Zoloto Valves Dealers in Shahpur, Ahmedabad

• Material: Stainless Steel
• Color: White
• Automatic Grade: Manual
• Actuation Type: Single Acting
• Usage: Water Fitting
• Packaging Type: Wooden Box
• Mounting Type: Vertical
• Overall Length: 6-10 Inch
• Valve Size: 1inch
• Finishing: Coated
• Condition: New

• Size Range: 40MM(1.1/2”) TO 1000MM(40”)
• Butterfly Valves Design: BS 5155 / API 609 / MSS SP 67 & ISO 5752
• Pipe Flange: TO SUITE FOR 125/150 ANSI CLASS, TABLE – D,E,
• Pressure Testing: BS6755 PART I
• Standards: BS 4504 PN10/16, IS 6418 TABLES 6 TO 9 & IS 6392 TABLE 10 TO 20
• Body: Wafer type / double flanged end designed to withstand specified pressure intergral cast feet as standard scope of supply for big sizes.
• End Connction: Wafer End / Flange End / LUGG Type
• Operation: Hand Lever, Manual Gear Box, Electrical Actuator With Turn Worm Pneumatic Operated.

Designed for high-pressure and high-temperature applications for a wide range of fluids excepts slurries and viscous fluids.

Plug valves are designed and manufacturers s per standard norms and variety of materials.CS body,CI body,SS 304, SS 316 body and Bronze / GM Plug valves have end connections as per customer requirements.Our plug valves have Screw end ,Socket Weld End and Flanged End connections.We have two way as well as three way Plug Valves.

• Brand Name: PROLINE VALVES
• Material: CAST IRON DUCTILE IRON S.S. 304 S.S. 316 S.S. 316L DUPLEX S.G IRON ALUMINIUM M.S
• Type: WAFER TYPES, DOUBLE FLANGE TYPE LUGGED TYPE DAMPER TYPE, FABRICATED TYPES ALL TYPES OF BUTTERFLY VAL
• Technics: ALL TYPES OF BUTTERFLY MANUFACTURER IN INDIA, LOWEST CHALLENGING RATES IN INDIA FOR BUTTERFLY VALVES
• Place of Origin: AHMEDABAD
• Power: ALL TYPES OF POWER AVAILABLE WITH ELECTRICAL ACTUATOR OPERATION
• Pressure: PN 05, PN 10, PN 16, 150 #, 300# 600#
• Structure: CETRIC DISC DESIGN, OFF SET DISC DESIGN, DAMPER TYPE
• Media: WATER, AIR, OIL, STEAM, VACUUM, VARIOUS CHEMICAL, SLURRY, CHILLER WATER AND MANY MORE
• Port Size: 15 MM TO 500 MM

AMTECH offers gate valve -150 to 600 class in Flanged end , 800 to 2500 class in Threaded / buttweld/ socket weld end.Gate valves are generally designed to serve as isolation valves. In service, these valves are either fully open or fully closed. When Gate valves fully opened , the media which flows through the valve in a straight line with very little resistance. Gate valves must not be used in the regulation or throttling of flow media because of accurate control is not possible. Also , high-flow velocity of media in partially opened valves may cause erosion of the discs and seating surfaces area. The Vibration of wedge may also result in chattering of the partially opened valve disc. Gate valves are also operated by chain pulley when they mounted at height in plant. The Gate valves are used in thermic fluid with high temprature upto 350 degree.   Specification    

• Design & Manufacturing Std: API 6D
• Testing& Inspection Std: API
• Face to Face: As per ANSI B 16.10
• End Connection: F/E Drill as per ANSI B 16.5 150#,300#,Table-D,E,F

Non Return Valve offered by us are the best used in the industry. The range varies from wafer type lift & swing type non-return valve. Swing Check Valves are provided with properly guided swing disc through a hinge. The hinge and swivel disc are connected maintaining sufficient flexibility for smooth and efficient sealing. Series Non Return Valves are available with metal-to-metal sealing for high temperature and pressure, soft sealing for pneumatic and vacuum applications. The Non Return Valves are designed to ensure full flow, efficient function, and minimum pressure drop across the valve.

• Feature: Long service life, User friendly, High stability
• Material: Brass
• Brand Name: Forwell
• Application: Industrial
• Pressure: Low Pressure
• Connector Type: Flanged End
• Temperature Of Media: Low Temperature

Ball Valve include the after effect of Innovative designing. It epitomizes all the quality, Performance, esteem and security highlights required for basic applications. A ball valve is a type of quarter-turn valve which utilizes an empty, punctured and rotating ball to control move through it. It is open when the ball's gap is in accordance with the stream and shut when it is turned 90-degrees by the valve handle. The handle lies level in arrangement with the stream when open, and is opposite to it when shut, making for simple visual affirmation of the valve's status.

• Valve Size: 1/2 -24 Inches
• Country of Origin: Made in India
• Types: Butterfly valve, Ball valve, Gate valve, Safety valves

We are mfgrs of all types industrial valves in any metal any size as per your project size 14" to 48" so sir send your enq to us

We are offering ball valve. Nu-tech steel ball valves are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of american petroleum institute standard api608 &api 6d.

• Material: Brass
• Size: 1/4" to 2"
• Valve Size: 1/4" to 2"
• Media: Gas, Water, Air
• Automatic Grade: Manual
• Lever Type: Handle
• Thread Type: BSP (F)
• Pipe Thread Size: 1/4" to 2"
• Number of Ways: 2 (in & out)
• Operation: Manual
• Thread: BSP
• No Of Ports: 2
• I Deal In: New Only

• Body Type:  Short Wafer (Sandwiched between Flanges)
•  Seat Type:  Integrally Moulded with the Body / Replaceble
•  End Connection:  Wafer Sandwiched
•  Pressure Rating:  PN 10 / PN 16
•  Operating  Temperature  Range:  -25°c to 200°c (Depending on MOC)
•  Seat Leakage:  Tight Shut off, Hand lever, Worm Gear Boxes
•  Operation:  Pneumatic Actuator, Electrical Actuator
•  Size Range:  40 NB to 600 NB

Low Cost / Quick Operation / Light & Compact : offers a complete line of resilient seated Butterfly Valves. ZARA’s "ZIV"brand rugged and reliable valves are built to last.   The body liner which also functions as the soft seat, comes in either a replaceable version or an integrally moulded version and offers 100% bi-directional sealing against vaccum to rated pressure of PN10 or PN16.    One unique feature is the international compability of our valves with most world flange standards hence one valve design can be used in many markets worldwide.

We bring forth quality certified Ball Valves the surface of which is treated with paints for corrosion resistance. The ball valve we offer is suitable for handling media like water and oil. It complies with the highest quality standards.

Design NU-TECH steel ball valves are designed and manufactured to provide maximum service life and dependability. All gate valves are full ported and meet the design requirements of American Petroleum Institute standard API608 &API 6D. British standard Bs5351 and generally, Conform to American Society of Mechanical Engineers standard ASME B16.34. Valves are available in a complete range of body/bonnet materials and trims.     Available Modifications Fon NU-Tech Valves Trim Changes End Connection Modifications Packing and Gasket Change Operator Mounting Handwheel, Extensions Pressure Equalizing Customer Specified Coatings Weld End Bore Changes Oxygen & Chlorine Clearing & Packaging   Operation Extended lever for easy operation. also available with gearing motor actuators, pneumatic or hydraulic actuators for more difficult services.   Body & Bonnet Split or 3-piece, split body & bonnet for 12" & small disassembles easily for repair component.   Bore Full bore or reduced bore. full-bore design provides exceptional flow control.   End Connections A choice of flanged, Rh flanged or butt welding end for piping flexibility.   Ranse of Materiamf Standard body/bonnet materials include nine grades of carbon, low alloy & stainless steels. For special applications they can be supplied in other grades of alloy & stainless steel. Threre's a full range of trim materials to match any service optional packing & gasket materials are available for a full range of service conditions.   Packing Std packing multiple V-teflon packing. combined with live loading, maintains packing compression under high-cycle and severe service applications. Graphite packing is used for high-temperature situation.   BPS Blow-out proof stem A pressure-safe stem shoulder design that protects against failure under excess pressure.   FS Fire safe designed to API607 or BS 6755 to grant their operation suitability in case of fire. Secondary metal-to- metal seal acts as backup if primary seal is destroyed by fire. Valves ordered for compliance with API607 will be provided with graphite packing and gaskets.

MANUFACTURING STANDARDS : AS PER BS 5351 FACE TO FACE AS PER ANSI B 16.10 ENDS : FLANGED END AS PER ANSI B 16.5 R.F & BUTTWELD AS PER ASME B 16.25 & SCREWED TO BSP/NPT TESTED AS PER BS 6755 AVAILABLE WITH LEVER , GEAR & PNEUMATIC ACTUATOR OPERATED SIZES AVAILABLE FROM 15mm TO 300mm

forged steel

Globe valves gate valves check valves forged steel butturfly steam traps ptfe lined valves plug valves flush bottom tank strainer.

Stainless Steel Check Valves

Wellworth engineering corporation is functioning as a successful manufacturer, wholesaler, retailer and trader of a diverse range of industrial valves and strainers. Our assortment of products is comprehensive including

nrv valves, Dual Plate Check Valves, Flange

Pipes, Pipes Fittings

Ball Valve, Foot Valves, Non Return Valves, PFA Lined Valves

Cups, Industrial Plates, jug

Ball Valve, Pressure Reducing Valves

Hdpe Pipes, high flow pipes, Pipes Fittings, pp pipes, PVC Rigid Pipes

forged carbon steel

stamped metal parts, machined plastic components, precision metal components