Check Valves Dealers in Sarkhej, Ahmedabad

• CAST STEEL: STAINLESS STEEL

We offer stainless steel swing check valve. Check valves, or non-return valves, are installed in pipeline systems to allow flow in one direction only. They are operated entirely by reaction to the line fluid and therefore do not require any external actuation. In this text, the expected, or desired direction of flow is termed 'forward flow’, flow in the opposite direction is 'reverse flow'. reasons for using check valves, which include: protection of any item of equipment that can be affected by reverse flow, such as flow meters, strainers and control valves. to check the pressure surges associated with hydraulic forces, for example, water hammer. these hydraulic forces can cause a wave of pressure to run up and down pipe work until the energy is dissipated. prevention of flooding. prevention of reverse flow on system shutdown. prevention of flow under gravity. relief of vacuum conditions.

• Body: WCB /SS 304
• Closure Plate: SS 304/316
• Hing Pin: SS 304/316
• Stop Pin: SS 304/316
• Ends: Wafer /Flanged to ANSI B 16.5/16.47 150#
• Hyd Body Test: 450 psig (32 kg /cm2)
• Hyd Seart Test: 315 Psig (22 kg/cm2
• Size: 80mm to 900mm

• Manufacturing Standard: BS 5153 (EN 12334) / IS 5312 Part 1 & 2
• Size Range: 40 to 1500 mm
• Pressure Ratings: PN6, PN10, PN16

These valves are very useful in preventing back flow of water to the pump. These valves have minimum head loss and can be very competitive in terms of long service life. These valves are very useful in waterworks pipelines to reduce hammer effect. Non slam and quick closing characteristics have made this product a very demandable one across markets. These valves are very useful in preventing back flow of water to the pump. These valves have minimum head loss and can be very competitive in terms of long service life. These valves are very useful in waterworks pipelines to reduce hammer effect. Non slam and quick closing characteristics have made this product a very demandable one across markets. FEATURES Swing check type design Rigid and sturdy design with minimum head loss Long service life and leak-tightness of high order Suitable for clear water having turibidity upto 3000 o ppm and temperature of 65 Centigrade (rubber to o bronze / stainless steel seating) and upto 95 Centigrade (Bronze/ bronze, stainless steel / stainless steel seating APPLICATIONS Used in waterworks piplines to reduce water hammer effect Preventing back flow of water to the pump

• Brand Name: Marvel
• Material: cast iron
• Size: 80mm length , 200mm
• Application: It is used in fire fighting system to draw water in over head tank.
• Code: 5571
• Weight: 3.2 Kg
• Features: It is used to prevent backward flow of water when the pump turned off

• Valve Size: 25 mm
• Packaging Type: Box
• Material: PP
• Media: Water
• Usage/Application: Industrial
• Shape: Cylndrical
• Brand: Pooja

Dual Plate Check Valves made from superior materials are available with us for supply. We also export this particular product to many of our clients who hail from near and far locations in the global market. Our products are well known for their quality and affordability. We are wholesale merchants and primarily deal only with orders that are of a reasonably large size. Our delivery services are reputed to be prompt.

• Material: Metal
• Application: Water Fitting
• Feature: Casting Approved, Investment Casting
• Automatic Grade: Manual
• Pattern: Plain

• Size Range: Class
• 2" - 24": 150
• 2" - 24": 300
• 2" - 18": 600
• 2" - 12": 900
• 2" - 12": 1500

We are manufacturing valves under brand name SABA. We also dealing in ZED make manual valves and Aira, Rotex make Automation products.   SABA make Swing Check Valves manufactured by us are made from the best of the metals. The designs of these valves are completely unique in comparison to other available in the market which directly increases its efficiency. These valves even work properly under tough and unyielding condition. These things make our products stand a way ahead of others available. We have a special quality analysis department which checks the quality. This has made us the most prominent wafer check valves manufacturer and suppliers in India.Swing Check Valves are having Bolted cover, Swing type disc. These valves are used to prevent flow reversal in piping systems. They are suitable for service in horizontal (flow up through valve only) piping runs. Swing Check Valves have low pressure drop and are best suited for moderate velocity applications. Correct sizing of swing check valves is important. Either too low a line velocity or too high a velocity can damage valve internals and shorten valve life.Swing Check Valves are suitable for all service media. Valves can also be supplied with counter weights and dash pot arrangement depending upon the condition and request.Standards Applicable : Design Standard : BS 1868/API-6D Testing Standard : API 598/BS EN 12266 -1 Face to Face : ASME B 16.10 End Connection : Flanged End : ASME B 16.5 Butt Weld End : ASME B 16.25 Pressure Temperature : ASME B 16.34 Material Structure : End Connection Flanged end raised face, Butt weld end, RTJ, etc.Shell : WCB, WC1, WC6, WC9, LCB, LCC, LC3, C5, C12, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastalloy, Inconel, Duplex Stainless SteelTrim : 13% Cr. Steel, 304, 304L, 316, 316L, 321, 347, Monel, Duplex Stainless Steel

Industrial Check Valves, vacuum relief valves, pilot operated valves

• Size Range: 50MM to 100MM
• Design: Flap Type

UPVC Solid Ball Valves are especially utilized for adjusting the flow of water, liquid and various other sorts of fluids in different industrial and domestic pipe and hose fittings. We design these valves sturdily design by using graded UPVC materials. To suffice the needs of our precious clients, we offer this range of valves in distinguished sizes, dimensions, connection ends and specifications after testifying on various quality parameters.

• Size: 50-100mm, 15-40mm
• Type: Pp Foot Valve
• Brand Name: MADHAV
• Material: PP
• Certification: ISO 9001:2008 Certified
• Application: Water Fitting
• Weight: 1-2kg
• Color: Red
• Pressure: High, Low, Medium
• Feature: Durable, Good Quality
• End Connection: Screwed
• Condition: New

forged check valves, Industrial Valves, gas flow control valves

• Brand Name: Mayur
• Material: Plastic
• Color: Red

• Material: Poly Propylene
• Color: Orange & Black
• Size: 50mm To 100mm
• Connection: Flanged
• Ball: Rubber Coating
• Nut Bolt: M.S

Foot Valve, Cast Iron Butterfly Valves, valve balls, Gate Valve, Air Valve

Check Valves, Rubber Unisex Household Gloves, Direct Acting Solenoid Valve

Check Valves, Globe Valves, butterfly valves blowdown valves

Non Return Valves, Anti Vibration Mounts, Epdm Rubber Compound

Swing Check Valves, wafer swing check valve, Y Strainer Valve, Y Strainers

lift check valves, Industrial Valves, Air Valves, Pressure Seal Valve

Leader Check Valve, C Brand Malleable Iron Pipe Fittings

Non Return Valve, Pneumatic Accessories, ball valve actuators, Globe Valve

Single Plate Check Valve, Gun Pipe

Check Valve, Industrial Valves, Gate Valve, Globe Valve, Ball Valve