Vertical Pumps Dealers in Ahmedabad

“mvgp” pumps are vertical molded polypropylene corrosion resistant pumps.pumps for leakproof and maintenance free pumping of corrosive and abrasive liquids.   principal of vertical glandless pump the “malhar” pump is similar hydraulic design to any conventional centrifugal pump. It differs in so far as it is always mounted in the vertical position. A restriction is provided above the impeller and need for any from of liquid seal is obylated by allowing a small leakage to escape by way of an overflow connection in the upper pump body return to suction vessel. the most suitable method of installation will depend on the pumping application. The simplest and most widely adopted method is mount the pump close to the feed tank at such a level that the impeller is flooded and the pump therefore pumped when the liquid reaches a certain height in the tank.the pump will deliver liquid until the suction pipe becomes uncovered , when it will run dry until the liquid level is restored to the point where re-printing can take place,this cycle of operation may be repeated indefinitely. Contact vertical glandless pump supplier, vertical glandless pump manufacturer today. The vertical glandless pump  is vertical molded polypropylene corrosion resistant pumps.pumps for leakproof and maintenance free pumping of corrosive and abrasive liquids.   operation advantages of glandless pump • the recognizable leading improvement is the deletion of problems get to your feet from the use of powered seal, insulation box and inside bearing. • the aptitude of pump to run dry eliminates single reason of interruption which is regularly attributable to the human component this feature is very convenient in process needing continuous transference of a corrosive fluid with a high gradation of reliability e.g. Disposal of acid effluent. • the glandless pumps lend itself to process incorporating automatic control of a pump discharge valve. The “controlled leakage” acts as an integral by-pass. The pump suffers no ill effects if the discharge valve is partially or fully closed. • the maximum main improvements to be derivative from the use of glandless pump are in the province of maintenance and following reduction in down time invention victims. Normal maintenance on the glandless pump is confined to lubrication of the driving.   sailent features of vertical glandless pump • no mechanical seal, stuffing box and internal bearings provided. • no maintenance since the pump can even run dry indefinitely as there is no packing, bushes or internal bearings. • reduction of downtime production losses in view of above features. • all the wet-end parts are in solid molded construction to with stand corrosion and erosion. • the impeller is semi-open type used in our all-vertical pumps to suit both clear and polluted fluids. • pump mounted outside the suction tank and is not submerged type. • polypropylene are manufactured by solid injection molding process with high pressure hence.   temperature resistance • pp 50º to 80 º c • pph 90 º to 100 ºc • pvdf 100º to 115ºc   range of performance • because glandless pumps do not have any packing bush or internal bearing, full advantage can be taken of available drive speeds. The pump may be run at 1450 and 2900 rpm respectively and a range of impeller diameter for each pump size gives a wide spread of performance. • in general the range cover flow up to 100m3/hr. And discharge head up to 50 meters.

• Features: Vertical pumps require a minimum of NPSH since the lowest impeller is submerged in the liquid.

vertical pumping applications require the units be available in a variety of pumping configurations to meet user needs. Fairbanks Morse meets these demands by providing pump bowls from V-6,V-8,V-10 in diameter. Turbine bowls can be staged in series to produce the necessary discharge pressures.Materials of construction include cast iron, bronze, stainless steel and G.I Pipes or other machineable materials. Wear rings are available to provide a renewable surface.Open line shafts allow the product to lubricate the shaft bearings. Enclosed line shafts can provide external water flush, oil, or grease-bearing lubrication. Threaded or flanged column and line shaft assemblies are available in both short and deep-set applications.Drive shafts extending through the discharge head can be sealed using either packing or mechanical seals. A wide range of mechanical seal designs are available along with an assortment of packing box designs, including those for high-pressure applications. Fairbanks Morse also offers an array of discharge head designs, including cast iron or fabricated steel construction, above-or below-ground discharge, and flanged or plain-end discharge connections.Vertical turbine pumps can be driven by vertical monoblock motors, vertical solid-shaft motors, or through right-angle gears by an internal combustion engine, steam turbine, or horizontal motor. operate with gas kate and wind-mill.When vertical monoblock drivers are used, impeller-to-bowl clearances can be maintained with an adjusting nut located at the top of the driver. When vertical solid-shaft drivers are utilized, impeller clearance is regulated with an adjustable coupling.

AMTVPP – SERIES PUMPS ARE DESIGNED AND MANUFACTURED BY AMBICA MACHINE TOOLS TO MEET CUSTOMER SPECIFIC REQUIREMENT WITH OPTIMUM STANDARDIZATION. IT'S A VERTICAL MOLDED POLYPROPYLENE CORROSION RESISTANT PUMPS. » APPLICATION › WATER TREATMENT PLANT › EFFLUENT TREATMENT › FILTER PRESS FOR DYES AND CHEMICALS › FERTILIZER PLANTS THERMAL AND ATOMIC POWER PLANTS › DRUGS & PHARMACEUTICAL INDUSTRIES. › RESCALING OF TUBES. › SCRUBBING OF CORROSIVE GASES LIKE CL2, BR, I SO2, NH3, F2 ETC. › EXCELLENT FOR VACUUM EJECTORS › TRANSFERRING OF CONCENTRATED HCL FROM ROAD TANKERS › PAPER & PULP INDUSTRIES › PICKLING PLANTS & CAUSTIC SODA PLANTS » SPECIAL FEATURES › CAN RUN DRY DUE TO ABSENCE OF SHAFT SEALS › POLYPROPYLENE ARE MANUFACTURED BY SOLID INJECTION MOLDING PROCESS WITH HIGH PRESSURE HENCE. › EASY TO DISMANTLE AND RE-ASSEMBLE FOR MAINTENANCE.

• Production Capacity:: As per order

Vertical propeller pump are of rugged, heavy-duty construction designed to successfully operate in a multitude of applications requiring the movement of a high volume of water at a low discharge pressure.Applications :They are used extensively for pumping water from sources including lakes, cooling ponds, tanks, rivers and oceans. These applications include raw water intake, dewatering, storm water removal, and flood control.

• Brand Name: Vertical Polypropylene Sump Pumps

We offer vertical polypropylene sump pumps. Being a well established-organization, we are engaged in manufacturing, exporting & supplying a distinguished range of vertical sump pumps. Our offered pumps are intricately designed under the vigilance of skilled professionals using quality tested raw material and sophisticated technology in line with the international quality standards. Clients can avail this range in various designs, shapes and sizes at market leading price within given period of time. reliable engineers are expertise in manufacturing of vertical sump pumps, design of pump is sturdy and parts are with long life, manufacturers & exporters vertical sump pumps. submerged vertical centrifugal pump: reliable vertical pumps are centrifugal type of single stage with semi open impellers at bottom. Handling liquids, containing solids, have a tendency to polymerize or crystallize special features: no mechanical seal stuffing box required all the wet parts are in p.p. & teflon construction with stand corrosion & erosion. no foot valve required to lift from negative suction no. Leakages problem just like gland or mechanical seal normal maintenance easy alignment heavy duty bearing bracket. centrifugal, quiet, vibration free in m.s. Or s.s. Pump shaft are en-8 or ss-316 impeller are semi-open type hydraulically balanced by back wanes or in the case of large impeller diameters by balancing holes and ware rings both sides in p.p. Pump shaft are quoted with p.p. Sleeve supported in upper part by heavy ball bearing and in the lower part by a bearing bush and according to the shaft length. They are provided with an intermediate bush specifications: ----- up to 40 mtrs material of construction flow up to 50 m3 hr ------ motor hp 1hp to 20 hp poly propylene, m.s., c.i., s.s. application: chemical industries petrochemicals refineries fertilizers

• Head: Up to 55Mtr
• Capacity: 2000 LPM
• Sealing: Mechanical Seal Fitted
• Operating Temp: Up to70 Degree
• Rating: 0.75 kw to 15 kw
• Insulation: Class B/F
• Protection: IP44 / Ip55
• MOC: CI , SS 304

• Automatic Grade: Semi Automatic
• Warranty: 1 Year
• Application: Industrial
• Advantage: Easy to Operate
• Performance: Optimum
• Speciality: Rust resistance

Salient Features Submerged in water permantatly so no need of separate cabin Compact design suitable for minimum water level It also works on low voltage Noiseless and vibration free operation Installation without foot valve Easy installation and servicing

• Type: Vertical
• Certification: CE Certified
• Application: Industrial
• Voltage: 220V
• Fuel: Electric
• Power: 1-3kw
• Warranty: 1 Year

We are the main supplier of this product.

• Motor Phase: Three Phase
• Power Source: AC Powered
• Power: 0.5 HP- 7.5 HP
• Sub Section: 65mm, also available in 80mm

Our ultimate quality Vertical Open Well Set products are fabricated with qualitative materials & elements. These are based on the cutting edge technology of the industry. These can be easily installed at the bottom of well without necessitating suction pipes. These have dynamically balanced rotors as well as impellers to zero vibration &noiselesslyworking pumps are designed by our experts to ensure optimal functioning in a very safe and reliable way with preferable aspects. Thecompact design makes it ideal for lowestlevel ofwater.

The 'VIRAJ' type "VCP" Non-Clog Vertical Slurry Pump caters to the requirements of various industries such as Collieries, Mining, Sugar, Chemical, Fertilizer, Paper, Food, Steel, etc. The Vertical Slurry Pumps are also used in Sewage Treatment Plants for dealing with crude sewage and other liquids that contain solids or semisolids. The Vertical Slurry Pumps have maximum suspension length of 8 meters approx. It is measured from bottom of mounting plate to the centre line of the pump. By using the float switch or automatic level control unit, the Vertical Slurry Pumps work automatically. Our Vertical Slurry Pumps are available in grease, oil, and water lubrication system. Application : Steel Plant & Power PlantPharmaceuticals & Bulk DrugsRefineriesPaints & DyesEffluent treatment Chemical IndustiresPetrochemicalsSugar & MiningConstructionMunicipal corporation/Nagar PalikaDesalinationRaw Water HandlingFertilizer Plants

• Shape: Vertical
• Application: Industrial
• Voltage: 220V
• Material: Cast Iron

• Materials: Stainless Steel, CI / WCB
• Capacity up to: 400 M3/Hr.
• Temp. up to: 120° C
• TDH up to: 55 MLC
• Working Pr. up to: 15 Bars
• Delivery Size up to: 150 mm
• Column Height up to: 10 mtr.

• Size: 25 mm to 125 mm

We manufactured vertical pumps for the applications with low net positive suction head, cryogenic temperatures where vertical lift is required and in also in sump and cooling water services. Our vertical pumps is specially designed for service in water, chemicals, sewage and slurries. Vertical pumps are cover a wide range of hydraulic condition to meet virtually every pumping service in the industry and optimum efficiency.

Installation: 100 mm to 150 mm diameter bore wells Lift water: up to 6 m above the ground level Rated Discharge: 900 LPH @ 40 stroke per minute Maximum installation depth: 80 m

• Capaicty: Up to 300 M3/hr
• Head: Up to 35 mtr
• Discharge Size: Dn 25 to 125 mm
• Temperature: Up to 50c
• Speed: Up to 2900 rpm

• Head Range: Up to 45 Meter
• Capacity Range: Up to 2000 Ipm
• Sealing Arrangement: Mechanical Seal
• Operating Temperature: Up to 70° C
• Rating: 0.75 Kw to 15 Kw (2 Pole)
• Supply Sysytem: 3 Ø - 380 / 415 Volts - 50 / 60 Hz - A.C.
• Insulation: Class B / F
• Enclosure: Totally Enclosed Fan Cooled (TEFC)
• Rotor Type: Squirrel Cage Rotor (SCR)
• Operational Duty: S1
• MOC: Grey Cast Iron, Bronze, Stainless Steel SS 316/304
• Custom Built Design: Motors with different supply voltage and supply frequency can be offered on request.

• Max. capacity: 1500 m3/h (6600 GPM)
• Max. pressure: 16 bar (232 psi)
• Max. temp: 160 °C (320 °F)
• Max. speed: 3600 rpm

CombiSump vertical pump with dry motor EN 733, EN 22858 and API 610 Max. head : 160 m (525 ft) [35 bar (508 psi) API610] Materials: cast iron, nodular cast iron, bronze, stainless steel, carbon steel, 13% Cr-steel

• Type: Vertical Sealless Glandless Pump
• Shape: Vertical
• Color: White
• Fuel: Electric
• Condition: New
• Automatic Grade: Manual
• Power: 7-9kw
• Pressure: 0-10bar
• Warranty: 1 Year

vertical seal less gland less non-metallic centrifugal pump application :- scrubber application , acidic slurry transfer pump , etching liquid transfer pump , chemical circulation moc available :- pp , pe , ptfe application salient feature :- no magnet , no mechanical seal , no gland dry running particle handle - 1mm less rotating parts .

• Type: Air Vane Motor
• Material: Iron.Metal.Copper
• Weight: 500kg
• Color: Sky Blue
• Condition: New
• Application: Industrial Usage
• Driven Type: Pneumatic
• Feature: Durable, Easy To Fit, Premium Quality, Rust Proof
• Warranty: 1Year
• Motor Horsepower: 5kw
• Head: 28 mtr
• Usage/Application: Industrial
• Material: Cast Iron

We are proud to introduce our self as the largest supplier of ftt pumps. Since from 1985, we are in pump business and catering the customers for their needs in high pressure, flow and temperature pumping. To fulfill different needs of different customers, we have variety of product range from different manufacturers. Find followingb details for ftt make vertical centrifugal multistage inline pumps: max flow: 8 m3hr and head: 220 mtr. Applications: â�¢ cleaning â�¢ r. O. System â�¢ boiler feed â�¢ fire fighting â�¢ water supply water distribution â�¢ industrial filtration â�¢ cooling system chilling plant â�¢ water treatment â�¢ pressure boosting â�¢ pressure jet cleaning â�¢ feed pump r. O. Â�¢ refrigeration systems

• Capacity: Up to 50 M3/hr
• Temperature: 80°C

No. 1 Choice for effluent treatment plants since are no mechanical seals glands,Can run dry due to absence of shaft seals.Can run dry due to absence of shaft seals.Water treatment plant, effluent treatment plant, elecro plating, picking & steel rolling mills.Excellent for transfer and loadign - unloading like HCL, Sulphuric AcidAlkai, Caustic Liquid.Scrubbing of corrosive gases like NH3, CO2, SO3, SO2, SO2, I2, F2, Br2, Cl2, etc.For handling liquids in various industries like textile, paper, cellulose, sugar, steel, food, having temperature range, materials, etc. Ideal for circulation of chemical in metal finishing industry.Natural choice for pickling line & scrubber in steel plants.High capacity transfer pump, filter press for dyes & chemicals, descaling, oil.

• Country of Origin: Made in India
• Features: These pumps shall be designed to be mounted on coolant lubricant tanks so that the pump end is immersed in the coolant lubricant
• Brand Name: Lubi
• Speed: 2900 RPM
• Head: 212 m
• Max Flow Rate: 8.5 m3/h
• Model Name/Number: LIR Series
• Power Rating: 0.37-5.5 kW

• Country of Origin: Made in India
• Brand: Lubi
• Material: Cast Iron
• Motor Phase: Single
• Power Source: Electric
• Motor Power: 50 Hz
• Color: Black
• I Deal In: New Only

FILTER PRESS FOR DYES AND CHEMICALS, FERTILIZER PLANTS THERMAL AND ATOMIC POWER PLANTS. SCRUBBING OF CORROSIVE GASES LIKE CL2, BR, I SO2, NH3, F2 ETC. TRANSFERRING OF CONCENTRATED HCL FROM ROAD TANKERS.

We are offering vertical submersible pump. Salient features . Multi stage centrifugal pump with radial & mixflow impeller . It operate submerged beneath the surface of water . Prime mover motors are wet type, water lubricated . Easy installation and easy servicing . Also works on low voltage . Energy efficient design . Good quality components and parts require, less maintenance . 50 feet head per stage pumps are design for hihg head application . Janta model pump design for 6? motor & 7?8? pump for high discharge application at low cost