Check Valves Dealers in Shahpur, Ahmedabad

• Features: Non-corrosive acetal body and guide. Insert connection. Features NITRILE (Buna-N) seal and stainless steel spring
• Temp Max: 200°F (90°C)
• Pressure Max: 150 PSI

We manufacture our products from quality basic supplies and the most leading edge technology in compliance to the international standards of quality. These are not just made keeping quality in mind but at very rigidly tested out for their quality to offer faultless products to the clients. These are ideally designed by our experts for unobstructed & easy flow of thick & tacky fluids. The non-interrupted direct flow enables minimal contact of the fluid flowing, without the buildup of the gluey fluid in the orifice to ascertain right velocity. The pulp valves manufactured by us are known for their aspects such as robust fabrication, high tensile strength& abrasion resistance, easy installation & maintenance, least requirement for maintenance and good durability. Our valves are prudently designed by our well-qualified professionals to provide smooth unhindered flow of viscid Fluids. We are the top Pulp Valves Exporter of India.

• Country of Origin: India
• Type: Industrial Valves
• Brand Name: UNIVERSAL
• Material: Cast Iron
• Certification: ISO 9001:2008 Certified
• Color: Blue,Red,Sky Blue,White
• Condition: New
• Driving Mode: Hydraulic
• Automatic Grade: Manual
• Valve Size: 1.1/2inch, 2inch, 3/4inch
• Size: 40MM TO 500MM

We deals in supplying of wide range of Non Return Valve.

Proline Make Disc Check Valve (Non Slam Check Valve) Open And Closed Quickly Against The Opposite Flow Acting On Disc & Provide The Full Flow In Line It Occupy Very Less Space And Provide Full Flow & Spring Will Prevent The Reverse Flow In Pipe Lines Zero Leakage With Soft Seated, Light In Weight And Easy Installation Testing Standard: API 598

single disc check valves, Diaphragm Valves, Knife Gate Valves, Pulp Valves

Catering to the customers needs with excellence, we, as a Supplier engaged in offering a qualitative array of Gunmetal Double Outlet. We understand that high-quality standards should be maintained throughout the offerings. And, for attaining this objective, we make use of superior-grade raw material for manufacturing the same. Our Gunmetal Double Outlet Hydrant Valve is manufactured as per the set industrial standards.

Dual plate check valves is most suitable foe water pumps, chemicals pupms and oil gas applications. Body of DPCV are CI, CS, SS304, SS 316 or any specific materials with the Disc of same materials as well as other materials.Dual plate NRV is soft seated with Nitrile,Neoprene,Silicon ,Viton etc.It is suitable for vaccum application.We have sizes from 50 mm to 900 mm.

• Material: Stainless Steel
• Size: 1/2" to 24" Flanged ends/Butt weld ends
• Brand Name: Suraj Steelmet
• Grade: CF3,CF3M,CF8,CF8C,CF8M,CD4MCU,CW12MV,AI BRONZE
• Operating Mode: Auto
• Standard: API 6D / BS 1868
• Type of End Connection: Bolted Cover, Swing Type Disc

• Valve Size: 1" to 6"
• Material: Cast Iron
• Type: CCIPT - Series (Cast iron piston type)
• Connection: Flanged
• Usage/Application: Ammonia
• Pressure: 300 PSI
• Brand: Super, Superfreeze, Danfoss
• Model: Globe type
• Model Name/Number: NRV
• Size: 25mm to 125 mm

Appiicarit Standards Steel Check Valves API 6D Steel Check Valves ISO 14313 Steel Valves ASME 81634 Face To Face ASME B16.10 End Flanges ASME B16.5 Butt Welding Ends ASME B16.25 Inspection and Test API 598/API 6D   Design Descriptions Bc, Bolted Cover Swing Type, Anti-rotation Disc Renewable Seat Rings Non-penetrate Disc Shaft Horizontal Or Vertical Service Flanged Or Butt Welding Ends     Materials Of Parts S. No. Part Name Carbon Steel ASTM Material 1/1/4cr-1/2 mo 1 Body A2113-WCB A217-WC6 2 Cover A216-WCB A217-WC6 3 Disc 1 Al 05-CR13 Al 82-F1 1 +HF 4 Hinge A216-WCB A217-WC6 5 Fork Part A216-WCB P21 7-W6 6 Seat Ring A105+CR13 Al 82-F11 +HF 7 Hinge Pin A276-420 A276-304 8 Disc Washer Carbon Steel A276-304 9 Disc Nut Carbon Steel A194-7 10 Disc Nut Pln Carbon Steel A276-420 11 Gasket Spiral wound (Graphite+304) 12 Stud A193-B7 A193-B18 13 Stud Nut A194-2H A194-7 14 Eye Bolt 2   Carbon Steel   Dimensional Datas Of Ansi Class 150 LB NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 36 in DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 900 mm L/L1 8 8.5 9.5 11.5 14 19.5 24.5 27.5 31 34 38.5 38.5 51 51 57 60 77 in (RF/BW) 203 216 241 292 356 495 622 966 787 864 978 978 1295 1295 1448 1524 1956 mm L2 8.5 9 10 12 14.5 20 25 28 31.5 34.5 39 39 51.5         in (RTJ) 216 229 254 305 368 508 635 711 800 876 991 991 1308         mm H 6 6.5 6.88 8 11.5 13.88 15.38 17 18.75 20.62 22.88 24.62 34.75 37 37 38.62 48 in   152 165 175 204 293 353 390 432 475 525 582 627 883 940 940 980 1220 mm Wt(kg.) 14 20 25 40 71 118 177 263 353 542 632 855 970 1600 1600 1990 2760 RF/RTJ   10 12 17 29 57 96 143 227 295 468 552 755 831 1420 1420 1760 2230 BW   Dimensional Datas Of Ansi Class 300 LB NPS 2 2/1/2 3 4 6 8 10 12 14 16 18 20 24 26 28 30 36 in DN 50 65 80 100 150 200 250 300 350 400 450 500 600 650 700 750 900 mm L/L1 10.5 11.5 12.5 14 17.5 21 24.5 28 33.00 34.00 38.5 40 53 53 59 62.75 82 in (F1F/BW) 267 292 318 356 445 533 622 711 838 864 978 1016 1346 1346 1499 1594 2083 mm L2 11.12 12.12 13.12 14.62 18.12 21.62 25.12 28.62 33.62 34.62 39.12 40.75 53.88 54 60 63.75   in (RTJ) 283 308 333 371 460 549 638 727 854 879 949 1035 1368 1372 1524 1619   mm H 6 6.5 6.88 8 11.5 13.88 15.38 17 18.75 20.62 22.88 24.62 34.75 35.88 37 38.62 48 in   152 165 175 204 992 353 390 432 475 525 582 627 883 910 940 980 1220 mm VVt(kg.) 16 23 29 46 82 136 204 302 405 625 730 985 1115 1465 1840 2290 3180 RF/RTJ   11 13 18 31 61 103 155 245 315 503 593 812 895 1205 1525 1895 2395 BW

• Material: Stainless Steel
• Media: Air, Water, Gas
• Temperature Of Media: High Temperature, Low Temperature, Medium Temperature
• Power: Manual
• Valve Size: 15 mm to 25 mm
• Seal Form: Auto Sealed
• Work Pressure: 1.6 MPa

The company is ranked amidst the leading Non Return Valves Manufacturers and Exporters in India. Our Non Return Valves are acclaimed by the global clients for their excellent efficiency and long life. The Non Return Valves, offered by us, are made from the best materials and as per set industrial standards. Known For : Higher gradesSuperb efficiencyExcellent durabilityLow maintenance » MaterialsManufacturing StandardBS 1868 / API 6D Test & InspectionAPI 598 / BS 6755 EndsFlanged to ANSI B 16.5 /BS 4504 / BS 10 End to end dimensionsANSI B 16.10 Pressure ratingANSI 150# - 2500# DIN PN6 - PN 250 » Materials Carbon Steel Low Carbon Steel High Temp. Steel Corrosion Resistant Steel Body WCB LCB, LC2 WC-1, WC-6, WC-9 CF8, CF8M, CF3, CN7M Trims 13%CR 13%CR / SS316 13%CR / Stellite SS304, SS316, H.F. (Stellite) Seats 13%CR 13%CR / SS316 13%CR SS304, SS316, 304L, 316L, Monel, Haste alloy

• Design Standard: API 600 / BS1414
• Size Range: 10 MM TO 50MM

Check Valve "HP" Check Valve are heavy duty, bolted cover plate with renewable seat ring and body mounted disc swing type are straight through flow which works automatically. If Opens by the force of pressure and closed by the force of gravity and back pressure. To reduce wear & noise problem size of valves should be select on the basis of flow conditions.

AMTECH™ forged Non Return Valve which is suitable for High pressure line of oil, gas, water, refining, steam etc. Non return valves are available in forged body A 105, F 22 ,F 11 ,F 304 ,F 316, and other special alloy steels.We have 800#,1500#,2500# design check valves.   Specification

• Feature: Dimensionally accurate,Smooth finish,Sturdiness

• Structure: Feeding
• Connection Type: Flanged
• Media: Water, Fuel, Air
• Finishing Type: Color Coated
• Brand: JEKON
• Usage/Application: Industrial
• Size: 1/8", 1/4", 3/8", 1/2"

The Dual Plate Check Valve is an all purpose non return valve that is stronger, lighter in weight, and smaller in size, compared to the conventional swing check valve or lift check valve. The Dual Plate Check Valve design is an outcome of attempts to solve the problems associated with conventional swing check valve and lift check valve. The Dual Plate Check Valve employs two-spring-loaded plates hinged on a central hinge pin. When the flow decreases, the plates close by the action of torsion spring before flow reversal takes place. This design offers the twin advantages of No Water Hammer and Non Slam simultaneously. All features put together make the Dual Plate Check Valve as the most efficient & versatile design.

• Valve Size: 1" to 48"
• Design Type: Wafer type
• Shape: Round
• Installation Type: Vertical
• Type Of Disc: S.G. Iron / M.S. / S.S.
• I Deal In: New Only

• Brand Name: Asiatic
• Material: Stainless Steel
• Media: Air

• Size: 1inch, 2inch, 3/4inch
• Material: Metal
• Application: Oil Fitting, Water Fitting
• Color: Grey
• Number Of Way: 2way, 3way, 4way
• Type: Swing
• Pattern: Plain

The company has achieved expertise as a Manufacturer, Exporter and Supplier of Swing Check Valves in Ahmedabad. The Swing Check Valves, offered by the company, are known for being the best as far as the quality and performance is concerned. The company offers a quality assured range of the Swing Check Valves at the market leading prices. Attributes Of Swing Check Valves Highly efficient Remarkable performance Excellent quality Highly durable

MANUFACTURING STANDARD: BS : 1868 & API 6D FACE TO FACE AS PER ANSI B 16.10 ENDS: FLANGED END AS PER ANSI B 16.5 R.F & BUTTWELD END AS PER ASME B 16.25 TESTED AS PER BS 6755 SIZES AVAILABLE FROM 15mm TO 600mm.

• End Connection: Flanged ends as per ANSI B 16.5 & 26” and above ANSI B 16.47 Series A & B 598
• Manufacturing Std: BS
• Testing & Inspection Std: API
• Face to Face: ANSI B 16.10 600
• Butt Weld Ends: As per ANSI B 16.25
• Shell wall Thickness: ANSI B 16.34

Special Features   With Stelliting With IBR Certification With Nace MR 0175   Technical Detail

• Media: Air
• Material: Aluminium
• Color: SILVER
• Size: 1/4 1/2
• Model Name/Number: 4V-220-08
• Item Code: 4V-220-08

• 2-3 COLOURS: ALL TYPE

We are Offering Focus On Specialty Segments to Offer a Wider Choice.

We are offering oswal check valves are heavy duty, bolted cover, renewable seat ring, and body mounted disc swing type. Valves are straight through flow which works automatically. They are opened by the force of velocity pressure and closed by the force of gravity and back pressure. The valves are single direction flow and restrains flow in opposite direction. Distortion, wear and noisy operation of the valve can be avoided by selecting the size of the valve on the basis of flow conditions. Swing check valves are best suited for moderate velocity operations. Swing check valves are normally designed for horizontal installations. It can be installed in vertical direction with flow in upward under the disc. There is no tendency for seat to gall because the disc meets flat surface without rubbing upon contact. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. Flow directions are marked as cast on the body for ease of installation. Swing check valves are adequate for all service media. Valves can also be supplied with counter weights and dash pot arrangement depending upon the condition and request.

NU-TECH cast steel valves are designed and manufactured to provide maximum service life and dependability. ALL check valves meet the design requirements of American Petroleum Institute standard API600 & API 6D.

• Specialities: Convenient working, Advanced technology used, Advanced technology used
• Material: Brass/Bronze
• End Connection: Screwed
• Usage/Application: Air
• Brand: SVR
•  :  

Stainless Steel Check Valves, Knife Gate Valve, Cast Iron Gate Valve

FOOTVALVE and HOSE COLLAR, Rice Jet Polisher, POLY GUARD CABLES AND WIRES