Vertical Pumps Dealers in Rakhial, Ahmedabad

• Head: Up to 40 Mtr
• Capacity: Up to 60 M3/hour
• Discharge Size: 40 mm & 50 mm
• Sealing: Glandless, Seal-less
• Pump MOC: PP/PVDF
• Type: Verticle

How It Works Glandless pump:- is designed vertically. Liquid from the suction line passes through impeller to the discharge line with the required flow and head / pressure. While excess liquid enter the rear plate cover €“ and is diverted back to the mothertank through overflow outlet arrangements. Hence, the design ensures total solution of leakage problem. The motor assembly is also protected against damages due to leakage of liquid. Glandless pumps ensures ensures excellent performance while handling corrosive and hazardous chemicals. Leak-proof performance ensures better safety measures. Helps to maintain pollution control conditions. No damage on the floor, maintains cleanliness. Designed to save floor space. Various priming attachments available to suit varied critical application. Matrials Range S.S €“ 316 ALLOY 20 HAST ALLOY €“ C MONEL CAST STEEL CAST IRON €¢ Chemical Resistant : All contact parts are made from polypropylene with PTFE sealing-rings.Provides excellent resistance to corrosive hazardous chemical liquids like HCL, H2 so (30% to 80%), HNO The pumps are Specially designed to handle nearly all corrosives and erosives easily ;andefficiently contnuous and intermitent service. High temperature service : Maximum woriking temperature is 110o c. Bearing free design for handling abrassive in solutions. Motors are flange mounted Single or Three phase TEFC from 1 HP to 20 HP. No metal in contact with solution. No danger of corrosion or contamination. All models operate at 1450 rpm / 2900 rpm (variable speed motors available ). Dynamically balanced impeller made from glass- filled reinforced engineered plastic. Materials Range POLYPROPYLENEPVDFUHMW Application Fields Glandless pump:- are in extensive use in the fields of Pollution Control, Fliteration, Trasferring Corrosive Chemicals, Slurries, Plating Bars, Sewage, Waste Water Treatment Plant etc. Special Features Capacity up to 250 m3 / hr. No mechanical seal or gland packing used. Can run dry without any damage. Self draining. Head range up to 60 mtrs. No range up to 60 mtrs. No bearing on the pump side - No wear. No need to maintain minimum flow. Designed to save floor space.

Inline Pump & Boster Pump Genral       "SHUKAN PUMPS" Range SPP And EY Series Inline Pump is a Horizonatal Single Stage Centrifugal Pump.Foot Mounted And Centerline Mounted and top Centerline Delivery Branch. The Complete Pump Rotating Element Can be withdrawn towards the motor end without disturbing the suction or delivery pipelines,due to'BACK PULL OUT DESIGN.' The motor remains fixed to base plate.the pump raotating elements can easily be dismantled into its components after reassembly no time consuming re-alignments is necessary. 'Pump Impiller' closed Or Semi-Open Radial Impiller Specially Designed For Low NPSH Requirments. Hydralically Balanced by Back vanes, or in the case of large impeller diameters by balancing holes and wear ring on both sides.Reliable fixing of impeller on the shaft by impeller nut and positive locking of impeller nut by means of threaded insert.   Inline Pump & Boster Pump Applications       Chemical Process Industries Organic & Inorganic Liquids Refineries Fertilizer Plants Dyes & Intermediates Bulk Drugs And Pharmaceutical Effluent Treatment Plants,Enviorement Plant Heating And Air Conditioning Plants Cooling Towers Sugar Plant Fire Fighting Water Tratment Plants Volatile Liquids Plants Pulp And Paper Mill , Textile Industries, Power , Steel Plants Cement Plants Fiber Plants,Starch Product Process Industries Dyeing Process Industries Thermic Fluid Heating System Plant Hot Water Plants etc... Oil Extraction And Waste Oil Refineries           Inline Pump & Boster Pump Operating Range         Speed - N - 960/1450/2900rpm at 50 Hz & 1150/1750/3500 rpm at 60Hz Capacity - Disharge- Up To 700 M3/Hr. HEAD - Up To 150 Mtr. Pump Sizes - DN- 25 mm to 300 mm. Temperature Up To 400° C         Inline Pump & Boster Pump Material of Construction           Graded Grey Cast Iron Carbon Steel ( WCB) Alloy Steel CF8M & CF8(SS-316,304)   SG IRON AND CAST STEEL CF3 CF3M(SS-316L) Alloy 20.etc.,           Inline Pump & Boster Pump Optional Accessories       M.S. Fabricated Base Frame/Flexible Coupling/Coupling Guard/Foundation Bolt.

• Payment Methods: Cash, COD, DirectDebit
• Advantage: Low power consumption, High Capacity, Enable effective solutions
• Motor Power: 1 HP to 5 HP
• RPM: 2900 RPM & 1450 RPM

• Features: Vertical pumps require a minimum of NPSH since the lowest impeller is submerged in the liquid.

vertical pumping applications require the units be available in a variety of pumping configurations to meet user needs. Fairbanks Morse meets these demands by providing pump bowls from V-6,V-8,V-10 in diameter. Turbine bowls can be staged in series to produce the necessary discharge pressures.Materials of construction include cast iron, bronze, stainless steel and G.I Pipes or other machineable materials. Wear rings are available to provide a renewable surface.Open line shafts allow the product to lubricate the shaft bearings. Enclosed line shafts can provide external water flush, oil, or grease-bearing lubrication. Threaded or flanged column and line shaft assemblies are available in both short and deep-set applications.Drive shafts extending through the discharge head can be sealed using either packing or mechanical seals. A wide range of mechanical seal designs are available along with an assortment of packing box designs, including those for high-pressure applications. Fairbanks Morse also offers an array of discharge head designs, including cast iron or fabricated steel construction, above-or below-ground discharge, and flanged or plain-end discharge connections.Vertical turbine pumps can be driven by vertical monoblock motors, vertical solid-shaft motors, or through right-angle gears by an internal combustion engine, steam turbine, or horizontal motor. operate with gas kate and wind-mill.When vertical monoblock drivers are used, impeller-to-bowl clearances can be maintained with an adjusting nut located at the top of the driver. When vertical solid-shaft drivers are utilized, impeller clearance is regulated with an adjustable coupling.

Our ultimate quality Vertical Open Well Set products are fabricated with qualitative materials & elements. These are based on the cutting edge technology of the industry. These can be easily installed at the bottom of well without necessitating suction pipes. These have dynamically balanced rotors as well as impellers to zero vibration &noiselesslyworking pumps are designed by our experts to ensure optimal functioning in a very safe and reliable way with preferable aspects. Thecompact design makes it ideal for lowestlevel ofwater.

• Country of Origin: Made in India
• Brand Name: Farmtech

We are involved in Vertical Polypropylene Pumps that are designed by experts and have unique hydraulic design. The Vertical Polypropylene Pumps offered by us have an overflow connection in the upper pump body that returns to the suction line. Specialty Zero maintenance pumpEliminates the need for Seal and Gland PackingLeak proof Runs dry without damage of rotating parts Operational Speed 2880 RPM Recommended Pump to be mounted out side the suction tank in vertical position and not be submerged.Leak proof and can run dry without damage of rotating parts.Preferred selection for E.T.P. Because of Seal less design.Ideally recommended for transfer of treated effluent. Temperature Resistance PP 50° 60° CPPH 90° 100° CPVDF 100° 110° C Technical Specifications :ModelSection (mm)Delivery (mm)Impeller Die (mm)HPRPMHead in MTR Capacity in m3/hrPP 100VG252510001290007/11, 08/09, 10/06, 11/05, 12/03, 13/00PP 120VG404012002290010/24, 12/20, 15/12, 16/08, 18/00, 00/00PP 160RVG404015003290010/26, 15/20, 18/10, 20/05, 22/03, 24/00PP 160VG754016005290010/35, 15/30, 20/25, 25/15, 26/12, 31/00PP 170VG75501607.5290012/50, 20/38, 25/32, 30/25, 32/15, 35/00

• Country of Origin: Made in India
• Model Name/Number: LCRH and LCRNH Series
• Brand: Lubi
• Head Size: 500 m
• Max Flow Rate: 180 m3/h
• Material: Cast Iron
• Maximum Speed Of Rotation: 2900 RPM
• Power Rating: 0.37 to 75 kW
• Features: The pump construction enables the rotating parts to be removed and serviced without dismantling the suction and discharge pipe work. The pump casing have material of construction of Cast Iron FG 260 or CF8.

vertical sealless glandless pump, magnetic chemical process pump

We are offering our clients V6 Deccan Submersible Pump Set, that are manufactured with strict quality control for years of efficient and reliable operation. The V6 Deccan Submersible Pump are unique in their design and conform to international standards.

Varuna Vertical Open Well Submersible Pumps are manufactured as per IS: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency. The sturdy construction and design of the motor also gives shock-absorbing capacity during installation.   Vertical Openwell Submersible Pump Salient Features   Cast iron Stator body gives a robust design. Accurately machined on CNC machine for reliable performance and longer life. Stator and rotor of the monoset are vacuumed, impregnated with synthetic varnish and epoxy coated for corrosion resistance. Highly efficient hydraulic design. Provided with double eye-bolt for easy installation. Products are available with NRV, which reduces the thrust load of backpressure.   Application   Irrigation from open wells, specially where there is a wide fluctuation in water levels Civil and industries Community water supply from open wells Canals and rivers Agriculture

We are offering varuna vertical open well submersible pumps are manufactured as per is: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency.

• Type: Vertical Pumps
• Shape: Vertical
• Application: Constructional Use, Industrial
• Voltage: 110V, 220V, 380V
• Fuel: Electric
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw
• Pressure: 0-10bar, 10-20bar, 20-30bar, 30-40bar
• Warranty: 1 Year, 2 Years

Vertical Glandless Pump, metallic pumps, Single Spring Seal

Product features  Easy to install  Enhanced efficiency with all the advantages of mounting the prime mover and pump integrally on the same shaft.  The multistage vertical open well submersible monoblock can be placed at the bottom of the well. This arrangement does not require suction pipe.  Dynamically balanced rotors and impellers ensure vibration free performance and enhanced life.  Water can also be drawn from a borewell which is bored at the bottom of the openwell by inserting a suction pipe into the borewell and providing a cooling tank arrangement to keep the monoblock submerged in water.   Applications Irrigation Drinking water supply Industrial water supply Cooling water circulating systems   Technical Data

Vertical Pumps, Chemical Process Pump Plastic, mono block pumps

Lift Pumps, Bearing, engine liner, Engine Parts, Engine Piston

Vertical Openwell Submersible Pump, multistage openwell submersible pump