Vertical Pumps Dealers in Hathijan, Ahmedabad

• Shape: Vertical
• Application: Industrial
• Voltage: 220V
• Material: Cast Iron

We are a quality conscious firm, thus never compromise on the quality of the offerings. In addition, we make use of quality tested raw material and modern work methods for manufacturing the same. Owing to our expertise in the domain, we are able to supply excellent quality centrifugal vertical submerged pumps at very reasonable price.

We are involved in Vertical Polypropylene Pumps that are designed by experts and have unique hydraulic design. The Vertical Polypropylene Pumps offered by us have an overflow connection in the upper pump body that returns to the suction line. Specialty Zero maintenance pumpEliminates the need for Seal and Gland PackingLeak proof Runs dry without damage of rotating parts Operational Speed 2880 RPM Recommended Pump to be mounted out side the suction tank in vertical position and not be submerged.Leak proof and can run dry without damage of rotating parts.Preferred selection for E.T.P. Because of Seal less design.Ideally recommended for transfer of treated effluent. Temperature Resistance PP 50° 60° CPPH 90° 100° CPVDF 100° 110° C Technical Specifications :ModelSection (mm)Delivery (mm)Impeller Die (mm)HPRPMHead in MTR Capacity in m3/hrPP 100VG252510001290007/11, 08/09, 10/06, 11/05, 12/03, 13/00PP 120VG404012002290010/24, 12/20, 15/12, 16/08, 18/00, 00/00PP 160RVG404015003290010/26, 15/20, 18/10, 20/05, 22/03, 24/00PP 160VG754016005290010/35, 15/30, 20/25, 25/15, 26/12, 31/00PP 170VG75501607.5290012/50, 20/38, 25/32, 30/25, 32/15, 35/00

We are offering our clients V6 Deccan Submersible Pump Set, that are manufactured with strict quality control for years of efficient and reliable operation. The V6 Deccan Submersible Pump are unique in their design and conform to international standards.

• Size: 25 x 25

Phosporic acid plants, Gas washing plants, Rayon plants, caustic joda plants for corrosive acids & basics, effluent treatment handling.Due to constant R & D activity, details are subject to change without prior notice.

We are offering varuna vertical open well submersible pumps are manufactured as per is: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency.

Pump is similar hydraulic design to any conventional centrifugal pump. It differs in so far as it is always mounted in the vertical position. A restriction is provided above the impeller and need for any from of liquid seal is obylated by allowing a small leakage to escape by way of an overflow connection in the upper pump body return to suction vessel. All the wet-end parts are in solid molded construction to with stand corrosion and erosion. The impeller is semi-open type used in our all-vertical pumps to suit both clear and polluted fluids.

The Vertical Chemical Process pump is comparable hydraulic design to any conservative centrifugal pump. It differs in so far as it is always mounted in the vertical position. A limit is provided above the impeller and necessitate for any from of liquid seal is obylated by allowing a small leakage to escape by way of an overflow connection in the upper pump body return to suction vessel. The best option method of installation will relly upon the pumping application. Most effective and most widely adopted approach is to mount the pump  near the give supply tank at such a level that the impeller is flooded and the Vertical Chemical Process pump consequently pumped when the liquid reaches a certain height in the tank. The pump will deliver liquid until the suction pipe becomes exposed , when it will run dry until the chemical level is restored to the point where re-printing can take place, this cycle of  procedure  may be repeated for an indefinite period.       Operation Advantage of Vertical Process Pumps:- The noticeable main advantage is the removal of problems occur from the use of mechanical seal, placing box and internal putting. The capacity of pump to run dry gets rid of  one cause of  break down which is often applicable to the human factor . this aspect is very useful in process requiring  continuous transfer of a rust liquid with a high degree of consistency electronic|. Disposal of chemical  effluent. The Vertical Pocess pumps pushes lend itself to process incorporating programmed control of a pump discharge control device. The "controlled leakage" functions as an important liaison. The pump suffers no ill effects if the discharge valve is fully closed. The main gains to be produced from the use of  Vertical Chemical Process pump  are in the sphere of maintenance and resultant decrease in down time production losses. Typical continuation on the Vertical  pump is limited to lubrication of the driving. Range of Performance:- Since Vertical Process Pumps  do not have any packing rose bush or internal bearing, full benefit can be considered of accessible drive rates.. The pump may be run at 1450 and 2900 RPM correspondingly and a range of impeller diameter  for each and every  pump size gives a wide divide of presentation.  

• Features: No mechanical seal, stuffing box and internal bearings provided.

We bring forth wide-range of Vertical Glandless Pumps, which has a finest performance, reliable, corrosion resistance. Our company is widely recognized in the industry for our suitable supplies of the quantities. It is always been installed in the vertical position.Bhagwati Engineering is manufacturer of Vertical Glandless Pumps in India. The design of Vertical Glandless Pump is such that the requirement for any form of motorized seal or chock-a-block gland is eradicated by allocating a controlled leakage of the liquid that is being pumped to return to the suction tank by the route of an overflow connection in the upper body of the vertical glandless pump.

• Application: Sand Gravel Mining
• Pressure: High Pressure , Low Pressure, Medium Pressure
• Automation Grade: Semi-Automatic, Fully Automatic, Manually Automatic
• Condition: New,Old
• Driven Type: Electric, Hydraulic
• Color: Grey , Silver, Black

• Bore Well Size: O.W
• Out let Size: 2″

Vertical submersible pumps Specially designed efficient pump set to operate for longer duration and trouble free operations in working conditions. “PARESH” submersible pumps with water filled motors are cost effective, durable and energy efficient.

EVM Vertical Multistage pumps in AISI 304 – AISI 316L and cast iron   Vertical multistage pumps in AISI 304 (EVM), ASIS 316 (EVML) stainless steel and cast iron (EVGM) multistage motor driven pumps.  WRAS-approved standard version available: EVM 3-5-10-18.  Reliable quite and easy to maintain.  Used in residential, commercial, industrial, agricultural and fire-fighting pressure boosting systems.  In primary water treatment, reverse osmosis, filtration system etc..  Suitable for handling moderately aggressive fluids, filling boilers, washing, heating, refrigeration and air conditioning systems.  IEC standard motors available, robust constructions.   Technical Specifications ·         Max. working pressure : 16 bar, 25 bar, 30 bar only for EVM32 – EVM 45 ·         Max. liquid temperature range  :  -15oC - 120oC ·         Capacity up to 84 m3/hr  ·         Total Head up to 307m

• Pressure: 5 Kg / Cm2
• Head: 50 Mtr.
• Flow: 45 m3 / hr.
• Temp: : 70 °C
• M.O.C: PP, UHMWPE
• RPM: 1440 – 2880 RPM

Application Water treatment Plant, Electro Planting & Steel Rolling Mills, Loading / unloading like HCL, Sulphuric acid / Alkali, Caustic Liquid. Scrubbing of corrosive gasses like CI2, NH2, BR2, etc. Ideal for Circulation of chemicals in metal finishing industry.

Varuna Vertical Open Well Submersible Pumps are manufactured as per IS: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency. The sturdy construction and design of the motor also gives shock-absorbing capacity during installation.   Vertical Openwell Submersible Pump Salient Features   Cast iron Stator body gives a robust design. Accurately machined on CNC machine for reliable performance and longer life. Stator and rotor of the monoset are vacuumed, impregnated with synthetic varnish and epoxy coated for corrosion resistance. Highly efficient hydraulic design. Provided with double eye-bolt for easy installation. Products are available with NRV, which reduces the thrust load of backpressure.   Application   Irrigation from open wells, specially where there is a wide fluctuation in water levels Civil and industries Community water supply from open wells Canals and rivers Agriculture

Vertical Pump, Submersible Pump, pp pump, Pump

Vertical Pump, plastic pump, Magnetic Pump, seal less pump

Vertical Polypropylene Pump, Volute Centrifugal Pump

Vertical Less Pump, Vacuum Ejector Motor, Mud Pumps

Submerged Vertical Process Pump

Pressure Booster Pump, NORD Geared Motors, Dewatering Drainage Pump

Vertical Pressure Water Pump

Submersible Pump, multistage openwell submersible pump

Centrifugal Vertical Pumps, Boiler Feed Pumps, Rotary Gear Pump

Submerged Vertical Process Pump