Vertical Submersible Pumps Dealers in Ahmedabad

malhar submersible pumps are vertical , multi stage, centrifugal pumps with motor at the bottom & pump at the top. The water enters at the bottom of the pump and flows upwards through many stages. the stainless steel bronze impellers rotate inside the diffusers with inherent guide vanes. The diffusers direct water leaving each impeller towards suction opening of the next impeller, such a flow through each stage of impeller and diffuser combination adds pressure at each stage and finally water under high pressure is discharged through outlet at the top.   construction details motors are wet-type, water lubricated,water cooled rewindable squirrel cage induction asynchronous type capable of with standing wide voltage fluctuations. Specially designed tilting pad thrust bearings can with stand axial thrust loads with negligible wear. The stator is wound with water proof synthetic film insulated winding wires. Spring loaded seal rings , grommets & sand guard prevent ingress of water in to the motor. An elastic diaphragam compensates for variations in pressure of cooling water as it gets heated during functioning. the supply cables are protected by special stainless steel guards along the full length of the pump. malhar submersible pumps are manufactured as per is 8034 : 1989 with strict quality control for years of efficiency and reliable peration. Special design of the winding ensures efficient operation even high head and low voltages. Malhar pumps are available in both radial & mixed flow. The pump is multistage of superior hydraulic design for maximum performance and operating efficiency. The bowls are made of close grained cast iron for greater abrasion resistance. The impellers are of high quality graded bronze , dynamically balanced for best results. The stainless steel shaft is ground to close tolerances and guided by water lubricated gun metal bearings, provided in each bowl of impeller casing. Hydrostatic tests are conducted on each pump to ensure maximum discharge at selected heads variable voltage conditions. A stainless steel coupling is provided to couple the motor and pump.   application agricultural, industries, high rise buildings, fire fighting, sea water application. Etc. the material of construction for the complete range of submersible pumps is as follows:-

Our ultimate quality Vertical Open Well Set products are fabricated with qualitative materials & elements. These are based on the cutting edge technology of the industry. These can be easily installed at the bottom of well without necessitating suction pipes. These have dynamically balanced rotors as well as impellers to zero vibration &noiselesslyworking pumps are designed by our experts to ensure optimal functioning in a very safe and reliable way with preferable aspects. Thecompact design makes it ideal for lowestlevel ofwater.

• Motor Phase: Three Phase
• Power Source: AC Powered
• Power: 0.5 HP- 7.5 HP
• Sub Section: 65mm, also available in 80mm

• Head: 15 to 50 m
• Voltage: 200 - 440 Volts
• Application: Pumping water from wells, sumps and water-tanks,Water for gardening, sprinklers and conventional irrigation
• Brand: Kirloskar
• Model Name/Number: JVSA-0502 PUMPSET 80MM
• Power Rating: 5 HP
• Capacity: 120 to 960 LPS
• Features: Designed for underwater applications. No need of priming and foot valve,Easy installation - foundation and insulation platform or pump house not required,Can withstand wide voltage fluctuations from 200 - 440 V,CED coated cast iron components for rust fre

We are offering vertical submersible pump. Salient features . Multi stage centrifugal pump with radial & mixflow impeller . It operate submerged beneath the surface of water . Prime mover motors are wet type, water lubricated . Easy installation and easy servicing . Also works on low voltage . Energy efficient design . Good quality components and parts require, less maintenance . 50 feet head per stage pumps are design for hihg head application . Janta model pump design for 6? motor & 7?8? pump for high discharge application at low cost

• Automatic Grade: Semi Automatic
• Warranty: 1 Year
• Application: Industrial
• Advantage: Easy to Operate
• Performance: Optimum
• Speciality: Rust resistance

Salient Features Submerged in water permantatly so no need of separate cabin Compact design suitable for minimum water level It also works on low voltage Noiseless and vibration free operation Installation without foot valve Easy installation and servicing

• HP: 4.0 To 20.0
• Size: 65mm & 100mm
• Head In Meter: 20.0 To 176.0
• Discharge In LPM: 350 To 1500
• RPM: 2850
• Volt: 415 Volt / 300 Volt
• Hz: 50
• Type of Duty: S1

Salient Features Wet type, water Filled rewindable motors Withstand wide voltage fluctuations Long life due to sturdy construction   Application Building / Bungalow water supply Flow / Drip / Sprinkler Irrigation Garden, Fountains & Shrimp Farm Cooling towers Garden, Fountains & Shrimp Farm

• Motor Horse Power: 1 to 3 HP, 5 to 20 HP
• Motor Phase: Three Phase
• Power Source: Electric
• Application: Industrial, Agriculture, Domestic
• Warranty: 12 months
• Installation/After Sales Service: No
• Motor Speed (RPM): 2900(RPM)

Product features  Easy to install  Enhanced efficiency with all the advantages of mounting the prime mover and pump integrally on the same shaft.  The multistage vertical open well submersible monoblock can be placed at the bottom of the well. This arrangement does not require suction pipe.  Dynamically balanced rotors and impellers ensure vibration free performance and enhanced life.  Water can also be drawn from a borewell which is bored at the bottom of the openwell by inserting a suction pipe into the borewell and providing a cooling tank arrangement to keep the monoblock submerged in water.   Applications Irrigation Drinking water supply Industrial water supply Cooling water circulating systems   Technical Data

• Model: UG OV
• Head in mm: 30mm

Agriculture, Openwell application for fluctuating water pump industries, Resewir, Garden, Hospitals, Fountain, Landscaping.

• Type: Vertical Submersible Pumps
• Shape: Vertical
• Application: Ground Water Supply
• Color: Blue, Green, Grey, Red, Yellow
• Voltage: 110V, 220V, 380V
• Fuel: Electric
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw
• Pressure: 0-10bar, 10-20bar, 20-30bar, 30-40bar
• Warranty: 1 Year, 2 Years

Varuna Vertical Open Well Submersible Pumps are manufactured as per IS: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency. The sturdy construction and design of the motor also gives shock-absorbing capacity during installation.   Vertical Openwell Submersible Pump Salient Features   Cast iron Stator body gives a robust design. Accurately machined on CNC machine for reliable performance and longer life. Stator and rotor of the monoset are vacuumed, impregnated with synthetic varnish and epoxy coated for corrosion resistance. Highly efficient hydraulic design. Provided with double eye-bolt for easy installation. Products are available with NRV, which reduces the thrust load of backpressure.   Application   Irrigation from open wells, specially where there is a wide fluctuation in water levels Civil and industries Community water supply from open wells Canals and rivers Agriculture

No Foundation required Always operates under water, hence: No suction problem No possibility of burn-out of motor. No water level guard required For longer life Cast iron construction Dynamically balanced rotor and impeller Water lubricated bearings Motor designed to withstand wider voltage fluctuations For safety earthing terminal is provided on motor body.

We are offering varuna vertical open well submersible pumps are manufactured as per is: 14220. The high-grade cast iron material with unique hydraulic design gives better performance and efficiency.

• Bore Well Size: O.W
• Out let Size: 2″

Vertical submersible pumps Specially designed efficient pump set to operate for longer duration and trouble free operations in working conditions. “PARESH” submersible pumps with water filled motors are cost effective, durable and energy efficient.

• Type: Vertical Sumbersible Pump
• Head: Upto 200 mtr
• Discharge: Upto 350 lpm
• Range: 0.5 HP To 5 HP
• Pipe Size: 25, 32, 40, 50 mm
• Rpm: 2800 rpm
• Power Supply: Single & Three Phase

Vertical Openwell Submersible Pump, multistage openwell submersible pump

Submersible Vertical Pumps, Cast Iron Crucibles, Ferrous Casting

Vertical Openwell Submersible Pumps, Regenerative Monoblock Pumps

Vertical Submersible Pump, V9 Three Phase Openwell Pumps