Latex Adhesives Dealers in Alwar

• Brand Name: Virsun
• Color: White
• Packaging Size: 20 Ltr
• Storing Temperature (deg. Celsius): >32
• Bond strength: Greater than ANSI A118.4 requirements
• Shelf Life: 2 Years if properly stored

Virsun S-1198 Crete Admix is specially designed latex additive for use with Virsun Crete Filler Powder to make high strength latex thin-set adhesive. The Adhesive made with Virsun 1198 Is suitable for Installing all types of ceramic tile, Vitrified tile, natural stone, and agglomerates. Also for use with Portland cement to make slurry bond coats for mortar beds to give the Improved performance and longer open time. To achieve longer open time under tropical or desert conditions, installation recommendations. Application Used for installation of all types of cc tile, VBrBed tile, brick. natural stone and agglomerates S-1198 Latex admix offers the speed and economy of Portland cement based adhesives with permanent, water-resistant dependability.Advantages: Superior shear bond strength - greater than ANSI A118.4 requirements. Suff able Substrates Concrete Cement Terrazzo Brick Masonry Cement Plaster Concrete Masonry Cement Backer Board" Cement Mortar Beds Ceramic Tile and Stone Gypsum Wallboard (Interior Only) 'Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.   Coverage : Coverage Approximately 200 sft per 20 liter using a 1/4' x 1/4 Degree (6mm x 6mm) notched trowel Coverage will vary depending on trowel notch size, type and size of the and substrate Shelf Life Factory sealed containers of this product are guaranteed to be of first quality for two (2)years If stored indoors and off the ground at temperatures >32 DegreeF (0 DegreeC).