Water Level Sensors Dealers in Vastrapur, Ahmedabad

The P7620A industrial pressure transmitters/transducers are ideal for general purpose industrial applications with considering the performance, reliability and cost. The output signal of the sensing bridge converts to a standardized current or voltage signal through surface mount technology circuit board. This high level signal output with very low noise system is packaged in a rugged stainless steel housing to resist the harsh and extreme environment conditions. Each transmitter is inspected and calibrated to ensure its quality. FEATURES • Temperature compensated • Built-in Amplifier • High level current Output Signal • EMI/RFI protected • Compact construction • Shock and vibration resistance • Zero and span adjustments • False system shutdown prevention SPECIFICATIONS Performance characteristics: Accuracy at 25℃ (linearity, hysteresis, repeatability)≦±0.5% F.SStability at 25℃ ≦0.4% F.S./yearThermal Effect ≦±0.08% F.S./ ℃ Environment characteristics: Media temperature range: -25… +85℃Ambient temperature range: 0… +70℃Storage temperature range: -25… +85℃Compensated range: -40… +135℃Weatherproof rating: IP 65

• Accuracy: +/- 1 %
• Resolution: 0.1, 0.2, 0.25, 0.5 mm Rain
• Collector Area, Stabilized: 199.6 to 200.4 sq. cm
• Collector Diameter, Nominal: 159.6 mm
• Calibration Traceability Offered: IMD

The KDS-071 is a smart sensor that measure rain using the time tested tipping bucket mechanism in combination with modern electronics. It is a precision instrument for the measurement of rainfall accumulation and/or rate. The sensor has a provision for routing the reed closure as per the output, if desired. As it uses advanced micro-electronics, it sits on the same bus as the other sensors and thus does not require a separate input for the purpose.   Electronics also imparts a higher level of precision to the sensor’s operations with optional calibration and rate compensation. Also, mathematical correction for bucket volume errors due to varying rainfall rate is provided. The sensor is designed for outdoor deployment in an unobstructed, open, outdoor area. It can be integrated into a weather station and is also used for flood studies/alerts, catchment measurement, agricultural & horticultural applications, and runoff monitoring.   Features Easy installation and trouble-free operation Deep-set collector funnel optimizes rainfall catch Captive power for measurement Corrosion-resistant materials Floating point math capabilities Rain water temperature Sensing possibility Internal calibration Rain rate computation User-selected units of measurement Digital output; analog option available

We offer ground penetrating radar, the viy series ground penetrating radar (gpr) is used for location and analysis of underground anomalies using electromagnetic pulse radiation. Operation principle of the gpr is based on surveying media illumination by electromagnetic impulses with following echoes analysis because of impulse reflection or scattering by various discontinuities. The gpr is suitable for searching of both metal and dielectric targets (stratiform structures, pipes, voids, building constructions etc.). For more detail visit us: http:www.cablelocator.in

• Brand Name: Honeywell
• Response Time: Less than 2 ms
• Pressure Ranges: 1 bar to 46bar, 100 kPa to 4.6mPa, 15psi to 667psi
• Temperature range: -40 C to125 Deg C
• Total Error Band: +/- 2%
• Life: 10 million Cycles

level sensors, draw latches, 2 Way Joint & Plugs, Foldable Handles

fuel level sensors, Changeover Switches, electronic autogas devices

pressure measurements instruments, Thermometer, Flowmeters

lpg cng level sensor