Gate & Sluice Valves Dealers in Ashram Road, Ahmedabad

Gate Valves valve -150 to 600 class in Flanged end , 800 to 2500 class in Threaded / buttweld/ socket weld end.Gate valves are generally designed to serve as isolation valves. In service, these valves are either fully open or fully closed. When Gate valves fully opened , the media which flows through the valve in a straight line with very little resistance. Gate valves must not be used in the regulation or throttling of flow media because of accurate control is not possible. Also , high-flow velocity of media in partially opened valves may cause erosion of the discs and seating surfaces area. The Vibration of wedge may also result in chattering of the partially opened valve disc. Gate valves are also operated by chain pulley when they mounted at height in plant. The Gate valves are used in thermic fluid with high temprature upto 350 degree

Amtech specialize in the safety valves, safety relief valves and relief valves. We offer our safety valves, safety relief valves and relief valves to a number of industries including, but not limited to chemical, petrochemical, refining, power, pulp and paper, oil and gas, sugar, hospitals and colleges worldwide

We are offering oswal gate valves. Oswal gate valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem with non rising hand wheel. Straight through bore design assures minimum turbulence, erosion and resistance to flow. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. These are widely suited for high pressure and temperature and variety of fluids. Gate valves are adequate for all service media along with hydrogen service, oxygen service, hydrocarbon service and nace applications. Other optional features like live loading, lantern ring, bleed holes, purging lines and other features are available on request.

• Brand Name: Aeroflon Engineers Private Limited
• Application: Industrial
• Compressor Type: Screw Compressor
• Diameter: 2mm
• Grade: 304
• Packaging Type: Box

We have unidirectional knife edge gate valves.The gate of knife edge gate valve is made from SS 304, SS 316,SS 410 and we can do the special treatment for lincrease the life span. A wide variety of hardened trim options are also available for the Gate, Seat and Wear Rings. KnifeEdge Gate Valves withstand high temperature & abrasive slurries in Mining, Steel, Power, Chemical, and Paper Industries Ideal for high-density Slurry Lines.We mfg special valves for the Power plants with quick opening design.We have soft seated valves with TeÛon ,Nitrile,EPDM,Viton,Silicon etc.

We are offering mvs knife edge gate valves are specially designed for tough applications. Mvs knife gate valves features a single piece full port cast stainless steel fully lugged body which is very robust in construction to cater to the extreme demanding applications and ensure greater flow capacity and minimal pressure drop. Mvs knife edge gate valves incorporate gates made of stainless steel and other superior alloys are ground with super surface finish on both sides to assure positive shutoff. The machined and highly finished gland pockets ensure a leak proof gland packing and perfect stem seal. Mvs high performance knife edge gate valves are available in uni-directional bi-directional design which provide better value and performance with many standard features which others lack.

forged steel

ISI marked Cast iron/Cast steel/Ductile iron sluice valve. Available in Non rising spindle and rising spindle type. Sizes ranges from 50 mm to 1200mm

• Media: Water
• Material: Cast Iron
• Brand Name: Radiant Flow
• Automation Grade: Manual

We are the leading manufacturer and suppliers of the Slide Gate Valves to our customers all over the country. These slide gate valves are used widely in industrial processes where a straight line flow of the industrial materials is to be maintained. These slide gate valves have a rectangular gate or wedge with planar sealing surfaces that makes them the perfect choice for industrial set ups. We are providing these slide gate valves to our customers at reasonable rates.

Scorpio Valves & Controls manufactures Steam Pressure Reducing Station. This steam pressure reducing station is manufactured in compliance with international quality standards using excellent quality raw material. This steam pressure reducing station is designed with high precision to maintain set dimensional accuracy in it and stringently tested on various quality parameters to ensure flawlessness.• Size:25NB x 50 NB to 250 NB x 350 NB• Pressure Range: 150 psig- 450 psig• Pressure Rating Class: 150, 300, 600 BS 10 Table H etc• Material:Cast Steel and Alloy steelSALIENT FEATURES:• Steam service with self regulating PRV• Steam service with PCV• Hydrogen service PRS• PRS for natural Gas• We are your single source for stations complete with piping and instrumentation. Our stations are supplied complete and ready to fit on your piping. We have a station to suit every need.• Our steam pressure reducing station are prefabricated manufactured ready to install units for steam system management. The pre-assembled steam pressure.• All upstream & down stream pipe work & fittings are adequately sized to ensure that only the required pressure drop occurs across the control valve itself.• Easy for maintenance

The company is one of the prominent Manufacturers, Exporters and Suppliers of Investment Casting Gate Valves in Ahmedabad. The company delivers the very best Investment Casting Gate Valves to the clients all over the world. Offering the Investment Casting Gate Valves in various sizes, the company can also makes these valves as per the drawings and samples provided by the clients. Size : ½� to 24� Pressure Rating : up to 600# Materials Used SSCIWCBGMAlloysDuplexInvestment casting or as per the project orders� requirement End Connections Flanges endScrewed endSocket weldGroovedTriclover or as per the clients� requirement

Sensus Metering Systems safety relief valves offer an economical installation for large large relieving capacity applications such as gas distribution systems, metering sets, and industrial applications. The Model 250-S and 250-DW are angled body safety relief valve with a large exit area for a high flow rate. They incorporate a deep molded diaphragm that provides maximum lift while not affecting initial relief.   The Model 257-S features the same "roll-out" diaphragm principle with a double ported single valve that has achieved such remarkable success in the widely used 441-57S and 461-57S regulators. The roll-out diaphragm is a combination of strength and flexibility in which diaphragm action is constantly matched with spring action. This design offers large capacity, tight seat and reseat, sturdy construction, no adjustments, and easy servicing

• Design Standard: API 600/BS 1414

Gate Valve "HP" Gate Valve are heavy duty, bolted bonnet, rising stem with non rising hand wheel, Also with straight through bore design assures minimum turbulence, corrosion and resistance to flow."HP" Gate Valve are available in wide range of sizes these are widely suited for high pressure and Temperature and variety of fluids.

Size 50 to 1300 mm Pressure PN 1.0 and PN 1.6 Conforming to IS : 14846 Rating PN 16 Conforming to BS 5163 Overview Kirloskar Brothers Limited is a leading designer and manufacturer of centrifugal pumps and pumping systems for the Industry sector. Features Rigid and sturdy design Low pressure loss Available in Non Rising as well as in Rising Spindle Type

• Brand Name: "KRISHNA"
• Valve Size: 1.5 to 14"
• Media: Air, Water, Gas, Fuel, Powder/Solids
• Material: Stainless Steel, Aluminium
• Condition: New
• Pressure: 150#,300#,600
• Temperature Of Media: Normal Temperature , High Temperature , Low Temperature , Medium Temperature
• Power: Manual

• Certification: ISI Certified
• Application: Gas Fitting, Oil Fitting, Water Fitting,INDUSTRIAL
• Pressure: High
• Feature: Casting Approved
• Warranty: 1 Year
• Structure: Safety

We are offering Safety Relief Valves Conventional ,High & low Pressure Threaded with close & open Bonnet and with cap or lever, Pilot Operated safety relief valve

• Size :: ½" to 2"
• Body :: Forged S.S. 304, 306 I.C. S.S. 304 / S.S. 316
• Presssure :: 200kg & 500kg
• Temp :: 80°C
• Media :: Air, Water,Gas, Oil & Gas

2/2 & 3/2, Way High Pressure Ball Valve

• Feature: Corrosion proof,durable,good quality

India is a country with rapidly growing industries. With booming industries, control valves like Butterfly Valve, Pinch Valve, Diaphragm Valves, Knife Edge Gate Valves, Pulp Valves are highly in demanded. For efficient and durable performance control valves must be made in compliance with the industrial norms. Also they should be fabricated utilizing latest techniques and machineries to have features and aspects that are intensely demanded by the industries. Our valves are highly preferred in the market because of their quality, performance and durability.

• Liquid in Tank:: Transformer oil
• Operating Pressure:: 0.42, 0.49,0.56 kg/cm² (Any one value as per order)
• Operating Tolerance:: 0.1 kg/cm²
• Operating Time:: Instantaneous
• Valve Resetting:: Automatic
• Operating Temperature:: 0 to 100°C (of Liquid in Tank)
• Environment:: Indoor or Outdoor
• Port Operating:: Nominal 70 mm

• Application: Industrial and Mobile
• Theory: Vane Hydraulic Pump
• Lead Time: 1 WEEK.
• Port: AHMEDABAD, MUMBAI, KANDLA, MUNDRA
• Model Number: T6C, T6D, T6E
• Structure: Vane Pump
• Packaging Details: EXPORT QUALITY PACKAGING IN CORUGATED OR WOODEN BOXES
• Usage: Oil
• Place of Origin: Andhra Pradesh, India
• Standard or Nonstandard: Standard
• NA: NA

• Size: 15mm To 50mm
• Brand Name: Racer
• Model: Stainless steel Gate Valve
• End Connection Type: Screwed

• Brand Name: GURUKRUPA ENGINEERS

These valves have discs in the shape of knife and are particularly applied to regulate the flow of dense viscid fluids and semisolids in the industries. This type of special knife design enables it cut through the fluids and semisolid material flowing. We are the leading Knife Edge Gate Valves Manufacturer of India. The special design of our valves made by our expert professionals make them highly preferred for regulating very abrasive & viscous fluids in the chemicals industries, the paper and pulp industries, sewage treatment plants, Textile as well as cement industries across the world.   These are preferred because of their perfectly smooth closure &tight shutoff functionality. We manufacture them making use of high grade basic materials as well as components sourced from the most reliable vendor of the market. These are made as per the latest technology at our state-of-the-art manufacturing unit. These are made in strict adherence to the industrial standards. These are made in standards as well as customized specifications as required by our clients. Our products are guaranteed for their flawlessness because these are quality tested and verified absolutely by our experts. We are also the leading Knife Gate Valve Exporter of India.

Y Type Control Valve, Y Type Flush Bottom Valve, Ci flanged ball valve

Pressure Reducing Valves, Ball Valve, Butterfly Valves, Check Valve

Gate Valve, Ball Valve, Butterfly Valve, Globe Valve