Acting On Disc & Provide The Full Flow In Line It Occupy Very Less Space And Provide Full Flow & Spring Will Prevent The Reverse Flow In Pipe Lines Zero Leakage With Soft Seated, Light In Weight And Easy Installation Testing Standard: API 598

• Valve Size: 1" to 6"
• Material: Cast Iron
• Type: CCIPT - Series (Cast iron piston type)
• Connection: Flanged
• Usage/Application: Ammonia
• Pressure: 300 PSI
• Brand: Super, Superfreeze, Danfoss
• Model: Globe type
• Model Name/Number: NRV
• Size: 25mm to 125 mm

We are engaged in offering a wide range of PP Non Return Valve Flange End which is known for high efficiency and longer service life. These are available with us in different specifications to meet the various requirements of our clients. Further, owing to offer quality range of products, we are appreciated by our clients across the country. Available M.O.C: PP (Polypropylene) PVDF (Polyvinylidene Fluoride)

• Brand Name: Janatics
• Port Size: G1/4
• Flow Rate Litre Per Min: 1200
• Operating Medium: Compressed air - dry, filtered, lubricated
• Part Number Text: DS245SS61-A
• Product Information: Ensure to have a minimum air supply of 1200 lpm to the valve through a tube of minimum 8 outer diameter - with minimum 5.5 internal diameter to prevent malfunctioning of the valve
• Protection: IP65
• Series: DS2
• Specific Uses Of The Product: Suitable for manifold mounting
• Temperature Range Celsius: 5 to 60
• Tsin: TC006261224
• Valve Type: 3/2 valve
• Working Pressure : 42410 Bar

• Size: 1inch, 2inch, 3/4inch
• Material: Metal
• Application: Oil Fitting, Water Fitting
• Pressure: High Pressure, Low Pressure
• Number Of Way: 2way, 3way, 4way
• Type: Wafe
• Pattern: Plain

Prime Industrial Valves Mfg. Co. is a dependable Manufacturer, Exporter, and Supplier of Wafer Check Valve. We use only the finest of metal to manufacture Wafer Check Valve. Our Wafer Check Valve is manufactured as per set industrial norms, thus it performance flawlessly. Standards Design & manufacture standard : API 594 / API 6D Face to face standard : MFG or API 594 Connection ends : Wafer Test : Conforms to API 598

• Manufacturing Standard: Manufacturing Standard
• BS 1868 / API 6D: BS 1868 / API 6D
• Test & Inspection: Test & Inspection
• API 598 / BS 6755: API 598 / BS 6755
• Ends: Ends
• Flanged to ANSI B 16.5 /BS 4504 / BS 10: Flanged to ANSI B 16.5 /BS 4504 / BS 10
• End to end dimensions: End to end dimensions
• ANSI B 16.10: ANSI B 16.10
• Pressure rating: Pressure rating
• ANSI 150# - 2500# DIN PN6 - PN 250: ANSI 150# - 2500# DIN PN6 - PN 250

Experience of decades and latest technical instruments has helped us to fulfill global requirement of industrial ball valves with highly efficient devices with wide selection of alternatives. We are marked as chief manufacturer and exporter of industrial ball valves. We help our clients about the criteria that how to select an industrial ball valves? We also help our clients by perfectly match ball valves for their exact industrial need.

Design NU-TECH cast steel valves are designed and manufactured to provide maximum service life and dependability. ALL check valves meet the design requirements of American Petroleum Institute standard API600 & API 6D. BS EN 13709 and generally, Conform to American Society of Mechanical Engineers standard ASME B16.34. VaLves are available in a compLete range of body/bonnet materials and trims.   Available Modifications Fon "NU-Tech Cast Steel Valves Trim Changes End Connection Modifications Packing and Gasket Change Operator Mounting Handwheel Extensions Pressure Equalizing Customer Specified Coatings Weld End Bore Changes Oxygen & Chlorine Clearing & Packaging   Eyebolt For 150Lb-8', 300Lb-8" 600Lb-6" • 900Lb-1500Lb/2500Lb-4"& over. Bolted cover.   BC Welded cover & Pressure seal bonnet in services requiring frequent cycling or with high pressure/term perature variations.   End Connection A choice of flanged, WO flanged or butt welding end for piping flexibiLity.   Body to Cover Joint A male & female joint or tongue and groove joint is used 150Lb to 600Lb valves. Ring joint is used in the body to cover connection in 900Lb & higher rated valves.   Range Of Materials Standard body/bonnet materials include nine grades of carbon, low alloy & stainless steels. For special applications they can be supplied in other grades of alloy & stainless steeL Threre's a full range of trim materials to match any service optional packing S, gasket materiaLs are available for a fulL range of service conditions.   Outside Lever B Weigh All external hinge pin swing check valves 12" & smaller are available with an optional outside lever and weight, internal hinge available with all swing check valves.   Seat Rign Separate heavy duty fulL ported rings for easy maintenance, Screwed or welded connection into body.   Hcu Weighted Mechanical Accumulator This design can be used to either dampen or assist closing of the check valve disc depending on orientation. by using the hydraulic controL unit to buffer action the disc, the vaLve opens at lower flow rates.

• Valve Size: 1" to 48"
• Design Type: Wafer type
• Shape: Round
• Installation Type: Vertical
• Type Of Disc: S.G. Iron / M.S. / S.S.
• I Deal In: New Only

• Structure: Feeding
• Connection Type: Flanged
• Media: Water, Fuel, Air
• Finishing Type: Color Coated
• Brand: JEKON
• Usage/Application: Industrial
• Size: 1/8", 1/4", 3/8", 1/2"

The company is a well-known Supplier of G.M Screwed Check Valve in the country. Our G.M Screwed Check Valve is made using high grade materials, which also meets the norm of international quality standards. We make available our G.M Screwed Check Valve, which has internal seats made up of high quality stainless steel. Specifications Body Test Pressure : 300 Psig HydSeat Test Pressure : 200 Psig Hyd. Availability Screwed Female EndsSize Range : 15 mm to 100 mm

• Specialities: Convenient working, Advanced technology used, Advanced technology used
• Material: Brass/Bronze
• End Connection: Screwed
• Usage/Application: Air
• Brand: SVR
•  :  

• Specialities: Wear resistance, Capacity to withstand High temperature, Durability

• Brand Name: Asiatic
• Material: Stainless Steel
• Media: Air

• Material: Stainless Steel
• Media: Air, Water, Gas
• Temperature Of Media: High Temperature, Low Temperature, Medium Temperature
• Power: Manual
• Valve Size: 15 mm to 25 mm
• Seal Form: Auto Sealed
• Work Pressure: 1.6 MPa

MANUFACTURING STANDARD: BS : 1868 & API 6D FACE TO FACE AS PER ANSI B 16.10 ENDS: FLANGED END AS PER ANSI B 16.5 R.F & BUTTWELD END AS PER ASME B 16.25 TESTED AS PER BS 6755 SIZES AVAILABLE FROM 15mm TO 600mm.

• End Connection: Flanged ends as per ANSI B 16.5 & 26” and above ANSI B 16.47 Series A & B 598
• Manufacturing Std: BS
• Testing & Inspection Std: API
• Face to Face: ANSI B 16.10 600
• Butt Weld Ends: As per ANSI B 16.25
• Shell wall Thickness: ANSI B 16.34

Special Features   With Stelliting With IBR Certification With Nace MR 0175   Technical Detail

NU-TECH cast steel valves are designed and manufactured to provide maximum service life and dependability. ALL check valves meet the design requirements of American Petroleum Institute standard API600 & API 6D.

FOOTVALVE and HOSE COLLAR, Rice Jet Polisher, POLY GUARD CABLES AND WIRES

hydraulic check valve, Food Grade Rubber Sheet

Bronze Check Valve, Fusible Forged Plug, Bronze Gate Ball Valve

Double Diaphragm Pulse Jet Valve, PPCH Male Threaded Elbow

Non Return Valves, Water Hose

nrv valves, Gate Valves, Globe Valves, Butterfly Valves

Spherical Disc Pump Valve, Compact Pneumatic Cylinder, pilot operated valve

Non Return Valves, Crate Trolley, industrial caster, Rubber Wheel

Non Return Valves, Seat, break

Non Return Valves, Rubber Products, Strainers, Check Valves, Globe Valves