Vibrating Machine Dealers in Vastral, Ahmedabad

• Brand Name: BE
• Weight Handling of Mould: 0.50 to 25 MT
• Meter: 01 to 04 sq.
• Deck Loading Capacity kg: 1Ton to 25 Ton

As Per The Variegated Requirements Of Our Clients, We Are Offering A Broad Collection Of Vibro Machine. The Offered Machine Is Precisely Engineered Using Basic Components And Advanced Techniques Under The Surveillance Of Trained Professionals As Per The Set Industry Norms. Our Offered Machine Is Widely Used For Mass Finishing Work Of Surface. Clients Can Avail This Machine From Us At Affordable Rate. Features: High Efficiency Sturdy Construction Unmatched Quality

• Maximum Operating Weight: Up to 9300 Kg
• Static Linear Load: 26.8 front / 26.88 Rear
• Working Speed: Up to 9.5 km per hour
• Fuel Tank Capacity: Up to 155 Liters
• Hydraulic Tank Capacity: Up to 80 Liters
• Water Tank Capacity: Up to 700 Liters
• Gradeability with Vibration: Up to 30%
• Gradeability Without Vibration: Up to 45%
• Steering Angle: +- 30 Deg
• Oscillation Angle: +- 10 Deg
• Operating Weight: Up to 9000 kg
• Weight on Front Drum: Up to 4500 kg
• Weight on Rear Drum: Up to 4500 kg
• Static Linear Load Front: Up to 26.8 kg per cm

• Automatic Grade: Semi-automatic
• Frequency: 50 Hz
• Machine Capacity: 25 ltr to 300 ltr
• Phase: Three
• Voltage (V): 240 to 440
• Power (HP): Up to 5 HP

Vibratory Trough Finishing Machine are ideal for processing larger and particularly longer items which cannot be process in a Vibratory bowl Type Finishing machine. Trough Vibrators has a U shape processing bowl which has been lined with polyurethane lining. Trough Vibrator Machine comes with heavy duty vibratory motor which is mounted under the tub, the motor has been designed for a continues and evenly distributed vibration motion throughout the trough Machine. For special application where part to part impingement is to be totally avoided, we can provide compartments in rectangular tub.  

• Voltage: 440V
• Country of Origin: Made in India
• Machine Type: Automatic
• Phase: 3
• Power Consumption: 0.5-3 HP
• Frequency: 50 Hz- 60HZ
• Brand: Delite
• Material: MS
• Shape: Round

• Certification: CE Certified, ISO 9001:2008
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Color: Blue, Red, Green, Silver, Sky Blue, Black
• Voltage: 110V, 220V, 380V, 440V
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Screen sizes are available: 1500 x 600mm, 1800mm x 800mm, 2500mm x 800mm

Vibrating Screen Machine is used for Vibrating Screen Machine For Chemicals Vibrating Screen Machine For Pharmaceuticals Vibrating Screen Machine For Aluminium Fluoride Vibrating Screen Machine For Spices Vibrating Screen Machine For Atta Vibrating Screen Machine For Suji Vibrating Screen Machine For Haldi powder Vibrating Screen Machine For Mirch Powder Vibrating Screen Machine For Mineral Garnet Vibrating Screen Machine For Zircon Vibrating Screen Machine For Medicines Vibrating Screen Machine For Bulk Drug Vibrating Screen Machine For Plastic Vibrating Screen Machine For Rotomoulding Machine Vibrating Screen Machine For Refractories Vibrating Screen Machine For Wood Chips Vibrating Screen Machine For Ceramic Pulp Vibrating Screen Machine For Paper Mill Vibrating Screen MachineFor Packaging Line

• Condition: New
• Warranty: 1year
• Material: Stainless Steel
• Use: Industrial
• Capacity ( ton per day): 0 to 4
• Power Rating: 1-5 HP

Rely on us for timely delivery as we are assisted with up-to-date transit facilities and logistics services. We are Ahmedabad(India) based organization, affianced in making available the finest lot of products in the market.

Multi-Deek Vibrating Screens: Designed for use in the Sizing of Minerals, Ceramics, Refractories and other powders. The principle on which the Jaykrishna Milti-From grader operates is equally adaptable for the handling of many ceramic products. The Unit is more than "Just a Screen" It is a precision tool for producing accurate grades, not merely rough groupings of sizes. It is economical of power and space; screen life is long; upkeep low. Flexible in its adaptability to widely different materials and conditions, it is unyielding in the uniformity of grades produced. Available in several models,and may be completely enclosed if desired for dust-proof operation.   Single/Double-Deek Vibrating Screens       Double Deek Vibrating Screening Machines are designed for screening of powders. These machines are simple and robust in construction. Available in screen size of 1500mm X 600mm, 1800mm X 800mm, 2500mm X 800mm. Special sizes as per customer specification are also manufactured. The Vibrating Screens are also available with Magnetic system to remove fine iron. Contamination from products like chemicals, Pharmaceutical and Foods etc.  

We design & engineer International Standard Eccentric Vibrating Screen. The body is fabricated from mild steel sheets, having different desk & every desk has one different way. Specifications : The body is fitted with four legs with ball bearing. The legs are titled with M.S. Channel structure. It has one C.I. Eccentric Wheel with main shaft fitted with eccentric wheel, balancing pulleys & pedestals with ball bearings. The driving is provided with suitable electric motor & vee belt with vee pulleys. Vibrating Feeders : Series motor vibrating feeder is feeding apparatus which have advanced economic and technical norms. It is widely used in mining, metallegury, coal, construction material, chemical industry, electric power, etc. and feed the massive material, granule materials, powder materials from the hopper or bin evenly and quantification into the equipment which receive the material. Features : Reliable operation Long using life Simple structure Reliable running Easy maintenance

Concrete moulds are easily cast by using a tamping bar or a vibrating table. However air trapped in cement mortar paste can not be thus removed while casting cement mortar moulds. Easy method is to impart greater vibrating of lesser amplitude to the mould while casting This is achieved in a vibrating machine. Vibrating machine is used for the preparing of mortar cubes for the determination of compression strength of ordinary and rapid hardened Portland cement, low heat Portland cement, Portland blast furnace cement and high alumina cements. A specially designed Vibration Machine is used for vibrating the mix in moulds according to strictly controlled programmer at a frequency of 12,000 ± 400 cycles per minute. The Vibrator is mounted over coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The center of gravity of the vibrator, including the cube and mould, is either at the center of the eccentric shaft or within 25 mm below it. The simple design of the machine facilitates easy assembly and dismantling of the cube moulds. The machine is suitable for operation on 230 V, 50 Hz, and single-phase, AC supply. Each machine is supplied with one cube mould.

• Certification: CE Certified
• Weight: 100kg-200kg
• Voltage: 110V
• Automatic Grade: Automatic
• Power: 1kw
• Driven Type: Electric
• Warranty: 1year

Sieve Shaker We offer Sieve Shaker. This Shaker reproduces both circular and tapping motion, Produces Circular and tapping motion with a uniform mechanical action which ensures accurate and dependable test results. This shaker is heavy in construction and no special foundation is required. The running parts operate in oil. electric motor runs the machine, the machine can accommodate six test sieves + set of Lid-pan but is supplied without sieves.   K.J.E. Make Sieve Shaker Machine: The shaker is driven by a 1/4 h.p. motor through a reduction gear immersed in oil. The sieve table dies not rotate but is inclined from the vertical axis and the direction of inclination changes progressively in clockwise direction. If the stop-pin below the table is removed, the shaker can have a rotary motion. In addition to this gyratory motion of the table, there is an upward downward movement ensuring that each square cm of the sieve is utilized. A pair of rods and a holder are supplied. The holder can be fixed on the top of the upper most sieve, and thus the sieve set is firmly held. Suitable for operation form 230 volts, 50 cycles phase, A.C. supply. Nett weight approx. 77 kg.

• Method: Hydraulic Pressure
• Automatic Grade: Automatic
• Brick Type: Solid
• Capacity (bricks per hour): 1000-1500
• Tolerance: 1 mm

Specifications: The main body from Heavy Plates &; Pipes guide rod will be chromium plated 3 Stroke in a minute 6 Pavers in a Stroke 8 bricks in a stroke Pan Mixer Details: Pan Ø: 1500 mm Side Wall Height: 500 mm Bottom Plate: 12 mm M.S Side Wall Plate: 6 mm M.S Motor: 7.5 HP, 1440 rpm 3 phase Power (Load): Hydraulic: 10 HP Taper Conveyor: 2 HP Down Conveyor: 1 HP Vibrator: 2 HP Pan Mixer: 7.5 HP X 2 NOS Total Power: 30 HP Hydraulic Cylinder: Ramming: 1 no Box: 2 nos Feeder: 1 no Wooden Pallet Conveyor: 1 no Conveyor Belt: Conveyor Belt Thickness: 8 mm Length: 22 foot P.L.C Control: Well designed PLC control system Auto Pallet Function: For hydraulic Tank Capacity for Hydraulic Oil: 400 liters Single Layer Feeder box Electrical PLC control panel Bricks Removal: Through 10 ft conveyor Total Weight: 3500 kg Operating Pressure: 220 bar-100 ton Mixing Rough Material: From pan mixer to conveyor through conveyor to storage box, then storage box to feeder and to auto ram and box

• Power: 1 HP to 10hp
• Machine Capacity: 600 Mm length to 2000mm length
• Finishing: Metal finishing or hardware finishing or marble stone finishing application
• Material: Steel

We design & engineer International Standard Eccentric Vibrating Screen. The body is fabricated from mild steel sheets, having different desk & every desk has one different way.   Specifications : The body is fitted with four legs with ball bearing. The legs are titled with M.S. Channel structure. It has one C.I. Eccentric Wheel with main shaft fitted with eccentric wheel, balancing pulleys & pedestals with ball bearings. The driving is provided with suitable electric motor & vee belt with vee pulleys.   Vibrating Feeders : Series motor vibrating feeder is feeding apparatus which have advanced economic and technical norms. It is widely used in mining, metallegury, coal, construction material, chemical industry, electric power, etc. and feed the massive material, granule materials, powder materials from the hopper or bin evenly and quantification into the equipment which receive the material.     Features : Reliable operation Long using life Simple structure Reliable running Easy maintenance

• Prime Mover: 2 / 3 H.P, 1/3 Phase, 2800 RPM Electric Motor.
• Accessories: Cage with Conical Springs / Revolving base frame stand & Needle Fitting Attachments.
• Suitable Needles: 2 H.P: 25 / 30 / 40 mm needle with 6 mtr. Long flexible shaft. 3 H.P: 25 / 30 / 40 / 60 mm needle with 6 mtr. Long flexible shaft.

single/double deck vibrating screening machines are designed for screening of powders. These machines are simple and robust in construction. available in screen size of 1500 x 600mm,1800mm x 800mm, 2500mm x 800mm. Special sizes as per customer specifications are also manufactured. the vibrating screens are also available with magnetic system to remove fine iron. Contamination from products like chemicals, pharmaceutical and food products etc.