Vertical Pumps Dealers in Gidc Vatwa, Ahmedabad

• Materials: Stainless Steel, CI / WCB
• Capacity up to: 400 M3/Hr.
• Temp. up to: 120° C
• TDH up to: 55 MLC
• Working Pr. up to: 15 Bars
• Delivery Size up to: 150 mm
• Column Height up to: 10 mtr.

• Shape: Vertical
• Application: Industrial
• Voltage: 220V
• Material: Cast Iron

• Temperature: PPH 90 º TO 100 ºC.

The aptitude of pump to run dry eliminates single reason of interruption which is regularly attributable to the human component this feature is very convenient in process needing continuous transference of a corrosive fluid with a high gradation of reliability e.g. Disposal of acid effluent.No maintenance since the pump can even run dry indefinitely as there is no packing, bushes or internal Bearings. Polypropylene are manufactured by solid injection molding process with high pressure hence.

The Vertical Chemical Process pump is comparable hydraulic design to any conservative centrifugal pump. It differs in so far as it is always mounted in the vertical position. A limit is provided above the impeller and necessitate for any from of liquid seal is obylated by allowing a small leakage to escape by way of an overflow connection in the upper pump body return to suction vessel. The best option method of installation will relly upon the pumping application. Most effective and most widely adopted approach is to mount the pump  near the give supply tank at such a level that the impeller is flooded and the Vertical Chemical Process pump consequently pumped when the liquid reaches a certain height in the tank. The pump will deliver liquid until the suction pipe becomes exposed , when it will run dry until the chemical level is restored to the point where re-printing can take place, this cycle of  procedure  may be repeated for an indefinite period.       Operation Advantage of Vertical Process Pumps:- The noticeable main advantage is the removal of problems occur from the use of mechanical seal, placing box and internal putting. The capacity of pump to run dry gets rid of  one cause of  break down which is often applicable to the human factor . this aspect is very useful in process requiring  continuous transfer of a rust liquid with a high degree of consistency electronic|. Disposal of chemical  effluent. The Vertical Pocess pumps pushes lend itself to process incorporating programmed control of a pump discharge control device. The "controlled leakage" functions as an important liaison. The pump suffers no ill effects if the discharge valve is fully closed. The main gains to be produced from the use of  Vertical Chemical Process pump  are in the sphere of maintenance and resultant decrease in down time production losses. Typical continuation on the Vertical  pump is limited to lubrication of the driving. Range of Performance:- Since Vertical Process Pumps  do not have any packing rose bush or internal bearing, full benefit can be considered of accessible drive rates.. The pump may be run at 1450 and 2900 RPM correspondingly and a range of impeller diameter  for each and every  pump size gives a wide divide of presentation.  

We are offering varuna vertical open well submersible pumps are manufactured as per is: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency.

• Bore Well Size: O.W
• Out let Size: 2″

Vertical submersible pumps Specially designed efficient pump set to operate for longer duration and trouble free operations in working conditions. “PARESH” submersible pumps with water filled motors are cost effective, durable and energy efficient.

We manufacturer of submerged vertical process pump, are presenting our rang under “Vijay” Brand name The introduced submerged vertical process pump is invariably best bet for handling corrosive, non corrosive liquids without any failure, thanks to the PP (polypropylene) material of construction sharing excellent resistance against corrosive chemicals, makes it also illustrious as the polypropylene pump or a PP pump in the variegated industries.  Besides that, the closed type and semi open type impeller configuration augment hydraulic efficiency and reduces the thrust on rotating assembly, resulted in smooth and easy operations throughout its lifetime. The impeller casing of this pump is completely submerged in liquid and hence eliminates requirements of the priming or air venting during the operation. Other than, the vertical design of this pump requires minimum space for the installation and makes it the best bet, even in the industries to which space is an issue. This submerged vertical process pump is available in two different designs make it suitable for inside tank installation as well as outside tank installation. The gland less and vapor sealing configuration of this type of PP pump prevent the leakage of corrosive liquids and gases and hence promote in controlling the environmental pollution too.   Range of CoverageHead: Up to 40 MTRSFlow: Up to 50 M3 /HRMotor HP: 1HP to 7.5 HPMaterial of Construction: Poly Propylene, M.S., C.I., S.S. Operation Advantage of Submerged Vertical Process Pump: No mechanical seal stuffing box required All the wet parts are in P.P. & Teflon construction withstand corrosion & erosion. No foot valve necessary to lift from negative suction No leakage problem encountered, just like gland or mechanical seal Virtually no maintenance is required Easy alignment and enables easy operations Application"PHOSPHRIC ACID PALNT"H3PO4, H2SIF6, H2SO4, HF AND THEIR MIXTURES "GAS WASHING PLANT"SCRUBBED LIQUID CONTAINING F, CL, SO2, AMMONIA "WATER TREATMENT PLANT"ANY TYPES OF ACIDIC WATER LIFTING "M.S. VERTICAL PUMP" ARE USED FOR TRANSFER OF SULPHURIC ACID 98% OLUM, CLORO, NEPTHA

Vertical Gland Less/Seal Less Pump, similar in hydraulic design to any conventional centrifugal pump, it differ in, so far as restriction is provided, escape by way of an overflow Connection in the upper pump body & return to the suction line             MAINTENANCE FREE             Zero maintenance pump, eliminates the need for Seal and Gland Packing.   Leak proof and can run dry without damage of rotating parts.   Pump is seal less hance can run dry Minimum components makes maintenance easy           SPEED           This pumps are run at 2880 RPM.           RECOMMENDED             Pump to be mounted out side the suction tank in vertical position and not be submerged.   Leak proof and can run dry without damage of rotating parts.   Preferred selection for E.T.P. Because of Seal less design.   Ideally recommended for transfer of treated effluent.           TEMPERATURE RESISTANCE           PP 50° 60° CPPH 90° 100° CPVDF 100° 110° C

Varuna Vertical Open Well Submersible Pumps are manufactured as per IS: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency. The sturdy construction and design of the motor also gives shock-absorbing capacity during installation.   Vertical Openwell Submersible Pump Salient Features   Cast iron Stator body gives a robust design. Accurately machined on CNC machine for reliable performance and longer life. Stator and rotor of the monoset are vacuumed, impregnated with synthetic varnish and epoxy coated for corrosion resistance. Highly efficient hydraulic design. Provided with double eye-bolt for easy installation. Products are available with NRV, which reduces the thrust load of backpressure.   Application   Irrigation from open wells, specially where there is a wide fluctuation in water levels Civil and industries Community water supply from open wells Canals and rivers Agriculture

EVM Vertical Multistage pumps in AISI 304 – AISI 316L and cast iron   Vertical multistage pumps in AISI 304 (EVM), ASIS 316 (EVML) stainless steel and cast iron (EVGM) multistage motor driven pumps.  WRAS-approved standard version available: EVM 3-5-10-18.  Reliable quite and easy to maintain.  Used in residential, commercial, industrial, agricultural and fire-fighting pressure boosting systems.  In primary water treatment, reverse osmosis, filtration system etc..  Suitable for handling moderately aggressive fluids, filling boilers, washing, heating, refrigeration and air conditioning systems.  IEC standard motors available, robust constructions.   Technical Specifications ·         Max. working pressure : 16 bar, 25 bar, 30 bar only for EVM32 – EVM 45 ·         Max. liquid temperature range  :  -15oC - 120oC ·         Capacity up to 84 m3/hr  ·         Total Head up to 307m

• Pressure: 5 Kg / Cm2
• Head: 50 Mtr.
• Flow: 45 m3 / hr.
• Temp: : 70 °C
• M.O.C: PP, UHMWPE
• RPM: 1440 – 2880 RPM

Application Water treatment Plant, Electro Planting & Steel Rolling Mills, Loading / unloading like HCL, Sulphuric acid / Alkali, Caustic Liquid. Scrubbing of corrosive gasses like CI2, NH2, BR2, etc. Ideal for Circulation of chemicals in metal finishing industry.

• Features: No mechanical seal, stuffing box and internal bearings provided.

We bring forth wide-range of Vertical Glandless Pumps, which has a finest performance, reliable, corrosion resistance. Our company is widely recognized in the industry for our suitable supplies of the quantities. It is always been installed in the vertical position.Bhagwati Engineering is manufacturer of Vertical Glandless Pumps in India. The design of Vertical Glandless Pump is such that the requirement for any form of motorized seal or chock-a-block gland is eradicated by allocating a controlled leakage of the liquid that is being pumped to return to the suction tank by the route of an overflow connection in the upper body of the vertical glandless pump.

We are offering our clients V6 Deccan Submersible Pump Set, that are manufactured with strict quality control for years of efficient and reliable operation. The V6 Deccan Submersible Pump are unique in their design and conform to international standards.

Vertical Polypropylene Pump, Industrial Pumps

Vertical Less Pump, Vacuum Ejector Motor, Mud Pumps

Vertical Pump, Centrifugal Pump, Submersible Pump, pp pump, Pump

Vertical Pump, plastic pump, Polypropylene Pump, Magnetic Pump

Submerged Vertical Process Pump

Vertical Openwell Submersible Pump, multistage openwell submersible pump

Vertical Turbine Pump, Pressure Booster Pump, Worm Gear Box

Submerged Vertical Process Pump

Vertical Pressure Water Pump

Centrifugal Vertical Pumps, Thermic Fluid Pumps, Boiler Feed Pumps