Wood Machinery Dealers in Ctm, Ahmedabad

• Material: Mild Steel
• Power: 7.5 kW
• Automatic Grade: Fully Automatic
• Voltage: 380 V
• Country of Origin: Made in India
• Model Name/Number: DL1500
• Brand: Art Auto Machinery
• Bed Length: 1500 mm
• Centre Height: 150 mm
• Frequency: 50 Hz
• Phase Type: Three Phase

• Brand Name: Raghav Technologies
• Voltage: 380 V
• Frequency: 60 Hz
• Material: MS
• Model Name/Number: RT-1325S
• Automation Grade: Fully Automatic
• Spindle Speed: 18000 RPM
• Working Area: 1300 mm x 2500 mm x 350 mm
• Working Accuracy: 0.01 mm
• Spindle Power: 6 kW HSD Italian Spindle
• Max.Rapid Travel Rate: 20000 mm/m
• Guide Rail: 20 mm
• Phase: Three Phase

• Brand: Umiya
• Material: MS
• Model Name/Number: U-1325
• Power Consumption: 4HP
• Usage/Application: Industrial
• Automation Grade: Automatic
• Stepper Driver: Leadshine
• Control System: DSP with USB Interface
• Clamping System: Manual or Vacuum bed (Optional)
• X, Y, Working Area: 1300mm x 2500 mm
• Z Working Area: 200mm
• Traveling Position Accuracy: +-0.05mm
• Repositioning positioning Accuracy: +-0.05mm
• X, Y, Structure: Quality gear Wheel for XY axis
• Z Structure: Quality Ball Screw For Z axis
• Table Surface: T-Slot Working Table
• Body Structure: Steel Structure with six legs
• Max Working Speed: 25000mm/min
• Max Rapid Travel Rate: 45000mm/min
• Spindle Power Motor: 4Hp Water Cooling
• Guide Rail: 20mm Sqaure Rail for XYZ axis

• Brand Name: Nihar
• Application: Staircase Column, Chairs Legs, Cylindrical, Conical Carving
• Model: NR 147
• Working Job Size (Max) Dia: 300mm x 1500mm
• Working Job Size (Min ): Dia 20mm x 200mm
• Repositioning Accuracy: ±0 05mm
• X-Y Movement: Taiwan Rack & Pinion Transmission
• Z Movement: German Rolling Ball screw
• Working Voltage: 3θ/ 380V/ 50 Hz
• Motor Power: 4KW (Variable Speed 0-3500 RPM)
• Spindle Power: 22 KW Air Cooled (0-18000 RPM)
• Drive Motor: Stepper
• Command: G Code (*.mmg, *.tap,*.plt)
• Computer Interface: USB
• Controls: NK 105
• Collet Size: 6mm, 8mm, 12mm
• Computer Interface: Turning / Cylindrical Surface Carving / Flat Surface Carving

We make available Wood Fire Mini Mawa Making Machine which is reckoned for its make and long service life. We are associated with a group of quality auditors who check the offered lot on several parameters for ensuring quality compliance of the products. Our clients can rest assured for the safety of their financial details, along with quickness in payment processing.

• Features: Superior functionality, Minimum maintenance, High performance.
• Country of Origin: Made in India
• Bag Type: Splited Bag
• Power (Hp/ kW): 5 hp
• Material: MM, SS

Vertical Bailing and Bagging Machine offeredcome backed by advanced technology support and successfully match up to the demands of compressing and packaging loose materials. These bailing systems provide for compact bailing support and come with of easy handling interface. Some of its features include allows for quick bailing support, ideally suited for plant fertilizer factories, fabric manufacturers and others; highly efficient in performance, coming with quick bailing action of different bale weights, models can also be developed in OEM specifications as demanded by customer, promotes work efficiency, provides for increasing baling productivity among others. Baling Applications: wood shavings chopped straw paper shreds chaff rice hull cotton seeds rags peanut shells mineral cotton fiber and other similar loose materials. Main Features Automatic Baling and Bale Ejecting which promotes work efficiency and saves labor cost Availability for Bagging enables the compacted bales to be ejected directly to the bag at the outlet of the chamber One Button Operation makes baling, bale ejecting, and bagging a continuous process. This saves time, and it also saves money, as one person can do the job. One-time Material Feeding for increasing baling productivity.

• Brand Name: Mahavir
• Phase: Single Phase
• Voltage: 240 V
• Moulding Table Size: 18 x 6 Inch
• Up and Down Size: 2.5 Inch
• Moulding Block Width: 1.5 Inch

if you require wood dryer machine for please specify following. 1. The capacity of wood dryer in cubic feet or cubic meter2. Which fuel you want to use? - fired wood / diesel oil / natural gas / electricity3. Which heating media you want to use in dryer - steam / oil4. Which wood you want to season, size of wood and relative humidity in wood?5. Would you prefer civil construction or insulated panel type chamber6. Other specified requirement.thermal wood seasoning systems working in more than 140 factories in india as well as abroad. We are manufacturing wood dryer since 1979 and since then we have created trust with operators and manufacturers. the concept of global quality pursued by constant research for the most reliable materials, simple and precise drive and control electronic system for seasoning cycle with personalized programs, manufacturers top level standard as for production and quality as well as reproducible results having consistent quality. equipment for wood dryer machine are made out of best quality of material like ms steel sections. Heat transfer grade steel tube fin tubes type heavy duty heat exchangers suitable to use steam, thermic fluid oil system, hot or superheated water system.provisions to exhaust humid air from interval of the chamber with a recall of fresh air of the same time through purpose built dampers. the main components for wood dryer are. • the heating device• the humidification device• the device for air circulation and replacement.• the cycle programming and control device.• all the parts and component of plants in special version are planned and manufactured to work at high temp.

• Application: FOR PALLATE WOOD CUTTING
• Brand Name: KARNAVATI
• Power: 6 H.P.
• Cutting Disc Size: 12 inch
• Automation Grade: Semi-Automatic
• Adjustable Height: Without Adjustable Height

wood working machines , randha machine

• Automatic Grade: Semi-automatic
• Rated Power: 3 HP
• Spindle Speed: 26000 rpm
• Resolutions: 0.075 mm
• X-Y-Z Axis Working Area: 1400 x 2600 x 200 mm

wood lathe machine

• Phase: 1/3 Phase
• Country of Origin: Made in India
• Material: MS/SS
• Usage/Application: Wood
• Automation Grade: Semi-Automatic

• Features: Rust-proof Optimum functionality Low maintenance

We are instrumental in offering a wide range of Wood Cutter Machineto our clients. In compliance with the set industry norms, our provided machine is manufactured by us making use of optimum grade components and cutting-edge technology. The offered machine is widely used in furniture making industries for cutting wood with impeccable finish. This machine is widely acclaimed by our clients for its high operational fluency and corrosion resistance features.

Aqcor inc. designed and manufacturer of cnc plasma cutting machines, cnc routers, cnc laser cutting machines, cnc glass cutting machines and cnc engraving machines. The requirements for the cnc machines are from different branches of different manufacturing industries. These include the automotive industry, advertising, glass industry, medical, research & development and research institutions, the mechanical engineering, electrical engineering, fabrication industry, panel building, pharmaceutical industry, the food industry, the ship manufacturing industry, aerospace, architecture, jewelry crafts, prototyping, engraving, schools, museums, universities and many other institutions and industries from around the world.

wood shredder making machine, Autoclave, Eto Sterilizer

Cnc Wood Turning Lathe Machine, Panel Saw, portable edge bander

Wood Working Machinery, Machinery Parts, Lathe Machine, Milling Machine

Wood Working Machinery, Plywood Panel, specialized decorative paper

Wood Effect Powder Coating machine

wood processing machinery, Automatic Vacuum Membrane Press Machine

Wood Door Making Machine

Wood Working Machinery

cnc wood turning machine, C Type Power Press, CNC Machine

Wood Working Machine, Engineering Products, Lathe Machine, Milling Machine