Boring Pump Dealers

Flow rate:upto 11660 m3h Head: upto 225 m Motor power: 2.2 to 2000 kW Outlet diameter of pump 80-800mm Working temperature < 105 ° C Solid grain < 80 mgL The pumps are non-self-priming, centrifugal volute pumps with radial inlet and radial outlet ports and horizontal shaft. The rotating assembly is dynamically balanced. Impellers are hydraulically balanced.

Boring pump Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt losshourt ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Graded Cast Iron and Dynamically Balanced, BALL BEARING : Reputed Make ZZ Ball Bearing.

A domestic Boring pump is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the water in deep well ranging from 200 feet depth to 1200 feet to pump the water to surface.

Our Stainless Steel Bore Well Submersible Pumps are equipped with an advanced electric motor. These pumps are ideal for general submersible water applications such as able to drain infiltrating water, cellars to reservoirs, clean or slightly dirty water and for garden irrigation.

• Brand Name: Texmo
• Type: Borewell
• Voltage: 220 V
• Material: Stainless Steel
• Country of Origin: Made in India
• Motor Horsepower: 5 HP
• Usage/Application: Pumping water
• Motor Phase: Single Phase
• Power Source: AC Powered
• Warranty: 12 months
• Frequency: 50 Hz

• Phase: Single
• Head in Meter: 4 to 113
• Discharge in LPM: 15 to 85
• H.P.: 0.5 to 1.5
• Stage: 6 to 25

V-3 3" Bore well Submersible Water Filled Pump sets with S.S. Body suitable for 78 mm Bore Dia in Single Phase - 220 Volts - 50 Hz   Our provided submersible pump is precisely designed to be utilized in 3 inch dia wells or larger. In sync with the quality standards, the offered pump is manufactured using quality approved basic material and high-end technology. Provided submersible pump is highly acclaimed by our esteemed clients, owing to its various quality features and cost-effectiveness.Features:  Rigid construction Easy maintenance Corrosion resistance

• Adopter: Cast Iron
• Stage Casing: Cast Iron
• Impeller: SS 410
• Pump Shaft: SS 410
• NRV: Cast Iron
• Sleeve: SS 410
• Bearing Bush: Nitrile Rubber / LTB – 4
• Couple: SS 410
• Strainer: SS 202
• Fasteners: SS 410 / SS 202
• Upper Housing / Connecting Piece: Cast Iron
• Lower Housing: Cast Iron
• Motor Base: Cast Iron
• Rotor Shaft: SS 410 / SS 420
• Stator Tube: SS 202
• Thrust Bearing: SS 420
• Revolving plate: Carbon / Teflon
• Diaphragm: Nitrile Rubber
• Oil Seal: Nitrile Rubber & SS
• Fasteners: SS 410 / SS 202

• Power: 3hp to 7.5hp (5.5kw)
• Motor: 140mm dia motor 3 hp to 7.5hp Three phase 415 Volts
• Head Range: up to 407 meters Pumps 100mm (4”) submersible pump
• Head: up to 407 meters (1330 feet)
• Discharge: up 540 LPM

Bore well COMBO submersible pump for 6” (150mm) bore well. Applicable for deep bore wells ( 500 to 1330 feet) with low water yield. When  Compared to a regular  6”(150mm) bore well pumps , for a 1000 feet depth, HP  required for a 6” bore well pump is  minimum12.5hp( minimum water   discharge is 110 LPM). But when the yield in the bore well is less than 70 LPM, this combo pump requires only 5 hp   FEATURES: Pump designed and constructed with casing tube and with tie bolt to arrest whirling effect and thus increase the life of the pump. With low power, high head is achieved. 3hp -235 meters , 5hp-370 mts, 6hp-407 meters. Thus suitable for low yielding bore wells . Existing V6 motors can be used . Standardized spares engineered to perfection makes this pump a world class pump APPLICATIONS: For pumping water from deep bore wells A regular 6” Bore well motor can be used as prime mover A low discharge 6” pump of 5hp can be used max up to a depth of 450 feet. But this combo pump of 5hp can used for a depth of 1300 feet. Thus savings in cost and power Existing 6” motor can be used with this pump

Salient Features Motor Motor construction in integral locking method for easy servicing Copper rotor for better connectivity International NEMA standard spline coupling to enable inter-changeability Carbon thrust bearing for less friction and better efficiency even at low voltage field conditions Reinforced motor design to withstand wide voltage fluctuations Pump To ensure pump stability and perfect alignment, an additional protection is provided in the pump portion Sand guard provision in both lower and upper portion of the pump SS insert in all noryl diffusers for wear & tear resistance even in sandy bore wells NRV to avoid water hammering effect to the pump Application Domestic and Minor Irrigation Residential Complexes and high rise Buildings Drip and Sprinkler Irrigation Fountains and Special

• Light weight and easy to install: Stainless steel pump shell for corrosion resistance and LTB bushes for high wear resistance and longer life
• Improved hydraulic design with increased efficiency and reduced power consumption: Built in NRV with minimum friction
• Noise free operations.: Easily rewindable Squirrel-cage motor of water-cooled, designedfor 200 – 240 V, 50 Hz, AC power supply
• Modular construction and easily interchangeable parts: High quality water-resistant polymer insulated wires for longer life even under adverse voltage conditions
• Available in radial flow impeller design in shell type assembly: Pressure diaphragm to compensate excess pressure due to heating up of filled water
• Impellers and diffusers of high quality engineering polymer:  

Applications Domestic & Community Water Supply Bore well applications in agriculture and irrigation Drip and Sprinkler Irrigation Housing Complex, Bungalows High Raise Buildings

Applications   Domestic & Community Water Supply Bore well applications in agriculture and irrigation Drip and Sprinkler Irrigation Housing Complex, Bungalows High Raise Buildings  

We are the largest manufacturers, exporters, and suppliers of Multistage Turbine Bore Pumps from New Delhi, India. Our team of skilled experts manufacturers the Multistage Turbine Bore Pumps as per the defined industrial standards and norms. We guarantee high-performance, and durable products that can be availed at market leading prices. We are appreciated in the market for offering high quality Multistage Turbine Bore Pumps in promised technical specifications and sizes, and we provide uninterrupted services to our esteemed clients.

• Material: Cast Iron, SS
• Diameter: 40-80 mm
• Motor Power: 0.5-60 HP, 0.31-45 KW
• Deep well ranging from: 200 feet depth to 1200 feet

• Type: Borewell
• Motor Phase: Three Phase
• Brand: Akash

• Head range: 10.2 - 405 m

The motor portion is a squirrel cage wet type water cooled induction motor with stainless steel stator shell to prevent rust formation. Specially designed thrust bearing is provided for long life. Available in 3, 4, 5, 6 and 8 inch sizes.

• Type: Submersible Well Pump
• Application: Industrial
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warrenty: 1 Year, 2 Years

A Latteys Brand Bore well submersible pump is vertical multistage centrifugal pump closely coupled to an oil filled and cooled vertical ac single/three phase induction motor.A Latteys Brand Bore well submersible pumps are manufactured as per IS: 8034 Standard. As this unit is completely submerged in water, cavitation is totally avoided.     Feature :   Dynamically balanced rotor Totally enclosed,Oil filled, squirrel cage induction motor Food graded non conducted power oil CSR starting method for AC supply Stainless steel stator body Corrosion and abrasion resistant parts are made of stainless steel, high strength   engineering polymers and special alloy materials   Better slim design – Better Efficiency – Low power consumption Light weight – Ease in installation Silent running Reliable in operation     Applications :   Irrigation and Drip Irrigation Sprinkler, Gardening, Nursery and Bungalows High rise buildings & complexes Industrial water supply schemes Swimming pool, hospitals