Domestic Washing Machine Dealers in Sp Ring Road, Ahmedabad

Automatic External Vial Washing Machine is designed to wash the outer surface of round shaped Vials. Machine washes the outer sides of Vials and eliminates the particles that are formed on the vials, which are previously filled and sealed.   Salient Features Complete cGMP model Suitable for vial sizes from 5ml to 100ml without any change parts (No change parts required) No Vial – No Washing” system eliminates wastage of water & air Easy cleaning & maintaining Machine is equipped with PLC system. Stops supply of water & air when acrylic doors opened during operation. Indication & alarm in PLC. Normal water required for washing & no hot water required When there is no vial on conveyor, it stops the water & air supply. Infeed & outfeed Turn Tables. Imported Gear motor for main drive, unscrarnbler and scrambler Variable A.C frequency drive for main drive, unscrambler and scrambler Acrylic cabinet for machine.   Process Operation Form the in feed Turn Table the vials are fed into the External the Vial Washing Machine conveyors. The machine consists of two conveyors on which the vials are properly fed and transported from in feed Turn table for the washing operation. Two Operations are carried out on this machine. First the vials are washed by water jet and then dried by air jet. On the conveyor a set of spray nozzles are fitted on each on each conveyor for water Jet. One set of knife blocks are provided on each conveyor for air. The air sprayed through this knifes . The knifes are fitted in a inclined manner which ensures that is sprayed reaches each corner of the vial which are previously washer. After washing and drying the vials are guided to the out feed turn Table. Before reaching the out feed Turn Table a special arrangement is provided to dry the vial from the bottom side . A set of Syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of vial resulting in the drying of the vials This machine is completely operated by PLC . A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water &air and shows the indication which alarm in the PLC.

The External Vial Washing Machine is designed to wash the outer surface of round shaped Vials [5ml to 100ml Vials]. This machine washes the outer sides of Vials and eliminates the particles that are formed on the vials, which are previously filled and sealed.   Vial external washer machine is fitted with after capper machine is injectable vial external washer machine / injection vial external washer machine, oncology vial external washer machine and aseptic processing lines, speed up to 120vpm , vial surfaces involves the destruction or removal of any possible product residual so as to prevent them infecting the operators and cross contamination between containers and machine, as well.   From the infeed Turn Table the vials are fed into the External Vial Washing Machine conveyors. The machine consists of two conveyors on which the vials are properly fed and transported from in feed Turn Table for the washing operation. Two operations are carried out on this machine. First the vials are washed by water jet and then dried by air jet. On the sides of the conveyor a set of spray nozzles are fitted on each conveyor for water jet. One set of knifes blocks are provided on each conveyor for air jet The air is sprayed through this knifes. The Knifes are fitted in a inclined manner which ensures that the air that is sprayed reaches each corner of the vial which are previously washed. After washing and drying the vials are guided to the outfeed Turn Table. Before reaching the outfeed Turn Table a special arrangement is provided to dry the vial from the bottom side. A set of syringes are provided on the sides of each conveyor at the exit end which sprays the air jet on the bottom part of the vial resulting in the drying of the vials This machine is completely operated by PLC. A covering of Acrylic cabinet is provided in the machine which when opened up during the operation immediately stops the supply of water & air and shows the indication with alarm in the PLC.

• Brand Name: Ashirwad
• Driven Type: Electric
• Condition: New
• Automatic Grade: Semi Automatic
• Loading Type: Top Loading
• Power Consumption: 440v
• Model Number: ARWM60,ARWM-64
• Certification: ISO 9001:2008 Certified
• Voltage: 220V, 415 V
• Function Type: Semi-Automatic
• Type: Semi Automatic Washing Machines
• Weight: 100-1000kg
• Phase: Three Phase
• Warranty: 1 Year
• Country of Origin: India
• Warrenty: 1year
• Motor Power: 2 HP
• Material: MS< SS
• Dimension: 1500(L)X1750(W)X1300(H)
• Frequency: 50 Hz

DESCRIPTION   Harsiddh Engineering manufactures top quality Linear Bottle Washing Machine for smooth and perfect operation. Their linear bottle washing equipment features six internal zones for washing available with 60 and 120 jets. The machine is quite strong with contact parts manufactured from SS316-grade materials. Other than that, the main machine is constructed from SS304 materials. You can use this tool for washing bottles of approximately 10 to 200ml measurements. Additionally, the machine is also attached with 2tanks and pumps, thus offering smooth operations. Our machines have CE certifications.   One of the most beneficial features of the machine is that its washing order and sequence entirely depend on customer needs. Additionally, the independent cleaning zones ensure zero contamination. The device exhibits a water-consumption capacity of 500 to 700 liters per hour. With this equipment, you will have the opportunity of distinguishing five different washing zones. Power consumption of the equipment is 5.0HP, which makes it energy efficient and low-power consuming. The machine is also capable of producing 240 bottles in a minute and works on the linear cleaning mechanism.   With intermittent systems for washing bottles, this particular device provides a pristine clean washing experience. Automatic infeed and exit options offer complete freedom of operations. With air consumption of 25 to 30 CFM, the device happens to be the best choice for flat as well as round bottles. SALIENT FEATURES 60 Jets for 6 washing internal zone. 20 Jets for External Wash (2 raw x 10). 25 Channel with 10 Pocket on each channel (250 Pocket). All contact parts made of SS316 material. Machine construction in SS304 material. Suitable for 10ml to 200ml Bottle Size*. Washing sequence can be made as per customers’ requirements. Attached with 2 Pumps and Tanks. Each washing zone with independent circuit to avoid contamination. Automatic Infeed and Exit of Bottles. TECHNICAL SPECIFICATION Model No. HLBW-120HLBW-240 Output / Hour 7000 / Hour (Depend on size)14000 / Hour (Depend on size) Direction Linear Tunnel TypeLinear Tunnel Type Bottle Dia. Dia. 32mm to 60mm & 38mm to 180mm in HeightDia. 32mm to 60mm & 38mm to 180mm in Height Bottle sizes 10ml to 200ml10ml to 200ml Contact Parts Stainless Steel 316L Stainless Steel 316L Air Consumption 12 to 15 CFM12 to 15 CFM Washing Zone 5 Zone Or can be set as per customer require sequences 5 Zone Or can be set as per customer require sequences  Pumps & Water Tank 2 Nos. Each having 6000 Litre / hour capacity & Centrifugal Pumps2 Nos. Each having 6000 Litre / hour capacity & Centrifugal Pumps Electrical Input 380 V, 3 Phase, 50 Hz, 4 wire380 V, 3 Phase, 50 Hz, 4 wire Power Requirements 4 H.P. For Main Machine5 H.P. For Main Machine Utilities Fresh Water, DM Water, WFI, Air – 30 CFMFresh Water, DM Water, WFI, Air – 30 CFM Working Height 850 to 950mm adjustable850 to 950mm adjustable Dimension 2700mm (L) X 1400mm (W) X 1550mm (H)3180mm (L) X 2500mm (W) X 1650mm (H)

Shree Bhagwati very critically reviewed vial washing operations in the parenteral section and found methods either very primitive or concepts with probabilities or too perfect and highly expensive. Considering above facts, a very imaginative vial washing machine Model SBVW-150 is devised to ensure simple & modular operation, where each individual vial is positively washed with maximum of seven washes. Operation: The Vial trays are directly un-loaded to the vial tray from which it is pushed on to the turn-table. The turn-table slowly and steadily feed vials to the two tracks feed worm, where vials are automatically inverted. The synchronized star-wheel places two vials, one by one to the two tracks indexing chain. The indexing chain positively carries inverted pair of vials through seven sequential washes. At the end of washing operations vials are reinvented back into original position and collected in the tray.   Salient Features Very compact, rigid, & modular construction. All contact parts with D.M. water and distilled water of S.S. 316 construction and argon arc welded. The unit built on S.S. square pipe frame and totally encompassed with S.S. coverings in pleasing matte finish to avoid corrosion and ease of cleaning even from inside. The washing section is totally covered with acrylic cabinet and collecting trays ensure total removal of water in the drain or recirculation tank Absolutely simple machine, with only six change parts, which can be changed within few minutes. All exposed parts are of S.S. 304 or hard chrome plated brass for corrosion free long life. The seven sets of nozzle enter into the vials mouth during the washing operation ensuring penetration of washing medias to the core A perfect washing principle. Fixed top nozzles at each washing station ensures external washing of vials at the same time of internal washing. The flow of washing medias stop during the indexing of chain, saving straight 25% on utilities. The system of solenoid valves and optional tanks, pumps and filters is engineered for long trouble free life & fool proof operation. The machine construction allows delivery of vials into a separate room or attach directly with tunnel.

• Automatic Grade: Automatic
• Container Type: Tunnel Type
• Container Size: 10 ml to 1000 ml
• Material: Stainless Steel
• Voltage: 220 V/380 V
• Weight: 600-1200 kg
• Filling Speed: 40-240 bottles

• Voltage: 230 Volt / 50 Hz / AC
• Material: Stainless Steel
• Phase: Single phase
• Suitable for: Vials, Bottles & Round Containers
• Electric Load: 0. 5 to 1.5 hp Depend Upon Size.

We are the leading exporters and supplier of this products.

The range of products which we manufacture and supply to the customers are inclusive of a wide range of Ampoule Washing Machines which are used for different pharmaceutical injectable uses such as sterilizing, sealing, filling and washing and these machines offer a high performance. They have been made using the best technology available in the market and they have been priced at very affordable rates in the market and they are used for cleaning the recycling water tanks. Sturdy Well designed High performance

• Production Rate: 200 Vials/Minute
• Model: AVEW-200
• Direction: Left to Right
• -:  
• Vial Diameter: 25mm to 60mm
• Vial Height: 38mm to 120mm
• Powder Supply: 2 H.P.
• Electrical Characteristics: 440 volts, 3 phase, 50 hertz
• Working Height: 900mm
• Overall Dimension: 3850mm (L) x 950mm (W) x 1650mm (H)
• Net Weight: 650 kgs. approx.
• Gross Weight: 950 kgs. approx.

AUTOMATIC LINEAR DOUBLE TRACKS VIAL WASHING MACHINE MODEL : AHVW 120, AHVW 60 Operations: • The vial trays are directly un-loaded to the vial tray from which vials directly transfer to the turn-table. • The turn table slowly transfer vials to the linear washing machine in single track or two tracks feed warm, from where vials are automatically come in to invert position. • The synchronized star- wheel places two vials at a time in two tracks indexing chain or one vials in to the single track machine. • The indexing chain positively carries inverted pair of vials through seven sequential washes. • At the end of washing operation vials are re-inverted back into original and collected in the tray. Pumping station: Tank with valve – 3 NOS. SS 316 pump – 3 NOS. S.S. Filter housings and filter cartridges. Change parts: Change over of each vial size contain star wheels, worms, inverters./div> Technical specifications: SS finish gmp model Dimension: 1600mm l >< 800mm w>< 800mm h Electrical: single phase Output: 3000- 4000 vials per hours in case single track machine 6000- 8000 vials per hours in case double track machine

• Model No.: SBEW-200
• Direction: Left To Right
• Out/Put Up to: 240 vials per minute depend on neck size & vial size
• Electrical Supply: 210 Volts 3 Phase 50/60 Hz (5 wire)
• Power Requirement: 3 HP
• Height of Conveyor: 900 mm (approx.)
• Container Diameter: 25 mm to 6o mm max.
• Height: 38 mm to 120 mm.

We are the main supplier of this product.

• No. Of Syringes: 2 (each 500ml.)
• Electric Connections: 1 HP Electric motor for Main Drive
• Overall Dimensions: 520 (L) x 620 (w) x 750 (H) in mm

Semi Automatic Bottle washing, Filling & Capping Machine The unit is made compact, enclosed in stainless steel elegantly mate mirror finished body. Cam operated Syringes will draw correct volume of liquid and deliver it through tubes to nozzle. Rigid vibration free construction for trouble free performance, S.S.Covers parts for Elegant and easy reach on off switch for total control on operation.

pharmaceutical machinery parts, ampoule labeling machine, Packaging Machines

automatic vial washing machine, Vial Washing Machine

Automatic External Vial Washing Machine, Rotocone Vacuum Filter Dryer