Viscosity Instruments Dealers in Ahmedabad

Established as an admired figure in the industry, we are engaged in delivering Dynisco Capillary Rheometer. It is popular worldwide due to its all digital calibration and increased speed and force range. We put quality on the top of our priority list. We cater to the specific requirements of the customers. A number of quality tests are run by our quality team to ensure they match necessary industrial grades.Description : The new LCR7000 Series Capillary Rheometers offer many new features and will meet the demands of a 24-hour-a-day shop floor operation while maintaining the highest possible level of accuracy, repeatability and sensitivity. The LCR series rheometers are versatile and easy to use yet they offer the most sophisticated materials characterization, data analysis, and reporting capabilities. The LCR series can be used with a standard load cell and a barrel mounted pressure transducer. Sophisticated Software LAB KARS (“Kayeness Advanced Rheology Software”) is the most powerful and easy to use rheological Windows™-based software package available. Just a few of its easily useable features include: Bagley and Rabinowitsch Corrections plus power law, Carreau, Modified Cross and polynomial viscosity models. With this software users can merge multiple data files from shear stress, shear rate, or thermal stability tests. The resident KARS SQC module can be used to quickly identify viscosity variations in different lots of material. A program for the correlation of melt viscosity to intrinsic viscosity, for PET and Nylon, is also included. Real-Time Display in addition to all of its other powerful features LAB KARS for Windows™ provides a real time display of force or pressure versus time as a test progresses. This feature allows the operator to identify the steady state flow condition for the material. In addition, the presence of contamination, unmelted resin, or bubbles in the material may be identified from spikes in the force versus time curve.   Features and Benefits : All digital calibration Increased speed and force range Advanced electronics and software enable up to 45 shear stress or shear rate data points per test Unique algorithms for polymer melt stability Bi-directional communications enable test parameters to be downloaded from the PC Multiple barrel heating zones and adaptive PID temperature control algorithm provide precise and uniform heat up to 430oC (500oC optional for Model 7000 and 7001 only) Precision servo-drive motor and transducers enable tight control of stress and rate mode tests Tungsten carbide dies and a hardened and honed tool steel barrel ensure long years of service LAB KARS, advanced rheology software

• Country of Origin: India

• Type: Automatic
• Material: Stainless Steel
• Certification: CE Certified
• Application: Industrial, Lab, Laboratory
• Color: Grey
• Condition: New
• Capacity: 4 sample at a time
• Power: 1000-2000 W
• Automation Grade: Manual
•  Temperature: 50-100 Deg C
• Country of Origin: India
• Warranty: 1 Year

• Temperature Range: Above ambient to 150 deg C or for below ambient or subzero application
• Brand: EIE,EIE
• Color: Grey
• Condition: New
• Power Source: Electric
• Application: Laboratories
• Certification: CE Certified, ISO 9001:2008
• New,Used: NEW
• Type: Kinematic Viscosity Bath
• Weight: 50-100 Kg
• Warranty: 1year
• Country of Origin: India
• Size: FOR 2 VM / 4 VM/ 8 VM

• Applications: Flow cups made from brass having S.S. Orifice for measuring viscosity with stand.Flow Cup B4 with Stand.Flow Cup B4 with Calibration Certificate.Flow Cup B4 with Govt. Calibration Certificate.Cups B-2, B-3, B4, B-6, B-8

Introduction Used for determination of Kinematic and intrinsic viscosity of fuels, lubricants & petrochem raw materials at constant temperatures in accordance with ASTM D 445 and other equivalent methods. Available in two versions, to work at above ambient temperature and below ambient temperature.   General Descripation & Specifications Double walled, outer chamber made of G.I. - powder coated, with removable toughened Glass window panel, inner chamber made of S. S, FHP motorised stirrer for uniform temperature, Dual Display Microprocessor Based Digital Temp. Controller with PT-100 sensor. Temperature range from 5° C above ambient to 100° C., Control accuracy ± 0.1°C. Below ambient Viscosity Baths are fitted with Refrigeration system (Temperature Range : 10°C to 100°C). The Baths can accommodate 2 / 4 / 8 Viscometers with varying tank volumes.   Stainless steel bath Temperature controller (Thermostatic/Digital) Immersion electric heater Constant speed Pump cum stirrer Carriage holding up to three standard briquette moulds Electric motor with gear mechanism Stainless steel scale and pointer Control Panel   Reverse Flow Viscometer The viscometer is made of clear borosilicate glass free from visible defects. All glass tubing used in the construction of a single viscometer is of the same composition and the finished instrument is thoroughly annealed. The design and details of the viscometer are given at side. The size, approximate constant and Kinematic Viscosity is as per table.

Viscosity is the property of the fluid by which it resist flow due to internal friction. Used for determining viscosity of cut - back bitumen and road oil. Viscosity is measured by determining the time taken by 50 cc of the material to flow from a cup through a specified orifice. General Descriptions And Specifications The apparatus consist of bath with cup of 10 mm or 4 mm orifice and sleeve stirrer with ball lifting clip and ball .The bath is fitted with an immersion heater to take the water to the required temperature and a drain valve. The temperature is controlled by energy regulator or voltage varrier.(extra cost) The assembly is kept on suitable stand with leveling screws. Suitable to operate on 220 V.50 Hz, AC single phase. Optional Accessories and parts The following accessories and consumables are not part of the standard supply and are mandatory for the testing work Thermometer IP 8C/9C/10C Spare silver plated orifice cup 4mm. Measuring Cylinder 100 ml. Stop Watch Mechanical/Digital Solvent (Benzene/Toluene)for cleaning

• Brand Name: EIE
• Lead Time: within 4-6 weeks after confirmation of firm order
• Supply Ability: 100 Piece/Pieces per Year As Per Buyers Requirement
• Port: Gujarat, ahmedabad.
• Model Number: Tar Viscometer

Viscosity is the property of the fluid by which it resist flow due to internal friction. Used for determining viscosity of cut - back bitumen and road oil. Viscosity is measured by determining the time taken by 50 cc of the material to flow from a cup through a specified orifice. General Descriptions And Specifications The apparatus consist of bath with cup of 10 mm or 4 mm orifice and sleeve stirrer with ball lifting clip and ball .The bath is fitted with an immersion heater to take the water to the required temperature and a drain valve. The temperature is controlled by energy regulator or voltage varrier.(extra cost) The assembly is kept on suitable stand with leveling screws. Suitable to operate on 220 V.50 Hz, AC single phase. Optional Accessories and parts The following accessories and consumables are not part of the standard supply and are mandatory for the testing work Thermometer IP 8C/9C/10C Spare silver plated orifice cup 4mm. Measuring Cylinder 100 ml. Stop Watch Mechanical/Digital Solvent (Benzene/Toluene)for cleaning Notes The Tar Viscometer is also available for multiple test – fitted with Digital Temperature indicator cum controller and FHP electric stirrer. Supplied with Tar Cups of 10 mm and 4 mm orifice with valves.

INTRODUCTION : NOVA DIGITAL CONSTANT TEMPERATURE VISCOSITY BATH is specifically designed to cater the needs for Laboratory, R & D, Quality Control and Analytical Work.   SALIENT FEATURES: Easy to operate.            High & Reproducible Accuracy.            Clear Working space.                Uniform heating & stirring. Digital Temperature Indication & Control (Micro Control) High sensitive temperature sensor. Toughen Glass Window – Both side. Digital Microprocessor Auto-tune PID Control (Optional). Microprocessor Based Programmable Control. [Optional]. APPLICATION: NOVA DIGITAL CONSTANT TEMPERATURE VISCOSITY BATH are available for various use in R & D Centers, Quality Control Departments, Universities, Post-Graduate Institutes, Research Organisations, Industries, Refineries and Petroleum Testing Laboratories especially for determination of viscosity of liquids etc.                    CONSTRUCTION: Double walled construction. The working chamber is made out of selected grade thick STAINLESS STEEL Sheet. This is mounted in a Mild Steel cabinet duly powder coated. The heaters are of tubular type immersion heaters resulting in quick transfer of heat to the bath media. The circulation stirrer unit is accommodated near the heaters in a separate compartment separated by a weir arrangement hence the bath is available obstruction free for use. GLASS WINDOW ON BOTH SIDE IS PROVIDED TO SEE THROUGH THE SAMPLES.   HEATING: are incorporated and control by Digital Temperature Indicator cum Controller.   CONTROL SYSTEM: All the controls are provided on top/side for easy assessment and operation consisting of Mains switch, Mains Indicator, Digital Temperature Indicator cum Controller and Heater ON/OFF Indicator, Stirrer ON/OFF Toggle switch.   BHATH MEDIA: 5 Deg. C above ambient to 95 Deg. C water can be conveniently made use of but for temperature above 95 Deg. C. water with thin layer of paraffin or technical white oil can be used.   OPERATING VOLTAGE : 230 Volts Single Phase 50 Hz AC.

• Temp. Range: 50C above ambient to 99.90C +/- 0.50C or as per requirement
• Temp. Control: Digital Temperature Controller
• Inner Chamber: Stainless Steel
• Outer Chamber: Mild Steel Powder Coated / Stainless Steel
• Lid: S.S. Lid with Viscometer Holders
• Glass Window: TOUGHNED Glass Window at Front & Back side of the Bath.
• Illumination: Illumination Provided behind the TOUGHNED Glass
• Insulation: Glasswool Insulation
• Heater: S.S. Immersion Heater
• Circulation: CIRCULATORY Motorised Stirrer
• Capacity of Viscometer: 2, 4 and 6 (as per requirement)

• Type: Kinematic Viscosity Bath
• Application: Agricultural, Bio-chemical, Laboratories, Medical
• Weight: 50-100 Kg
• Color: Brown, Grey, Light White, White
• Condition: New, Used
• Application: Laboratory, Test Kinematic Viscosity
• Power Source: Electric
• Warranty: 1year, 2years

Rheological evaluation through controlled stress measurement offers superior viscosity profiling, thixotropic response, yield stress determination and creep analysis. The Brookfield RST Rheometer offers both controlled rate and controlled stress measurement. Available with coneplate, plateplate, or coaxial cylinder measurement geometry, the RST Rheometer offers powerful flow characterization tools including ramp, loop, and single point testing. A wide range of shear rate, shear stress, and torque provide flexible flow analysis including creep and yield measurement. The RST Rheometer is designed to accommodate the high throughput required of quality control laboratories. It also offers the sophisticated flexibility required of research environments. The RST Rheometer provides cost effective, worry free operation for a variety of laboratory applications.

The Fusion Gram is the universal Torque Rheometer for application of investigations or processing behavior in laboratories and simulations with a torque measuring range of 200 NM and speed range from 2 to 100 RPM. The Fusion Gram is the perfect basic unit for practice oriented measurements with Mixers, Single Screw. Extruders for: Raw Material and Recipe Development. Material Testing. Quality Control Parallel to Production. Optimization of Production Process. Laboratory Scale Production of Samples for Further Investigations.

Standard Tar Viscometer (AIM 531, AIM 533)   For determining the viscosity of cut back bitumen and road oil. The viscometer consists of a chrome plated copper bath, with a drain valve and a central tube to receive the test cup and to position the stirrer, and is mounted on a stand with levelling feet. Stirrer has a curved shield and is provided with an insulated handle, thermometer socket and swivel support for the valve. Supplied complete with 10 mm cup and ball valve as per the model required.AIM 531 Standard Tar Viscometer, Electrical Heating with Immersion Heating Elements and Dimmerstat for controlling the temperature. Complete with 10 mm Cup and Valve.Suitable for operation on 220V, 50 Hz, single phase, AC supply.   AIM 533 Standard Tar Viscometer, 10 mm cup and ball valve Electrical Heating similar to AIM 531, but with 4 mm Cup and Valve.   Application For determining the viscosity of cut back bitumen and road oil Industry Civil Infrastructure Asphalt / Petroleum/ Bitumen Testing Dams & Tunnels Real Estate Roads, Highways & Bridges Traffic Monitoring Education Building Technology Civil Department Geotechnical Science Colleges Traffic & Transportation Roads, Highways & Bridges

• Country of Origin: Made in India
• Brand Name: shreeji
• Color: Silver
• Material: S S
• Accuracy: 100.00%

• Material: Mild Steel
• Brand: mark instrument
• Usage/Application: Laboratory
• Number Of Cups: 2

Laboratory Equipments, Testing Equipments, Benkelman Beam Apparatus

Shale Shaker Screen

viscometers, pressure density cups, Balances

360 TOTAL STATION, Auto Karl Fischer Titrimeter 761

Constant Temperature Bath, Garmin GPS Survey Instrument

Mercuric Chloride, Silver Sulphate, TLC Plate, graduated cylinder

Ferrous DFT Meter, Chlorine Meter, Analog Tachometer, Degree Set Square

Transit Vernier Theodolite, Proving Rings, Reflectance Meter