Vertical Sump Pump Dealers in Ahmedabad

• Brand Name: Vertical Inline Sump Pump

We offer vertical inline sump pump. Creating new benchmarks in the industry as a manufacturer and supplier, we are engaged in offering vertical inline sump pump. These innovative ranges of pumps are widely demanded in various industries for meeting diverse applications. To maintain industry defined quality standards, the entire range is manufactured using quality proven raw material and cutting-edge technology. Also, the entire range is examined properly by our quality controllers upon distinct parameters of quality. features: rust resistance accurate dimension sturdiness

• Capaicty: Up to 300 M3/hr
• Head: Up to 35 mtr
• Discharge Size: Dn 25 to 125 mm
• Temperature: Up to 50c
• Speed: Up to 2900 rpm

vertical centrifugal process pump can be used in any installation or specially where the saving of space is important factor and most important where liquid is difficult to lift because of nature like temp , corrosiveness etc these pump are designed for use where the liquid handled to be is of highly corrosive nature or where non – adherence of product or zero metallic contamination is must these pumps are equally ideal for continuous or intermittent service for handling corrosive as well as ultra pure chemicals without fear of corrosion or contamination. high temperature services : maximum working temperature is 110 c / 200 c. length : pumps lengths available from 1’ to 12’ with flow rate up to 50m3/h or 120 meter head. Higher capacities and head available on request and even multistage pump can be also made . models : available in conventional or tailor-made configuration. Several models such as suction extension with float switch, duplex pumping station with float switch (auto on/off device) also available.   special features • bearing free design for handling abrasives in solutions. • motors are flange mounted single or three phase tefc from 1 hp to 100 hp . • epoxy / polyurethane paints are used on metallic bearing housing. • radial vanes on backside of impeller increase flow or fluids through the sleeve bearing preventing overflow at top of column. • lubrication of bearings by product itself or by fresh water. • all models operate at 1450 rpm / 2900 rpm (variable speed motor available ) • specially designed vapor seal provided to protect bearing from corrosive fumes • dynamically balanced impeller.   application fields these pumps are in extensive use in the fields of • pollution control. • filtration . • transferring corrosive chemicals . • slurries . • bio gas plants. • sewage. • waste water treatment plant. • phosphoric acid plant. h,po,h2sifs,h2so4,hf and . their mixtures. • gas washing plant . • scrubbed liquids containing , f,cl,so2,ammonia • water treatment plant . • any types of acidic water lifting . • m.s vertical pump are used for transfer of sulphuric acid 98 %. Olum,cloto,neptha   advantages of vertical submerged pump • no mechanical seal or stuffing box required • construction withstand corrosion & erosion • no foot valve required to lift from negative suction • no leakages problem just like gland or mechanical seal • normal maintenance • easy alignment    

• Size: 25 mm to 125 mm

We manufactured vertical pumps for the applications with low net positive suction head, cryogenic temperatures where vertical lift is required and in also in sump and cooling water services. Our vertical pumps is specially designed for service in water, chemicals, sewage and slurries. Vertical pumps are cover a wide range of hydraulic condition to meet virtually every pumping service in the industry and optimum efficiency.

• Pump Size: 25 mm. to 350 mm
• Discharge: 2 to 1400 m3/hr.
• Permissible Solid: 5 to 150 mm.

The easier automatic operation of the pump is possible with the use of the float switch or automatic level control unit. The pump is available in oil, grease and water lubrication system.

Applications: The “JEE” sump pump is suitable for handling thin, clean or slightly contaminated liquids, such as water, cooling water, effluent, cleaning products, chemicals and hydrocarbons.Dewatering, mud, marine, effluent, hotel, loading, & transfer of oils, spirits, swimming pools, gas oils, engine cooling. Sulphuric Acid application, acid transfer, aquariums, chemical processing, Chloralkali, General Processing Industry, Light slurries, organic Chemicals, Polymers, Petrochemical Processing, Slurries, Solvents, Waste Processing.Vessels, industrial-pumping petroleum products, chemical.

• Pressure: Up to 6 kg/cm2
• Capacity: Up to 325 m³/hr
• Head: Up to 60 Mtr.
• Discharge Size: 25 mm to 125 mm.
• Temperature: Up to 60°C
• Speed: Up to 3500 rpm
• M.O.C.: C.I,C.S.,SS-304/304L, SS316/316, Bronze, Alloy-20, CD4MCU Hast alloy B&C, etc.

• Pressure: Up to 3.5 kg/cm2
• Capacity: Up to 300 m3/hr
• Head: Up to 35 mtr
• Discharge Size: Dn 25 to 125 mm
• Temperature: Up to 50oC
• Speed: Up to 2900 rpm
• Pump Length: Up to 3 mtr

Applications : Sulphuric Acid, Nitric Acid, HCL Transfer. Solvents, Diesel & Petrol Transfer. Light Slurries, Organic Chemical Processing. Water, Cooling Water, Effluent, Cleaning Product & Hydrocarbons. Zink & Copper Plant. Salt, Pharmaceutical, General Industrial Services etc.   Features : Designed to meet specific lengths & application requirements. Base plate designed to meet exiting support arrangements. Standardized & modular design. Standard shaft sealing by oil seal, mechanical seal or stuffing box packing. Connects the pump casing with the base plate. Column pipe protects the shaft. Supports the eventual intermediate bush bearings. Suction strainers, simple mounting & self priming. Optimized hydraulic performance. Compact design using less floor space. Close / Semi open impeller. Easy maintenance, replaceable parts. Heavy duty shaft, sleeve & bearings.   Materials : SS-316, SS-316 L, SS-304, SS-304L Duplex Stainless Steel Super Duplex Stainless Steel Cast Bronze, Cast Steel, Cast Iron Hastalloy - B & C, Alloy-20 etc.

Designed to meet specific lengths & application requirements.   Base plate designed to meet exiting support arrangements.   Standardized & modular design.   Standard shaft sealing by oil seal, mechanical seal or stuffing box packing.   Connects the pump casing with the base plate.   Column pipe protects the shaft.   Supports the eventual intermediate bush bearings.   Suction strainers, simple mounting & self priming.   Optimized hydraulic performance.   Compact design using less floor space.   Close / Semi open impeller.   Easy maintenance, replaceable parts.   Heavy duty shaft, sleeve & bearings.

• Voltage: 415 V
• Power: 15 KW Max.
• Country of Origin: Made in India
• Model Name/Number: FVFLP
• Brand: Flow Line
• Head: 50 Mtr Max.
• Max Flow Rate: 70 M3/Hour Max.
• Motor Horsepower: As per Customer Parameter
• No Of Phase: Three Phase
• IP Rating: IP44
• Usage/Application: Industrial
• No Of Poles: 4

• Material of Construction: CS, SS, Alloy etc

The Centrifugal Vertical SumP Pumps we manufacture are vertically designed centrifugal single stage pump that has downward axial suction radial for direct discharge of flanged to the discharge pipe. The shaft is affirmed from its upper end with grease lubricated ball bearing lateral supporting of shaft which is obtained by radial bush bearing manufactured using anti-friction material. These pumps are used for lifting from in-tank / outside constructions along rivers, lakes, water sheds and others.   Applications: Circulation of industries water, acidic and acidic water in metal and sewage treatment plants, chemical waste water handling

Vertical Centrifugal SUMP Pump "VSE" Series

Vertical PP Sump Pumps, Award Trophies, Clock Momento, Bar Accessories