Volumetric Liquid Filling Machine Dealers in Rakhial, Ahmedabad

• Accuracy: ± 1%
• Direction: Left to Right
• Production Rate: Up to 120 fills/ Min for Single DoseUpto 60 Fills / Min for Double Dose
• Fill Capacity: 2ML to 50ML for Single Dose (with the help of Change Parts) (for 100 ML Filling double Dosing is Required)
• Syringes Available: 2ML to 10ML10ML to 50ML
• No. of Syringes: Four
• Electrical supply: 1.5 HP
• Power Requirement: 440 Volts, 3 Phase (4 wire System) 50 Hz
• Height of Conveyor: Adjustable from 800 to 850 MM
• Dimension: 3087 MM (L) X 837 (W) X 1800 (H)
• Net Weight: 650 KGS. (Aprox.)
• Gross Weight: 900 KGS. (Approx.)

• Model: Bhagwati 40
• Output/Hour*: 700 to 2400
• Number of head / Syringe: 2 Nos.
• Fill Size***: 5 ml to 1000 ml
• Power Consumption**: 0.5 HP & 1 HP ( if maximum volume is 1000 ml in single doze)

APPLICATION & PROCESS : Semi Automatic Volumetric Liquid Bottle Filling Machine works on volumetric principle with syringe & piston & nozzle. It is used to fill liquid in bottle in pharmacy, food, dairy, agro chemicals, Beverages industries. The unit is made compact, versatile and enclosed in stainless steel elegantly matt finish body, consists of, drive unit with gear motor, eccentric drives, Syringe piston assembly, Reciprocating Nozzle with self-centering devices. Bottle is manually loaded in position for filling and unloaded after filling. SALIENT FEATURES : Semi automatic with filling range from 5 ml to 1000 ml with the help of change parts. Accuracy ± 1 % in single doze. Three different speeds depending upon capacity of bottles. Body covered with SS sheet. All contact parts SS316. A unit to fill variety of liquid and can be used for various type of containers. Minimum change over time from one size to another container or fill size.  

KEY FEATURES : ± 1 % Filling accuracy on single dose. No bottle No filling system. Rigid vibration free construction for trouble free performance. Drain tray around machine platform. Pneumatic bottle stopping arrangement. Minimum change overtime, from one size to another container or fill size. OPTIONAL FEATURES : Acrylic cabinet Automatic chain washing system for conveyor belt Nitrogen Flushing Float tank (Holding tank) with or without stirrer PLC Based control Panel

AUTOMATIC LIQUID BOTTLE FILLING AND ROPP CAP SEALING MACHINE MODEL: AHBF 4 Salient Features: • “No Bottle - No Fill" system. • All contact parts made of SS316 material with Autoclaving/Sterilization/Cleaning. • FMachine construction in SS 304 material. • Diving Nozzle for Foam free filling. • With Fill Accuracy. • Automatic In-feed and Exit of Bottles. • Minimum Change Over time. • Digital counter. • Built-in A.C. Variable Frequency Drive System. Process Operation: Bottles are feed on to in-built Infeed turn table, from where it delivered to SS conveyor belt. Conveyor belt transport bottles to filling station. Filling station has mechanical bottle stopper for exact bottle neck centering of bottles during filling operation. Nozzle goes upwards slowly from the bottom level of bottle towards neck during filling to minimize forming adjustable nozzle is reciprocating according to filling dose. The dosing block with a hexagonal bolt, this means different fill size can be set easily within minimum use of time. After liquid filling bottles are delivered to capping/labeling machine conveyor for further operations.

Semi automatic volumetric liquid filling machines are two head, table top, fully GMP model used to fill variety of liquids. This machine works on the volumetric principle and is fitted with two syringes on the sides. The volume of the machine can be easily adjusted by increasing or decreasing the eccentricity. Motor and gearbox of the liquid filling machines are covered in a SS cabinet.

we are offering automatic volumetric liquid bottle filling machine, filling accuracy on single dose. rigid vibration free construction for trouble free performance. s.s. elegantly matt finished body. elegant and easy control panel for total control on operation. minimum change over time , from one size to another container or fill size. reciprocating filling nozzle with self centring device to avoid foaming. the unit is made compact & versatile -as per gmp norms. no container no filling system-to avoid spillage. synchronised a.c. drives for conveyour & main drive. technical specification model no dalf-100 (4 head) dalf-150 (6 head) outputhour* 2500 to 6000 3500 to 9000 electric motor main machine 1 hp 440 volts 3 phase 50 (four wire) conveyor 0.5 hp 440 volts 3 phase 50 (four wire) container size ø 30 mm to ø 100 mm, maximum height 210 mm fill size 10 ml. to 500 ml. (with the help of required change part) overall dimension 2035mm (l) x 1050mm (w) x 1400mm (h) *note : depending on nature of liquid & fill size.

Volumetric Liquid Filling Machine, self adhesive machine