Water Leak Detection System Dealers

• Material: Plastic
• Color: Black
• Condition: New
• Application: Water Leak Detection
• Feature: Hard Structure, Less Maintenance
• Type: Water Leak Detection System
• Country of Origin: India

Rodent Repeller is an electronic device that uses the principle of intense high frequency sound waves (well above the 20khz frequency which is the upper limit of the hearing range of the human ear) to drive away RODENTS. Rodents usually leave the area being protected by ultrasound & they do not get killed. The Whole system will accordingly cover an open area of approximately 3600 sq.ft and if installed in the false ceilings and the false floorings, the area covered will be considerably less.   Water Leak Detection System Water Leak Detector System offers an effective environment monitoring solution for problems associated with water leak in server, data and computer rooms. The ultra compact device with its intelligent sensor cables monitor, detect and communicate the presence of liquid via audio - visual alarms to the server administrators. Its user friendly software offers the technicians unsurpassed flexibility in navigation and damage control.

• Type: Water Leak Detection

We are offering a wide range of Water Leak Detection System.

• 1.with sensor cable maximum length :500m: 2.Power supply:12VDC,3W

We are offering water leak detection system. Hestia detection are leaders in providing environmental protection for water leak detection, oil leak detection and temperature monitoring. We offer a wide range of systems for both commercial and domestic environments. As an experienced manufacturer, supplier and with a range of services for installation, maintenance and commissioning, we are proud of our reputation to respond quickly to provide the right systems for you

We are providing a various types of products such as Water Leak Detection System Water Leak Detection Panel provides round the clock protection against unwanted water leakage with the help of water detection cable like SONTAY The water leak detection cable will be placed in distributed locations inside server room/Data Centers. These will be mounted on floors with provision to adjust the sensing of thin film of water. Each Cable is wired to the control panel. In the control panel, the water leak from each cable is monitored and in case of detection from any cable, an alarm is initiated. This alarm will be on as long as the water leak present across the cable. The water leak detection cable detect continuous presence of water across the cable. It detects leaks like condensate water overflow, chiller water leaks, plumbing line cracks, heating/cooling piping leaks, outside seepage & more before damage and downtime occurs.  

• Configuration: Control Panel with optional ( 2 to 8) zones
• Operating Voltage: 230V AC 50 Hz
• Dimension: 305 x 225 x 85 mm
• Weight: 2.5 Kgs
• Mounting: Wall
• Sensor Leader Cables: 5 mts
• Sensor Cable length: 10, 15, 20 and 25 mts

Features : The Controller has in built software to sense, receive and recognize the signals sent by the sensor cables In the event of any abnormal condition or malfunction it activates an alarm that has to be acknowledged physically and reset In built connectors are provided for interfacing the hooters and RS 485 Has optional 2 to 8 zones (areas) adaptability Software for monitoring and report generation. Events logging It needs a power connection and comes equipped with a 3-pin power supply cord Display 4 x 20 LCD for displaying status of all water leakage sensors, Door status LED Display status for all zones Sensor Cables Reliably senses any conductive fluid Pressure on the cables will not create any false alarm Non conductive and abrasion resistant polymers increase the strength of the cables Flexible and easy to maintain Detects fluid along the entire length

• Material: Metal
• Condition: New
• Application: Water Leak Detection
• Feature: Durable, Hard Structure

  Conventional touchscreen water leak detection panel 10.1’ Touch screen display From 2 zones to upto 16 zones with a built-in module Zone addressing which enables the user to name the zones as per site condition The panel continuously displays status of all zones Zone sensitivity feature is provided which enables the user to set the sensitivity of sensing cables as per the site requirements Zone Isolation Event log of upto 500 events with date & time Cable fault in case of water leak cable break Input to water leak cable is an isolated AC supply Modbus / Bacnet IP output Common alarm, zone wise alarm and common fault potential-free relay output NEMA 4X IP65 enclosure In-built battery charger CE certified  

• Operating Voltage: 230V AC 50 Hz
• Dimension: 305 x 225 x 85 mm
• Weight: 2.5 Kgs
• Mounting: Wall mount
• Leader cable: 5 mts
• Sensor Cable length: 10, 15, 20 and 25 mts

• Type: Water Leak Detection System
• Material: All
• Application: Water Leak Detection, All
• Color: All
• Feature: All
• Voltage: All
• Condition: New
• Finishing: All
• Power: All
• Coverage Area: All
• Country of Origin: All
• Size: All
• Brand Name: All
• Certification: All
• Length: Depends On Requirement
• Pressure: Depends On Brands
• After-Sales Service Provided: Yes
• Current: NA
• Media: NA
• Temperature Of Media: NA
• Product Name: Water Leak Detection System

Water leak detection system provides around-the-clock protection against flooding in your home due to plumbing failures, leaking hot water heaters, burst washer hoses, failed dishwasher seals, etc. The Water leak detection system automatically turns off the home's water supply instantly upon detection of a water leak thereby protecting your home and belongings from costly water damage.

• Display Type: Analog, Digital
• Measurement Range: 600 metres

We are the leading manufacturers, exporters and supplier of this products.

One the most advanced solutions on the market, the System sounds an alarm in the unlikely event of a water leakage in the under floor and also points out the exact location of the leak. The system is extremely robust and even in the event of a sensing cable break the remaining cable works normally indentifying leaks if any. Digital & Alarm Units   The FG-SYS digital unit is designed to be used with TTK digital liquid sensing cables FG-EC, FG-ECS (with FG-DTCS box), FG-AC and FG-HC2. The presence of a liquid on the sensing cable activates a luminous and audible alarm, displays the localization of the initial point of the leak to the nearest metre. The FG-SYS digital unit can control from 1 to 120 lengths of sensing cables independently and indicate for each one the type of defect. FG-SYS is able to be used with TTK digital liquid sensing cables: FG-EC, FG-AC and FG-HC2, FG-ECS (combien with FG-DTCS). Each length of sensing cable or digital sensor can be programmed and gives a specific designation of the room or floor inherent to each installation. In the event of a leak, an audible alarm is triggered, the zone indicator light changes to red, the dry contact is activated and the display shows the time, date the fault starts, type of fault (leak or circuit interruption), zone designation and distance in metres from the origin of the leak. FG-SYS digital unit is totally compatible with existing operating systems. There are eight, entirely configurable dry contacts available, RS232 and RS485 serial links with MODBUS communication protocol for interfacing with executive, and streamline printing. These are the communication tools which enable the users to use all detection and alarm information in the best possible manner.

The assests like Data Centre, Server Room, Document Room, etc are the core assests of the Corporates and Banks. First periority is its safety and smooth running, so that other operations will not get affected. To ensure these assests safety one need install the Access Control, Fire Alarm, Rodent Repellent system in that line Water Leak Detection System is also very important for preventing the water leakage. The presence of water can mean damages to equipment or a loss of critical services, especially electrical. Thus Water Detection System is useful for early detection where preventive action should be taken. Kambar Technologies delivers practical solutions that detects early water leakage and sends alert notifcation through sirenhooter and autodialer. Our technology to ensures that even the smallest leaks are detected and located before a big disaster. How it works Water leak detection system is comprised of 3 primary components: a water leak detector cable, the cable itself a sensor, a sensor interface module which will be placed in particular area itself, and a Main Control Panel which connected to SirenHooter and autodialer. In simple terms, if any one of the system's sensors detects water, it will send a signal to the control panel which in turn arm the sirenhooter and trigger the autodialer. The whole process occurs within a couple of seconds. With the timely intimation, a potential disaster has been averted, saving the devastation, expense, and headaches of flood damage and insurance claims.

The WD-x range is designed to detect water leaks either at localised points using the WD-PS point sensor or larger areas with the WD-CS cable sensor, a rain sensor is also available. All these sensors are used with the WD-AMX range of modules that are suitable for DIN-rail mounting inside AHUs, power distribution units or general areas where leak detection is required. They are fitted as standard with LED indication of the water leak status, and sounder that can be disabled by simply removing a jumper. The WD-AMX relay output can either configured to be manual or auto reset. A relay output provides an alarm signal that can be used for connection to a BMS controller or remote alarm annunciation panel such as the UI-AA1-F WD-CS is easy to lay and detects along its entire length More than one WD-PS can be connected to a WD-AMX Self-contained heater to avoid nuisance alarms on WD-RS

Water leak detection system is the best water leak system in India. as you know if water leaks in at wrong place at the wrong time can damage a business in a big way and can harm to your past business record, effect your current business operation. It seems like an insignificant problem can cost too much, it comes to lost computer data, damaged files, down Time Watch India Water leak detection has become popular on the list of priorities for many companies and industries. Time watch India Water leak detection system’s cable itself is the sensor. Every centimetre of rugged, fire rated cable is sensitive to water and when water comes into contact with the cable, even a few millilitres, this water leak system is able to detect the leak and report the location.

ater detection alarm is used in a wide range of applications; from computer rooms to mechanical rooms,anywhere undetected leakage can occur, to guard against undetected water leakage it is installed below Access Flooring (computer rooms, data centres)In Water leak detection system ultra flexible embedded gold plated nickel sensors Cable is used that contains an end-of-line, t

Water – in the right place – is our most important commodity but water leaks, in the wrong place at the wrong time can damage a business in a big way. What seems like an insignificant problem can cost millions when it comes to lost computer data, downed telecommunications switches, damaged files, ruined works of art, or water-soaked rare books. Personnel safety can be threatened by roof leaks in buildings, or by fire from water-caused electrical short circuits. “

Water Leak detection system for critical rooms like datacenter,server room,hub room.