MF8 098090 Grouting Compound
34,000 Per Metric Ton
20 Metric Ton (MOQ)
G-GROUT MF-8 Inception - G- GROUT MF-8 is highly fluid,single component, cementitious grout pre packed . G-GROUT MF-8 powder It is manufactured by unique PSD technology to facilitate easy to inject and effective deep fine cracks,pores and voids. It has much finer particle size than other hydraulically setting materials. It is produced in state of art manufacturing plants in a controlled environment resulting in excellent filling quality. PurposeG- GROUT MF-8 is suitable for injecting and grouting in rock, soil, concrete and masonry and for filling joints, cracks and holes. ·MF-8 can be used at vertical and horizontal surfaces working. MF-8 is a ready-to-use dry-blend mortar based on cement modified with organic additives, which hardens without shrinkage when mixed with waterBenefits G-GROUT MF-8 can be injected with standard cement grouting equipment Compatible with most of the admixtures to accelerate / retard the setting time Supports all portions of structures Fill up the voids in concrete structure, control or prevent the structure from leakage or weak structures to strengthen Non-toxic, Non-Hazards Eco friendly & Cost Effective. Technical Specification Properties : G-Grout Value Consistency : Dry Powder Colour : Grey Methods of Uses Pre-processThe substrate must be cleaned down to load bearing grain structure. Before grouting the substrate is to be rinsed until it is saturated excess water will be removed. MixingMF-8 should be mixed with a slowly rotating mixer to avoid air pockets. First add 2/3 of the totally required water. After mixing for a short time add the balance of water. It should be mixed for approx. 6 minutes. Plastic consistency for vertical and overhead surfaces: 4 litres of water per 20 kg bag Liquid consistency for injection as per requirement.PackagingG-GROUT MF-8 is available in Bulk Jumbo bags with plastic inner liner. The product is also available in 25 kg plastic line bags.StorageG-GROUT MF-8 when stored correctly has an indefinite shelf life. Like cement, it must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo. Shelf life is at least 12 month in original packaging when stored in dry conditions between 15-25°C, protected from heat, frost and direct sunlight. SAFETY INFORMATION Extensive testing has shown G-GROUT MF-8 to be non-toxic and environmentally benign. No known significant health risks are associated with G-GROUT MF-8 but high con-centrations of dust may cause irritation. It is recommended that suitable protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice
CICO Polygrout Grouting Compound
4,620 Per Pack
10 Pack (MOQ)
Best Deals from Grouting Compounds
MYK Laticrete 1776 Grout Admix Plus 200 Ml Bottle
Get Price Quote
500 Kilogram (MOQ)
Fosroc Conbextra GP2
330 Per Bag
10 Bag (MOQ)
Conbextra GP2 Dry Powder
500 Per Pack
Conbextra GP2 is supplied as a ready to use dry powder. The addition of a controlled amount of clean water produces a free flowing, non-shrink grout for gap thicknesses up to 100mm. Conbextra GP2 is a blend of Portland cement, graded fillers and chemical additives which impart controlled expansion in the plastic state whilst minimising water demand. The low water demand ensures high early strength. The graded fillers are designed to assist uniform mixing and produce a consistent grout.UsesConbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc., It can also be used for anchoring a wide range of fixings. These include masts, anchor bolts and fence posts.Advantages Gaseous expansion system compensates for shrinkage and settlement in the plastic state No metallic iron content to cause staining Pre-packed material overcomes onsite batching variations Develops high early strength without the use of chlorides High ultimate strength ensure the durability of the hardened grout Free flow ensures high level of contact with load bearing Area
Cement Grouting Compound
13 Per Kilogram
1 Ton (MOQ)
Shrinkkomp 30
28 Per Kilogram
100 Kilogram (MOQ)
It is a Cementitious free flow grout having an ultimate strength of more than 70 MPa. It is highly suitable for all types of Dynamic Loads like Turbines, DG sets, Large Motors, Pumps, fans, Heavy steel structure foundation, Machine foundation and Building works. Grout is a composite material generally consisting of water, cement, and sand. It is typically used for filling voids under machines or other structural elements, sealing joints and openings in surfaces and reinforcing existing structures. GENERAL PROPERTIES Maximum Grain Size: 3 mm Water Required for Plastic Consistency: 14-15% Water Required for Flowable Consistency: 16-17% Packaging: 25 Kg HDPE Bags Delivery State: Dry Ready Stock of Shrinkkomp & Fosroc Conbextra GP2, Fosroc Renderoc
Expanding Grout
30 - 50 Per kg
2000 KG (MOQ)
Expanding Grout is a non-explosive demolition agent used for breaking rock and concrete. Also known as Expansive Demolition Grout, it is designed to provide job sites with non-explosive solutions for the demolition of rock and concrete in environmentally sensitive areas. Using a non-explosive product for rock and concrete breaking completely eliminates flyrock, noise, vibration from blasting, human discomfort and structural damage related to air blast overpressure. Compared with conventional concrete and rock breaking methods, Expanding Grout is safe, easy-to-use and cost-effective. It does not require heavy equipment, permits, or special certifications.
MIT-SE PLUS MORTAR FOR USE IN CONCRETE
Get Price Quote
0.0
View Profile
SilicoCrete TRG Premixed Mortar
Get Price Quote
20 Bag (MOQ)
Grouting Compound
Get Price Quote
1 Kilogram (MOQ)
K2 GROUT NSFF is a single pack, ready to use, ultra high strength, free flow, & non-shrink grout. K2 GROUT NSFF is a blend of specially processed cement and special fillers free from corrosive substances and additives. K2 GROUT NSFF is supplied as ready to use grout requiring addition of precise quantity of water at site (4 to 4.5 litre/ 25kg. grout). K2 GROUT NSFF is suitable for gap widths between 10mm - 50mm of thickness. In excess of 50mm gap, cleaned washed 10mm aggregates can be incorporated at the rate of 50% - 100% of the quantity of grout used.
0.0
View Profile
Grout Powder
Get Price Quote
1 Container (MOQ)
Product Strengths: Can be diluted in water in any ratio Suitable for use with compact and porous materials Suitable for delicate marbles No toxic substances released
Grouting Compounds
Get Price Quote
India's Firt ISI Marked Tile/Stone Grout
0.0
View Profile
Cold Mix Bitumen Compound
Get Price Quote
100 Litre (MOQ)
Grouting Compounds
Get Price Quote
1 Metric Ton (MOQ)
We are offering grouts & grouting compound. Cico grout gp non-shrink general purpose cementitious grout. Features controlled expansion, to ensure positive surface contact no rusting or stain on exposed edges premixed, only addition of water needed contains no calcium chloride usage anchoring of bolts, base plate grouting under foundations normal curing should carried out in the vicinity of application compression strength method of application measured quantity of water, about 15-17% by weight of powder, and grout powder should be thoroughly mixed for 5 minutes to get free flow grout.plastic grout can be obtained with lesser water. Yield 1900-2100 of dry powder grout mix per cubic meter of grout. Pack size : 25kg bag shelf life : 12 months
0.0
View Profile
Hawks GP 2 Grouting Compound
Get Price Quote
1 Piece (MOQ)
HAWKS FLOOR HARD NM is a pre-mixed emery based dry shake floor hardener which contains graded high-quality Emery/quarts aggregates, Portland cement and special additives. The emery/quarts aggregate used are have excellent hardness and are chemically inert. This resist polishing and provides a non-slip skid resistant surface even in wet condition. Being non-metallic, it will not rust. HAWKS FLOOR HARD NM is available in natural grey color but special color can be. Product Benefits Forms a monolithic floor topping on concrete floors. Provides an extremely strong, hardwearing, abrasion resistant and impact resistant surface. Resistant to oils and greases. Non-rusting. Excellent non-slip properties.
0.0
View Profile
Grouting Compounds
Get Price Quote
The company started manufacturing EPE products in 1999 for primary packaging of high value products & a modified version of this found lots of applications in Civil Engineering & Construction, which led to manufacturing of Filler Boards & Back up Rods for expansion joints. These products were designed & developed to over come all the short coming of bitumen impregnated boards & to support all types of hot & cold pour sealants. Further improvement led to replacement of Tar- Impregnated filler boards. These products are manufactured to international specifications, MOST & IRC. Today the company is the market leader supplying filler board & back up material to majority of NHAI & Airport projects. In order to exploit the increased thrust given to NHAI projects, the company started designing and manufacturing Concrete Cutting Machines. The first machine was manufactured and used in Manhar (NH8- L&T) Toll Plaza project.
0.0
View Profile
Marble Mastic Grouts
Get Price Quote
Payment Terms Cheque, Others Supply Ability As per requirement Per Month Sample Available Yes Sample Policy Free samples are available Packaging Details Standard Packaging Main Export Market(s) Australia, Central America, North America, South America, Eastern Europe, Western Europe, Middle East, Africa Main Domestic Market All India Certifications An ISO 9001:2008 Certified company
0.0
View Profile
Marble Mastic Grouts
Get Price Quote
Water Proof Grout, Waterproofing Chemical, Concrete Repair Mortar
Marble Mastic Grouts
Get Price Quote
Water Resistant Grout Compound, concrete bonding agent, floor adhesive
0.0
View Profile
Post Free Ad
