Welding Gauge Dealers in Ahmedabad

4 quick steps check internal alignment You can check the internal alignment of your fit-up quickly with the G.A.L. HI-LO gauge. 1. Unlock the retaining screw. Press the gauge legs beyond the barrel. 2. Insert the legs (wires) into the root gap space or the two pieces of pipe to be fitted.     Turn the gauge 90°, being careful to apply a constant back pressure to the barrel. 3. Hold the gauge as square as possible with the fitting to obtain an accurate reading.      Lock the retaining screw. Reverse the 90° turn and remove the gauge. You are now  ready to read the increment opposite the red line. 4. When the red line aligns with the 1/32 increment line you have a good internal      alignment and fit-up. Misalignment can be determined from the zero line by      increment markings of 1/16 inch. Easy operation determines rootweld spacing. 1. Unlock the retaining screw and insert the gauge interior alignment stops between the two      pieces of pipe to be fitted. 2. Insert the leg with the longer taper into the root gap until it makes contact with both sides of  the gap. 3. Re-lock the retaining screw, remove the gauge and read it. 4. The scale is calibrated in fractional dimensions from 1/32 to 3/16 in 1/16 inch increments.      The read-out you receive represents the amount of rootweld gap.

We are a leading organization of the domain, engaged in offering an effective array of Fillet Welding Gauge Calibration Service for customers. These offered calibration services are rendered using high-quality support and modern technology. Apart from this, these calibration works are rendered according to the client's desires.  

WELD FILLET GAUGEA versatile tool for the use of welding operator. The tool can be used with ease for weld joint preparatory functions as well as for checking of the weld joint. The tool combines a bore gauge, angle gauge, depth gauge & weld height gauge. The tool is made in stainless steel with polish finish.

Our company is highly established and reputed company manufacturing and supplying superior quality, high performing and oipe ring gauge Flanges of any size so that exact needs and requirements of customer can be catered. While manufacturing these Flanges, we use excellent quality raw materials and highly advanced manufacturing tools, which enhance quality and reduce cost of the products. Our range of products is made following guideline of certified quality and norms of international quality standards and also offers the same at affordable prices.

Bridge cam weld gauge this rugged gauge is fabricated in stainless steel used to measure the important dimensions of weld preparations & of completed butt and fillet welds. It is intended for general fabrication work in the shop or on-site. It rapidly measures angle preparation (0° to 60°), excess weld metal, fillet weld leg length, throat length, misalignment & hole sizes for butt weld, butt-weld reinforcement, general linear measurement upto 60mm or 2 inches- scales are graduated in metric units & supplied in a preventive case with instruction leaflet.

• Diameter: 20mm
• Country of Origin: Made in India
• Weight: 190g
• Length: 6inch
• Brand: Saumya
• Measuring Range: 0-25mm

Gauges For Pvc And Hdpe Pipes

Bridge Cam Gauge, Ferrous DFT Meter, Chlorine Meter, Analog Tachometer

Digital Welding Gauge, Transit Vernier Theodolite, Proving Rings

Diameter Tape / Circumference Gauge, Lever Operated Direction Control Valve

Weld Pad Flat Glass Level Gauge, Magnetic Oil Level Gauge

Welding Gage, Insize Digital Height Gauge With Driving Wheel