Water Pumps Dealers in Gidc Vatwa, Ahmedabad

SEA WATER PLUNGER PUMP FOE WWTP PLANT  FLOW 1 - 100 M3/HR AND PRESSURE UP TO 100 BAR  PUMP MOC  : SS 316, DUPLEX , SUPERDUPLEX 

• BRAND: VGT INDIA-
• START WAY: Manual and Electric
• MEDICINE BOX CAPACITY: 16 ltr
• STARTING FROM: Italian Turbine Type
• FUEL CAPACITY: 1.6 ltr
• BATTERY SIZE: 100x70x40 mm
• DIAMENSION: 1180 x 325 x 260 mm

Rotational Moulds India's No. 1 Manufacturer Jaljog Rotomould is one of the leading experts in manufacturing quality molds for rotational molding.  We have sound industry knowledge and expertise in creating different kinds and sizes of molds.  

• Voltage: 220 - 380 V
• Motor Phase: Single Phase
• Power Source: Electric
• Application: Industrial
• Automation Grade: Semi-Automatic
• Grade: SS 304, 316

• Application: Agriculture
• Condition: New
• Shelf Life: 1 Year
• C R Pipe: 4’Long, 5’Long, 6’Long
• Weight: 400gm 480gm 520gm
• Colour: Multi Colour

• Disinfection Tank: Storage Capacity 30 to 40 Liters having Low Level Indicator
• Overall Size (L x W x H): 6.0 Ft x 4.0’ Ft x 7.9 Ft
• Working Voltage: 1 Ph. 230 V AC ± 10 %
• Material for Chamber: Mild Steel Sheet of 14 to 18 SWG Tks with Powder Coating
• Working Environment: Ambient
• Rain Protective: Tunnel Chamber. Suitable for Indoor Operation (open Access Entry are Not Rain Protected)
• Compartment Lengths: Hand Sanitizing – 3.5 Ft x 2.9 Ft & Body Sanitizing – 4.0 Ft x 3.3 Ft
• Spraying Method: By 60 Deg 4 to 6 Ss Nozzles with Adjustable Delay as Required
• Nozzles Spray Isolated: PVC Curtain at Entry & Exit of Disinfecting Chamber
• Disinfection Type: Any Water Based Diluted Solution. (Not in our scope of Supply)
• Hand Disinfection Type: Automatic Non-Contact Disposable Disinfectant
• Sensor at Entry Point: 16” to 24” As person enters the tunnel it will activate operations
• Digital Counter: 12” to 15” to count no. of person entering in Disinfecting Tunnel
• Tunnel Lights: LED based, 220V AC Light with for Spray Area. LED based
• Movability: 04 Nos Nylon Rubber Coated Wheel for ease Transportation
• Stairs Case: Folding Aluminum Chequerd Plate Step at Entry & Exit.

• Shaft Seal Type: Mechanical Seal
• Frequency: 50 Hz / 60 Hz
• Maximum Head: 110 m
• Minimum Head: 5 m
• Installation Position: Vertical/Horizontal
• Maximum Drive Rating: 186 kW / 250 HP
• Maximum Flow Rate: 1500 m³/h
• Minimum Flow Rate: 20 M³/h
• Speed of Rotation: 2900/ 1400 / 950 revolutions/min
• Free Passage (solid Handeling): 20 mm
• Connection to Power Supply: 415 V
• Max. Permissible Fluid Temperature: 50 °C
• Type of Casing: Diffuser Casing
• Type of Impeller: Multi- Vane Impeller/ Closed Impeller

Single Double - Chamber Vacuum spary thanks are used for calibrating and cooling of RPVC and HDPE pipes in vacuum sizing.   Standard Features : Tank with Mild Steel construction Mechanical seal spray pump with high head and high flow rate Mechanical seal vacuum pump Manual longitudinal adjustment on rail Precise Water level control system with visual manometer Water temperature control with thermostat and solenoid valve Dual transparent chilled water inlet filter system for cleaning during operation Height and side manual adjustment Appropriate working platform with aluminium chequred plate Common drain header with 4” x 2nos. Connection 1.5” inlet connedtion Easily cleanable spray nozzles Optional Features : Tank with Stainless Steel contruction Adjustable spray nozzles pipes (above HVT-250 model) Motorized Longitudinal adjustment on rail All piping including spray pipe with stainless steel Insulation on outer side of the tank Special imported spray nozzles Pipe support with central height adjustment Dual disc type water filter in spray pumps with 200m mesh (manual back flushing) Glycerin filled pressure gauge on disc type water filter to see blockage of filter

Our CAPIUS brand Bitumen sprayers, gives unbroken and specify quantity of bitumen or emulsion. These units can be supplied as a module to suit mounting on customer's truck chassis or can be supplied completely along with standard truck chassis. The unit has a built in heating system with a high capacity imported burner to heat the bitumen to the required temperature. Various fuel options as well as burner options are offered on specific requests. The Insulated Storage tank clad with Industrial gauge steel sheets built strictly to Industrial codes for storing, handling and transportation of Bitumen. The cladding is optionally available in a wide range of options ranging from Galvanized, Aluminium or Stainless steel sheets. A unique pressure cleaning system is a standard, which cleans the system after use and avoids blockages at the end of days work. Each unit comes loaded with a speed detection & driver control system, air compressor, diesel engine, High capacity positive displacement internal gear type asphalt pump, remote control station, hand spraying attachment. The horizontally folding spray bar is supplied with a basic width of 2.4 Meter extendable up to 4.2 Meter. The Fully circulating spray bar can deliver bitumen at pressures ranging from 0- 6 kg/sq m. All units are supplied with an inbuilt bitumen charging / loading system. The bar is pneumatically operated and easily adjustable. Complete range of Truck Mounted Bitumen Sprayer models with rated Capacities of 3000 to 12000 Litres. Complete range of Trolley Mounted Bitumen / Emulsion Sprayer models with rated Capacities of 500 to 3000 Litres. .Salient Features Fully - Insulated tank Bitumen tank cladded with S.S. / G.I. sheet with Cera / Galss Wool. Efficient air cooled diesel engine and positive displacement gear pump with lower fuel comsumption. Designed as to suit standard truck chassis. High efficiency heating system. Safe and ease of operation. Foldable Spraybar Hand spray bar. Unique pressure cleaning system. Suitable for bitumen emulsion. The Bitumen Sprayer consists of Fully Insulated (Galvenised / S.S. Sheet) bitumen tank fitted with automatic burner for eating the bitumen at required temperature. Bitumen Pumping system comprising of positive displacement gear type bitumen pump, bitumen lines and valves. 25 H.P. Air cooled two cylinder Engine. Air Compressor. Foldable spray bar with basic width 2.5 mtrs. and extendable upto 4.2 mtrs. is fitted with pneumatically operated and easily adjustable nozzles placed at standard pitch of 225 mm. Spray bar delivers bitumen at pressure ranging from 0 - 6 kg/sqm Manual hand spraying attachment. Controls: The spraying system incorporates some of the best controls in terms of automation and operation as well as maintenance making the quipment very rugged, easy to use & maintain. Theautomation provided is based on the parameters of asphalt required per unit area for a given job and the required flow of asphalt is controlled automatically based on the speed of the truck.