Worm Gearbox Dealers in Ahmedabad

• Material: Cast Iron
• Color: Grey
• Finishing: Polished
• Driven Type: Electric
• Brand Name: Morcon

worm reduction gear box We have emerged as the leading manufacturing, trading and supplying of the premium quality Worm Gear Box. we use superior quality raw material and advanced technology as per the set industry norms. These products find application in various industries. Our offered products are rigorously tested by our quality controllers on well-defined parameters in order to deliver flawless range at the client’s end. We provide SNU WORM GEARBOX in vertical downward/upward position which know as FLANGE MONTED WORM GEARBOX Features: Reliable performance Compact design Low maintenance Product Details: Range : Center Distance 3” to 8” Ratio : 10:1 to 70:1 Types : Horizontal, Vertical, Flange monted

WORM GEAR REDUCTION UNITS : Reduction gear unit are manufactured in different sizes in adopter types as well as solid foot mounting type to transmit minimum 0.05 HP. With selection of correct sizes. Normally available in reduction ratio of 5 :1 to 70 : 1.   WORM : The worm is Solid with shaft made of high grade alloy steel so as to give hard wear resisting surface duly case hardened & super finished. The Bearing & Oil Seal generals are accurately, cylindrically Ground to give smooth running.   WORM WHEEL : It is made of centrifugally cast phosphor Bronze rim shrunk and keyed on cast iron center block on bigger unit and solid casting for smaller units. The teeth are hobbed on gear hobbing machine.   GEAR HOUSING : It is made of close grain graded cast iron. Large cooling fins on both sides and adequate cooling area improves efficiency.   BEARING : The ball or roller bearings are used in worm wheel with ample capacity so that is can take journal and thrust loads.   OIL SEAL : Best quality of oil seal are used (fenner)   SPECIFICATIONS : Wherever they can be applied in material and construction, they are made almost to I.S.S. 3734 – 1966 for worm gearing or DIN or Latest ISI standard.   GUARANTEE : Every “CROWN” worm reduction gear units is guaranteed for “ONE YEAR” against manufacturing defects. If any gear is becoming defective within guarantee period the same will be replaced free of charge provided it is sent to our works on site carriage paid. Any defect caused by accident on transit or miscue is not covered by guarantee.

• Type: Transmission Gears
• Color: Blue
• Country of Origin: India
• Size: NU 2 INCH TO 10 INCH
• Brand Name: MECON
• Warranty: 12 MONTH

Offering you a complete choice of products which include worm reduction gearbox, foot mounted worm gearbox, hollow output worm gearbox, double output shaft worm reduction gearbox, aluminum worm reduction gearbox and worm gear reducer.

We manufacture various types of Worm Reduction Gear Boxes having a number of industrial applications. It is designed by our skilled technicians for friction free and energy efficient performance. The size of the particular unit either by way of input horse power or output torque. The design of such gears is based on industry set parameters, such as dimensional stability and accuracy. Features: High Accuracy Easy to integrate Corrosion resistant High friction coefficient Various sizes Specifications: Material: Casting Iron Torque: 13 - 1550 nm Size: 40 - 250

• Type: Worm
• Material: Aluminum
• Style: Horizontal
• Certification: ISI Certified
• Color: Grey
• Finishing: Polished
• Driven Type: Electric

Our company is ranked amidst progressive distributors of the product in Ahmedabad(India) as well as varied other marketplaces. Procurement of the product from us is profitable, as we can provide it in wholesale any time of the year and ensure delivery is done on the postulated time.   Aluminium body worm gearboxes ( Nmrv Gearbox ) Details : Sizes :  CD-30, CD-40, CD-50, CD-63, CD-75, CD-90, CD-110, CD-130, CD-150 Power capacity :  Up to 15 KW Case :  Up to 90 in die-cast aluminum and over 110 in cast iron Ratio available between : 7.5:1 to 100:1 All gearboxes are supplied complete with synthetic oil and allow for different mounting position, without modify lubricant quantity. Warranty : One year from the date of supply.

• Country of Origin: India
• Type: WORM REDUCTION
• Material: Mild Steel
• Brand Name: SUN
• Mounting Type: Foot
• Color: Blue
• Orientation: Horizontal
• Condition: New
• Gear Type: Worm
• Warranty: 1 Year
• Style: Horizontal
• Packaging Type: Wooden Box

• Material: Cast Iron,CAST IRON
• Finishing: Polished
• Driven Type: Electric
• Gear Type: Helical
• Color: Green
• Condition: New
• Pressure: High Pressure
• Motor Power: 1-3hp, 3-5hp, 5-7hp, 7-10hp
• Power Rate: 9-12 Kw
• Usage: Conveyor, Robotics, Pharmaceutical Machinery, Food Packaging Machinery, Chemical Machinery
• Style: Vertical
• Certification: ISI Certified
• Voltage: 110V
• Capacity: UP TO 19 KW
• Packaging Type: Wooden Box
• Hardness: 55 TO 58 HRS
• Specialities: Rust Proof, Long Life, High Performance, Easy To Operate
• Dimension (LxWxH): 275x90x285mm, 480x190x285mm, 580x260x465mm
• Weight: 100-200 Kg
• Mounting: SHAFT MOUNTED
• Warranty: 1 Year
• Country of Origin: India,India
• Input Speed: 700rpm, 2800rpm, 2100rpm, 1400rpm
• Orientation: Vertical
• Output Speed: 72 RPM
• Output Torque: 18000
• Temperature: 50° C
• Corrosion Resistance: Yes
• Witdh: 50-80mm, 80-120mm
• Running Noise: 60 DB
• Type: SMSR
• Brand Name: RAM
• Warranty: 12 MONTHS
• Bore: ALL SIZE
• Packaging: WOODEN BOX 📦
• INPUT RPM: 1440, 2880 .
• Power(HP): 25

• Brand Name: Omicron
• Color: Blue
• Gear Type: Worm
• Material: Mild Steel
• Input Speed (rpm): 1400 rpm
• Mounting: Flange

In order to attain maximum client satisfaction, we check the product quality on several counts at several stages. As a respected name in the domain, we supply only premium Horizontal Worm Reduction Gearbox at affordable price.

• Brand Name: MURACO POWER

We are leading manufacturer of all types of gear boxes in wide range. 1) bevel gearbox 2) crane duty gearbox 3) cycloid gearbox 4) helical gearbox 5) offset gearbox 6) planetary gearbox 7) right angle bevel gearbox 8) sequential gearbox 9) shaft mounted gearbox 10) spiral bevel gearbox 11) worm gearbox 12) speed reduction gearbox gear boxes: as per iso din bsw standards in 0.25 module to 20 module up to 120" (3000 mm) with 18" (450 mm) face. muratech engineering have expertise and specialized setup for manufacturing of extrusion machine gearboxes.

Driven by a vision to achieve significant growth in this industry, we are committed towards providing a wide array of Reduction Gearbox. Features: • Durable • Robustness • Fine finish

We offer planetary gear box, which is fabricated using accurate, case hardened sun and planet gears that are placed between large, anti-frictional bearings. Our range of planetary gear boxes is available in different ratios, mountings with input and output configuration to suit the requirement of client. Features: Optimum performance Light weight Reliable Long functional life

• Brand Name: Rotomotive
• Gear Type: Worm
• Material: Aluminium
• Mounting: Flange and Foot
• Output Torque: 350Nm
• Input Speed: 1500 rpm
• Orientation: Horizontal
• Usage/Application: Industrial
• Gearing Arrangement Type: Worm
• Rated Power: 10kW

• Orientation: Horizontal
• Mounting: Flange
• Warranty: 1 YEAR
• Country of Origin: Made in India
• Features: Rugged design, High functionality, Quality assured.
• Usage/Application: Industrial
• Gearing Arrangement Type: Worm
• I Deal In: New Only

We are one of the prominent suppliers of worm reduction gearbox. the worm reduction gearboxes offered by us are used in various industrial applications. They are made from the best quality raw materials. They are remarkable for their maintenance free operation.

Ever since Elmech Engineering Company's establishment 15 years ago, we have strived to achieve new frontiers of technical excellence. Gear units are manufactured in different sizes and ratios in adaptable, SU and Fix mounting type. It is available from 44.5 mm to 304.8 mm centre distance and 5:1 to 70:1 in single stage and upto 4900:1 in double stage. Gear Case : Gear case abundant ribs which augment heat dissipating area. It is robust in construction, made of close-grained cast iron. It is completely oil-tight and dust-proof. Worm / Worm Wheel : The worm is made of case - hardening alloy steel. Worms are generated on thread milling machines, gas carburized and profile ground. Worm wheels are made of phosphorous bronze. Worm wheels are hobbed on precision hobbing machines. Gear design ensures uniform transmission of angular velocity under all load conditions with higher efficiency. Bearings : The worm and worm wheels are sustained on ball or roller bearings of sufficient margin of safety to permit adequate thrust loads. Wheel Shaft : The wheel shaft is made of high tensile carbon steel. It is of large diameter to hold the torsinol as well as bending loads. Lubrication : Lubrication of gears and bearings is by splash of oil from the pump. Oil is not supplied with the gear unit. Occasional topping - up of oil is required. Branded oil seals are fitted on input and output shafts. First change of oil be made after 500 hrs of operation. Subsequent oil change must be made after 3000 hrs of operation / 12 Months (whichever is earlier). Synthetic Lubrication is also available upto 3:0" gear units : Gear units are satisfactorily operational in cement, plastic and other numerous industries. Units will work safely provided that theu are selected, installed, used and maintained properly.

We are engaged in manufacturing and supplying Worm Gears. The offered gears are used for transmission of power in cooling tower fans. They are ideal for heavy duty use and are known for noise less operations. We employ innovative tools and techniques for making products in sync with the industry standards. Specifications: Type: Cooling Tower Type Available range(Size): 101.6 to 431.8 Power transmitted up to 475 HP