Domestic Washing Machine Dealers in Kathwada, Ahmedabad

• Vial Dia.: 16mm to 38mm
• Power Requirements: 1 H.P. For Main Machine 0.5 H.P. For Un-scrambler (0.5 H.P. X 3 No) = 1.5 H.P. for Pumping station
• Vial sizes: 2ml to 30ml

Harsiddh engineering Co. is a recognized brand in the supply vial washing machines. The two popular automatic linear vial washing machines are the HLVW-150 and the HLVW-80 model. The HLVW- 150 has a throughput of 60-150 vials per minute while the HLVW-80 model has capacity of 40 to 80 vials per minute depending on vial size that ranges from 2ml to 20ml. Our vial washing machine has CE certification.The loading, cleaning and exit mechanisms are automatic and this increases the cleaning throughput and ensures minimum handling and contamination. The machines have a specially designed in-feed worm wheel that inverts vials and holds them on an indexing device ready for the first wash. The washing cycle is achieved through water and air nozzles that are directed on the inverted vials for maximum cleaning. The specially designed pumps supply water to nozzles at high pressure to effect the cleaning.

• Driven Type: Mechanical
• Condition: New
• Automatic Grade: Automatic
• Power: 9-12kw, 6-9kw, 3-6kw, 12-15kw, 1-3kw
• Certification: ISO 9001:2008
• Feature: Rust Proof, Low Maintainance, Long Life, High Performance, Good Capacity, Easy To Operate
• Weight: 500-1000kg, 1500-2000kg, 1000-1500kg
• Warranty: 1year
• Vial Size: 2 ml to 30 ml Round Glass Vials
• Output Speed: 60 to 200 Vials/Minute
• Working Height: 875 ± 50MM Adjustable
• Air Consumption: 5 CFM
• Power Supply: 3 Phase + Neutral + Earthing / 415 V AC / 50Hz
• Wash Cycle: 7 Wash

Automatic External Vial Washing Machine is designed to wash the outer surface of round shaped Vials. Machine washes the outer sides of Vials and eliminates the particles that are formed on the vials, which are previously filled and sealed.   Salient Features Complete cGMP model Suitable for vial sizes from 5ml to 100ml without any change parts (No change parts required) No Vial – No Washing” system eliminates wastage of water & air Easy cleaning & maintaining Machine is equipped with PLC system. Stops supply of water & air when acrylic doors opened during operation. Indication & alarm in PLC. Normal water required for washing & no hot water required When there is no vial on conveyor, it stops the water & air supply. Infeed & outfeed Turn Tables. Imported Gear motor for main drive, unscrarnbler and scrambler Variable A.C frequency drive for main drive, unscrambler and scrambler Acrylic cabinet for machine.   Process Operation Form the in feed Turn Table the vials are fed into the External the Vial Washing Machine conveyors. The machine consists of two conveyors on which the vials are properly fed and transported from in feed Turn table for the washing operation. Two Operations are carried out on this machine. First the vials are washed by water jet and then dried by air jet. On the conveyor a set of spray nozzles are fitted on each on each conveyor for water Jet. One set of knife blocks are provided on each conveyor for air. The air sprayed through this knifes . The knifes are fitted in a inclined manner which ensures that is sprayed reaches each corner of the vial which are previously washer. After washing and drying the vials are guided to the out feed turn Table. Before reaching the out feed Turn Table a special arrangement is provided to dry the vial from the bottom side . A set of Syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of vial resulting in the drying of the vials This machine is completely operated by PLC . A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water &air and shows the indication which alarm in the PLC.

• Voltage: 230 Volt / 50 Hz / AC
• Material: Stainless Steel
• Phase: Single phase
• Suitable for: Vials, Bottles & Round Containers
• Electric Load: 0. 5 to 1.5 hp Depend Upon Size.

We are the leading exporters and supplier of this products.

• Production Rate: 200 Vials/Minute
• Model: AVEW-200
• Direction: Left to Right
• -:  
• Vial Diameter: 25mm to 60mm
• Vial Height: 38mm to 120mm
• Powder Supply: 2 H.P.
• Electrical Characteristics: 440 volts, 3 phase, 50 hertz
• Working Height: 900mm
• Overall Dimension: 3850mm (L) x 950mm (W) x 1650mm (H)
• Net Weight: 650 kgs. approx.
• Gross Weight: 950 kgs. approx.

• No. Of Syringes: 2 (each 500ml.)
• Electric Connections: 1 HP Electric motor for Main Drive
• Overall Dimensions: 520 (L) x 620 (w) x 750 (H) in mm

Semi Automatic Bottle washing, Filling & Capping Machine The unit is made compact, enclosed in stainless steel elegantly mate mirror finished body. Cam operated Syringes will draw correct volume of liquid and deliver it through tubes to nozzle. Rigid vibration free construction for trouble free performance, S.S.Covers parts for Elegant and easy reach on off switch for total control on operation.

The range of products which we manufacture and supply to the customers are inclusive of a wide range of Ampoule Washing Machines which are used for different pharmaceutical injectable uses such as sterilizing, sealing, filling and washing and these machines offer a high performance. They have been made using the best technology available in the market and they have been priced at very affordable rates in the market and they are used for cleaning the recycling water tanks. Sturdy Well designed High performance

• Automatic Grade: Automatic
• Container Type: Tunnel Type
• Container Size: 10 ml to 1000 ml
• Material: Stainless Steel
• Voltage: 220 V/380 V
• Weight: 600-1200 kg
• Filling Speed: 40-240 bottles

Automatic Linear Vial Washing Machine, pharmaceutical machinery parts

Automatic External Vial Washing Machine, Rotocone Vacuum Filter Dryer

automatic vial washing machine, Vial Washing Machine, Ampoule Washing Machine