Vial Washing Machine Dealers in Gidc Vatwa, Ahmedabad

The Automatic Rotary Vial Washing Machine is specially designed to wash Vial with minimum contact of machine parts with Vials. Machine with specially designed Inverter system changes the direction to reverse / invert the vial and is feed to the infeed main star wheel, till the washing operation completed and again after washing release the vial on out feed Star wheel system in vertical position ensures positive wash of vials. Machine, is suitable for 2ml to 50ml Vials with the help of change parts, In special design it can be used for 100ml Vial Size also. Vial feeds through Turn Table to infeed Star Wheel and specially designed inverter wheel, that invert the vial and move it further on rotary moving system for Washing process. Machine suitable for application in Pharmaceutical Industries, The Vials traveling in neck down position in continuous motion above and along Washing Needles spraying by continuous jet for different washing cycles with the Needle bar ensures maximum time for washing. Machine with Standard Six or ten Different Washing Stations each of 6/10 Needle for optimum Washing and the sequence can be change as per customers requirement. Machine also having external wash for optimum washing of Vials. SPECIAL FEATURES:   All contact parts made of SS 316 material Machine construction in SS 304 Material Suitable for 2ml to 50ml and in special design up to 100ml size Washing sequence can be made as per customer requirements. Pumps with tank (60 liters each) 2 nos. Each washing zone with independent circuit to avoid contamination Automatic Infeed and Exit of Vials

We are offering automatic external filled vial washing machine. Complete cgmp construction & design can handle vial sizes from 5 ml (ø 25mm) to 100 ml (ø 54mm) with only change part of vial separators for proper positive feeding with required intervals 'no vial no washing' & 'no vial no air' system eliminates wastage of water & air. Machine is equipped with plc system. Has polycarbonate guards on machine. Machine stops if water in storage tanks's level goes below minimum & there is no inflow triggering alarms. Machine stops if the compressed air pressure drops below the set pressure and triggers alarms. Machine stops if any toppled vial inserts the track of the machine

Automatic linear vial washing machine, model: hvw-80/150&250  gmp suitable for washing of vials (2ml to 30ml) (dia. 14mm to 35mm) all contact parts made out from ss 316 entire frame covers & non contact parts made out from ss 304 needles enter in to the container during washing cycle to meet cgmp requirement low water consumption quick change over of parts for other size of containers complete flexibility with user for washing cycle machine provides 4 water washes, 3 air washes and 1 silicon (optional)   operation containers feed from the decartoning station (optional) are received on a unscrambler through visual inspection unit (optional). An infeed worm inverts container as neck down position and feeds them through specially design indexing device. The devicecarry the container forward and stops. nozzles carrier enters into the container and activates the jet of water/air.  the air/water flow is deactivated after  the washing cycle is over. device get indexing for next wash. a separate pumping station (optional) gives the right quantum of water at the desired pressure. in the absence of separate pumping station we can provide the recirculation & siliconising system on request. washed container are again inverted to neck upward position to collect in trays/directly feed to tunnel.

• Type: Vial Washing Machine
• Certification: ISO 9001:2008
• Application: Vial Washing
• Weight: 100-500kg
• Feature: Good Capacity
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Electric
• Warranty: 1year
• Brand Name: LODHA
• After-Sales Service Provided: Engineers are available for service

• Type: Drying Machine
• Brand Name: Adinath
• Supply Ability: 5 Unit/Units per Month
• Packaging Details: Product & Transport Worthy Wooden Packing
• Model Number: AVRW-240
• Port: Mumbai
• Place of Origin: Gujarat, India

Ampoule Vial Washing Machine is used for the filling & sealing of glass ampoules. Our Machines is extensively uses in pharmaceutical, cosmetic & chemical industry. We manufacture Vial Washing Machine as per our standard model as well as custom made equipments. Our Vial Washing Machine is manufactured using high grade stainless steel, known for its silent operation and minor maintenance. Furthermore, we supply customization as per the specific necessity of the clients in order to meet their needs. We are also counted as the most excellent Exporter of Ampoule & Vial Multi Jet Washing Machine in Ahmedabad. We have earned the tag of most reliable Automatic Vial Washing Machine Manufacturer and Supplier in India. Machine with specially designed Gripper system holds the ampoule from Neck and invert the ampoule till the washing operation completed and again after washing let loose the ampoule on out feed worm system in vertical position ensures positive wash of ampoules. Our Ampoule Vial Washing Machines is suitable to wash 1ml to 20 ml Ampoules & 2ml to 250ml with the help of change parts, Ampoule feeds through Feed worm to infeed Star Wheel and specially designed Gripper hold the Ampoule from neck and invert the ampoule and move it further on rotary moving system for washing process.

• Vial Dia: 15mm to 56mm
• Model: DAVW – 240
• Output: 30 to 40 Cycles/Hour (Each cycle’s time will be of 58 seconds)
• Ampoule Dia: 10mm to 21.5mm
• Ampoule Height: 60mm to 140mm
• Vial Height: 56mm to 110mm
• Overall Dimension: 1100 mm L X 1050 mm W X 1200 mm H
• Power Specification: 1.0 HP, 3 PHASE, 440 VOLTS, 50 Hz, 4 Wire System
• Change Part: – Multi-Jet Needles Plate
•  : – Comby Trays
• Utility: DM Water : 8 Liter/cycle
•  : WFI Water : 8 Liter/cycle (Depend Up-On Cycle Time)
•  : Air
• : 20 CFM @ 5 Bar: Internal /External Washes
• Washing Media: 1st Wash
• D. Water: 2nd Wash
• Air: 3rd Wash
• DM Water: 4th Wash
• Air: 5th Wash
• WFI Water: 6th Wash

  EXTERNAL VIAL WASHING & DRYING MACHINE The External Vial Washing & Drying Machine is designed for thorough removal of product spillage and contamination on the outer surface of the Vial. Application: After filling anti-cancer, antibiotics and other toxical drugs or controlled substances,sugar containing solution and oily liquids. Advantages: Product spillage and contamination on the outer surfaces of the Vials are washed off thoroughlyAbsolute dry Vial with specific adjustment of the water nozzles and air nozzles guarantee high drying resultsChange parts required for change over of Vial dia.Easy labeling as outer surface of Vial is neat-clean and dried.Operating Panel for comfortable operation.Provision of Air Exhaust through the CabinetOut put tray collection or online transfer. Operation mode: The Vials are fed in-line through Infeed Conveyor. Vial passes through the washing zone for washing with plain clean water Nozzles and subsequently dried by Air nozzles. A series of adjustable knife type nozzles assures gentle flow on the Vial. The washed water is drained off.

• Gross Weight: 1250 Kgs. (Approx)
• Vial Sizes: 2 ml. to 100 ml.

Direction Left to Right Left to Right Production Rate Up to 120 VialsMin. Up to 240 VialsMin. Electrical Supply 5.0 HP 5.0 HP Power Requirement 415 Volts, 3 Phase (4 Wire System) 50 Hz. 415 Volts, 3 Phase (4 Wire System) 50 Hz. Height of Conveyor Adjustable from 850 to 900 MM Adjustable from 850 to 900 MM Dimensions 2290 MM (L) x 1175 MM (W) x 1575 MM (H) 2290 MM (L) x 1580 MM (W) x 1975 MM (H) Net Weight 800 Kgs. (Approx) 1200 Kgs. (Approx)

N.K Industries is pioneer in manufacturing range of Tunnel type Linear Vial Washing Machine. Various models are available to cater the requirement of Low production to Moderate and higher production as per the modern inject able plant requirement.

• Power consumption: 3 to 5 HP as per model
• Air consumption: 10-30 CFM depend upon the Machine Model & Vial sizes
• Electrical connection: 440 V, 3 Phase, 50 Hz

Machine manufactured as per cGMP standards. Machine fitted with one set of change parts suitable for 5ml to 30ml vials. Various models available from 60 VPM to 400 VPM. (Please have a look at technical specification column) Machine is suitable for 2ml to 100ml Vial Sizes with the help of minimal change parts. Water recycling arrangement is possible as per requirement. Basic Frame of the Machine totally fabricated from SS-304 materials. All parts coming in contact with washing zone are made from SS 316L materials Machine equipped with safety devices to ensure smooth and silent operation with HIGH rated output. Machine totally rigid and withstands continuous operation for long working hours without any trouble. Washing chamber having various spray zones. Spray duration is electrically controlled by magnetic valve. HIGH pressure spray nozzles entire into the vials during washing time to insure perfect wash of vials. The machine will be provided with SS-316L pumps and SS-316L tanks All contactor and relay from Telemechanic. Main Drive: Gear Motor Make-MGM Varvel Conveyor Drive: Gear Motor Make-MGM Varvel Solenoid Valve from ROTEX Make. Conveyor Belt made from SS 304 Material. Wirewooven Type. All pipe fittings made from SS 316L Materials. The emergency stop button is provided with both ends (In feed & Out feed Side).

• Suitable for :: 2ml to 100ml Vials with the help of change parts
• Type of Washing ::: Rotary Continues Motion Washing
• Vial Diameter :: 14 mm to 52 mm Maximum
• Vial Height :: 32 mm to 105 mm Maximum
• Air Consumption :: 20 cfm
• Water Consumption :: 250 to 500 Litre per hour depending on Vial Size
• Washing Zone:: Six zone can be set as per required sequence
• Water Tank & Pump :: 2nos. Each with 25 Ltrs. Capacity & Centrifugal pump
• Electrical :: 415 VAC 3 Phase 50 Hz and 220 VAC Single Phase Power Supply (50/60 Hz)
• Power :: 4 H.P.
• Speed :: Max. 120 Vials per minute depending on Vial Size
• Conveyor Height :: 875-950 mm
• Overall Dimensions :: 2450 mm (L) x 2000 mm (W) x 1210 mm (H)

The Automatic Linear Tunnel type Vial Washing Machines Model VIALWASH-240 is suitable for Round Vials sizes of appx. 5 ml to 30 ml pack size with maximum speed of 240 Vials per minute, Specially designed machine also available for 2 ml Vial Size. Machine construction is in Stainless Steel finish including frame structure. All parts coming in contact with Washing Zone and Jets are made from SS-316 Materials. Intermittent handling of Vials ensures the maximum time for washing and also saves the Water through No Container - No Water system. Machine also offers various customized options for washing sequence as per customers requirements. Washing process takes place with Five different Washing Zones each with 10 nozzles for optimum washing. Machine also equipped with external washing of Bottles.

We are manufacturer of all kinds of Vial Holding Assembly for Rotary Vial Washing Machine. all kinds of inverter Unit for Ampoule Vial

• Features: Geneva Mechanism, Four inner (Included one air wash) & one outer., Sequence of washes to customer's choice, Easy operation, Easy loading and unloading
• Electrical supply: Three Phase + Neutral + Earthing
• Electrical load: 2 KW + 3KW for heater
• Air Pressure:  6 bar pressure 5 CFM

• MATE FINISH: S.S MATE FINISH

Positive & pressurised jets through washing needle for pressure cleaning at minimum usages of washing media. sound design concept of pressure tanks for reverses & continuous supply of washes medias both internal & external washing ensuring absolutely & continuous ampoule & vial after sequential washing. acrylic top cover for clear view of washing events taking place in the machine. on-line poly carbonates housing with p.p. Replaceable filter cartridge of 10 microns for water & 5 microns for air for best possible washing. All contact parts of washing media & compressed are of s.s 316 or hdpe of poly carbonate or p.p. in the event of acrylic cover lifted during cycle operation, the machine will automatically stop and re-start from the point when cover is pushed down.

We are offering automatic external vial washing & drying machine. Model no. nkew - 100 nkew - 200 direction left to right left to right production rate up to 100 vialsmin. (for 5 ml vial) up to 200 vialsmin. (for 5 ml vial) electrical supply 5.0 hp 5.0 hp power requirement 415 volts, 3 phase (4 wire system), 50 hz 415 volts, 3 phase (4 wire system), 50 hz height of conveyor 900 mm (approx) 900 mm (approx.) dimensions 3400 mm (l) x 915 mm (w) x 1400 mm (h) 3470 mm (l) x 980 mm (w) x 1400 mm (h)