Wika Pressure Transmitter / Pressure Sensor Dealers in Ahmedabad

We propose high quality pressure gauge,A pressure sensor with transmitter which measures pressure, typically of gases or liquids.

Specifications : Pressure Range : 0-0.1 MPa ~ 6MPa Over load : 150% FS Burst pressure : 300% FS Output : 4-20mA, 1-5V/0-5V, 0-10V ; 2 mV/V , 3.33mV/V Power supply : 12-36VDC; 10VDC Response time

• Brand Name: Wika, Wika / Baumer
• Material: Aluminium
• Driven Type: Battery
• Color: Blue, Silver, White
• Application: Industrial Use, Pressure Measurement
• Certification: CE Certified
• Feature: High Performance
• Type: Pressure Transmitter
• Weight: 100-150g
• Frequency: 50Hz
• Country of Origin: India,India
• Temperature: -25 +85deg C, -40 +70deg C, -45 +55deg C, -70 +40deg C

• Feature: high-quality
• Electrical Connection Standard: Connector DIN 175301-803-A or C, M12x1, swift connector
• Accuracy: +- 0.35% fs
• Usage/Application: Liquids and gases
• Operating Range: 0.05 - 0.6 bar

• Usage/Application: Industrial
• Voltage: 240V

  When digitally integrated with Honeywell’s Experion® Process Knowledge System or other TDC/TPS systems, ST 3000 instruments provides local measurement accuracy to the system level without adding typical A/D and D/A converter inaccuracies as well as providing advantages from the many other on-board advanced diagnostic features. Honeywell’s high-performance ST 3000 S100 transmitters lead the industry in:  Accuracy  Stability  Reliability  Rangeability  Warranty       DescriptionThe ST 3000 transmitter can replace any 4 to 20 mA output transmitter in use today and operates over a standard twowire system. The measuring means is a piezoresistive sensor, which actually contains three sensors in one. It uses a differential pressure sensor, a temperature sensor and a static pressure sensor in delivering the most comprehensive compensated output signal available today. Microprocessor-based electronics provide higher spanturndown ratio, improved temperature and pressure compensation, and improved accuracy. The transmitter’s meter body and electronics housing resist shock, vibration, corrosion, and moisture. The electronics housing contains a compartment for the single-board electronics, which is isolated from an integral junction box. The single-board electronics is replaceable and interchangeable with any other ST 3000 Series 100 or Series 900 model transmitters. Advanced DiagnosticsST 3000 is now available for both HART® 6 and FoundationTM Fieldbus with advanced diagnostics that minimize unplanned plant outages, minimize maintenance costs and by providing the industry’s most reliable transmitter. Provide advanced warning of possible failure events and avoid costly shutdowns. Three levels of failure reporting Comprehensive list of on-board diagnostics (Ref. ST 3000 User manual with HART® 6, 34-ST-25-17 Rev: June 09 and FoundationTM Fieldbus option manual 34- ST-25-15 Rev: June 09) Configuration ToolsLike other Honeywell transmitters, the ST 3000 features two-way communication and configuration capability between the operator and the transmitter through several Honeywell field-rated portable configuration devices, including the Smartline Configuration Toolkit and the Multiple Communication Configurator (MC ToolKit). While both are made for in-field use, the MC Toolkit also can be ordered for use in intrinsically safe, Class I, Div. 1 environments. The SCT 3000 Smartline® Configuration Toolkit provides an easy way to configure instruments using a personalcomputer as the configuration interface. The toolkit enables configuration of devices before shipping or prior to field installation. The SCT 3000 can operate in the off-line modeto pre-configure an unlimited number of devices. This database can then be loaded down-line during instrument commissioning. Features Choice of linear or square root output conformity is a simple configuration selection. Direct digital integration with Experion PKS and other control systems provides local measurement accuracy to the system level without adding typical A/D and D/A converter inaccuracies. Unique piezoresistive sensor automatically compensates input for real-world temperature and static pressure variations. Added “smart” features include configuring lower and upper range values, simulating accurate analog output, and selecting preprogrammed engineering units for display. Smart transmitter capabilities with local or remote interfacing means significant manpower efficiency improvements in commissioning, start-up, and ongoing maintenance functions. ST 3000 transmitters feature full Dual-Seal certification based on ANSI/NFPA 70-202 and ANSI/ISA 12.27.01 requirements without the use of additional seal protection elements. ST 3000 transmitters are available fully compliant to SIL 2/3 requirements as a standard option.

• Application: Shipbuilding
• Brand Name: Baumer
• Pressure Ranges: -1 0 bar up to 0 600 bar & M bar Range
• Output Voltage: 4-20 mA / 11 28 VDC 0-10 V / 14-28 VDC
• Process Connection: 1/4
• Usage/Application: Industrial Process Monitoring
• Model Name/Number: Y91
• Output: 4..20 mA / 0..10 Vdc / 0..5 Vdc

• Application: Machine building,Hydraulics and pneumatics,Pumps,Chemical industry
• Application: Water,Air
• Material: SS-316L
• Model Name/Number: S-10/S-11/A-10/O-10
• Brand: Wika
• Voltage: 10 to 30 V DC
• Accuracy: +-0.50 % of span
• Operating Range: 0 ... 0.1 to 0 ... 1,000 bar
• Protection Type: IP 65
• Output Type: 4 ... 20 mA,DC 0 ... 10 V,DC 0 ... 5 V
• Pack Type: Box
• Mounting Type: Direct 1/2" BSP (M) Thread Type
• Finishing: Polished

• Feature: Low Cost for High Volume OEM Installations,Pressure Ranges from 0-15 PSI to 0-250 PSI,.25% Full Scale Accuracy, Small Package Size,316L Stainless Steel Wetted Parts,Absolute, Gauge, and Compound Pressure Rangesz
• Application: Refrigeration Systems,Medical,Oil & Gas,Industrial OEM

• output signal: 4-20 mA
• Pressure: 0-5 Bar
• Power Supply: 24VDC
• Protection type: IP65

• Brand Name: Fuji
• Usage/Application: Industrial
• Voltage: 12- 24 V DC
• Accuracy: Less than or equal to +/- 0.5% FS
• Operating Range: -40 to 55 Degree C
• Ip Rating: IP65
• Pressure Range: -1 to 39 Bar
• Output Current: 4- 20 mA

• Brand Name: Danfoss
• Material: Stainless steel
• Application: Air and Oil
• output signal: Ohm
• Temperature: 200 Degree Celsius
• Model Name/Number: MBT 5260
• Accuracy: <_ +-0.3% FS
• Output: 0 / 10 V
• Supply Voltage Process: 10 / 30 VDC
• Net weight: 0.14 kg
• EAN: 5702423082520
• Ambient temperature max. [ DegreeC]: 125 Degree Celsius
• Ambient temperature max. [ DegreeF]: 257 Degree F
• Connection standard: ISO 228
• Connection type: G
• Electrical conn. Male/Female: Male and Female
• Electrical connection: Plug
• Electrical connection size: Pg 9
• Electrical connection standard: EN 175301-803-A
• Enclosure rating IP: IP65
• Insertion length [in]: 1.97inch
• Insertion length [mm]: 50mm
• Insertion type: Fixed
• Number of terminals [pcs]: 3pc
• Process connection size: 1/2
• Process connection standard: ISO 228-1-A
• Process connection type: G
• Process Connections: G1/2,ISO 228-1-A
• Protection tube diameter [in]: 0.31inch
• Protection tube diameter [mm]: 8
• Protection tube material: AISI 316 Ti
• Sensor elem. resistance [Ohm]: 100 Ohm
• Sensor element standard: EN 60751
• Sensor element tolerance: Class B

Through transition from pressure data to electric signal, it can transfer the signal to PLC to control the compressor and showing the real pressure data on the LCD.

Pressure Transmitter

• Power Supply: 11-30 Vdc
• Brand Name: Baumer
• Model Name/Number: CTX Series
• Measurement Range: -1 to 200 Bar
• Accuracy: 0.5% of reading
• Signal Output: 4-20 mA
• Operating Temperature: 85 Degree C max.
• Diaphragm: Ceramic
• Connection: G1/4 thread
• Housing: SS304
• Measuring Principle: Thick film on Ceramic

A prominent supplier of huge range of Pressure transmitters.

Since Inception, We Are Engaged In Facilitating Our Customers By Bringing Forth Pressure Transmitter. Extensively Demanded For Pressure Measurement Of Water, Oil, Mild Corrosive Liquid And Gas, These Transmitters Are High In Efficiency And S Installed With Pressure Gauges, Transmitters And Switches. Acts As A Transducer, These Transmitters Can Also Be Used To Measure Variables Such As FluidGas Flow, Speed, Water Level And Altitude Indirectly. Manufactured Using Stainless Steel, The Pressure Transmitter Offered By Us Can Be Assembled To Diaphragm Seals For Special Applications.

• Application: Industrial Use

MEAS Pressure Transmitter Range : up to 1000 Bar.