Apex Industrial Electronics Ambala Cantt, HR

Our dental Wire Cutter has a very sleek design and is very light weight which ensures a better hold of cutter in hand. Our orthodontic wire cutter is made up of special grade alloy steel which is excellent for sharp cutting edge and a long life. We have gained a lot of recognition and are known as a prominent wire cutter manufacturer and supplier in India. A very light weight and sleek design for better holding of cutter in the hand. Made of special grade alloy steel for sharp cutting edge and long life. Used for cutting wire above 21 Gauge.

Construction The inner and outer chamber is made of high-grade stainless steel sheet (SS-304); the strong and sturdy lid is also made of high grade stainless steel plate. (SS-304) The unit is fitted with very efficient radial locking system made of stainless steel bars (ss-304), steel, chrome plated, with paddle lifting device. Supplied complete with stainless steel basket. The unit is fitted with safety valve, pressure release valve, water level indicator, cord and plug. To operate on 220 /230 Volts, 50Hz AC supply. Documentation Supplied complete with operation protocol, installation protocol and design qualification certificates along with the necessary hydro test certificates and other calibration certificates. Mode of Heating Electrically heated by special flange type / immersion type heaters bearing ISI mark, to operate on 220 /230 Volts, 50Hz AC supply Working Pressure The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g ( 15 psi - 17 psi ) Working Temperature : 121° C Hydrotest Pressure : 2.5 kgf/cm sq.g ( 35 psi )

APEX is a name of quality and quick service, an asset to Hospitals, Pharmaceutical, Tissue culture, Bio-fertilizer Laboratories and research instituses with modest sterilizing needs, where lcontaminated objects require sterilization. Since last 25 years APEX have made its primary objectives to help fight the spread of infections, caused by pathogenic micro-organisms. We represent most innovative and advanced technologies in our products supported by our most efficient customer support network. Construction The outer chamber is made of thick gauge Mild Steel while inner is made of 304 grade Stainless Steel. Lid is made of Mild Steel with inside lined with S.S. for double protection. The unit has Radial Locking arrangement for the lid. Provided with built-in safety valve, pressure guage, pressure release valve. Pressure is adjustable from 5 psi to 20 psi ± 3 psi. Supplied complete with cord, plug etc. To operate 220 volts single phase 50 cycles. Mode of Heating Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 220 volts single phase 50 cycles Working Pressure The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g ( 15 psi - 17 psi ) Working Temperature : 121° C Hydrotest Pressure : 2.5 kgf/cm sq.g (35 psi)

Introduction APEX is a name of quality and quick service, an asset to Hospitals, Pharmaceutical, Tissue culture, Bio-fertilizer Laboratories and research instituses with modest sterilizing needs, where lcontaminated objects require sterilization. Since last 25 years APEX have made its primary objectives to help fight the spread of infections, caused by pathogenic micro-organisms. We represent most innovative and advanced technologies in our products supported by our most efficient customer support network. Construction The inner and outer chamber is made of high-grade stainless steel sheet; the strong and sturdy sheet lid is also made of high grade stainless steel sheet. The unit is fitted with very efficient radial locking system made of mild steel, chrome plated, with paddle lifting device. Supplied complete with stainless steel basket. The unit is fitted with safety valve, pressure release valve, water level indicator, cord and plug. Mode of Heating Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 220 volts single phase 50 cycles Working Pressure The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g ( 15 psi - 17 psi ) Working Temperature : 121° C Hydrotest Pressure : 2.5 kgf/cm sq.g ( 35 psi )

Our Vapor Sterilizer is transparent, light weight, corrosion proof and is made up of polymer of light grade. Our water vapor sterilizer is also incorporated with two trays which ensure 100% sterilization. Our vapor sterilizers are highly famous and we are a well known vapor sterilizer manufacturer and supplier in India. Light Weight, transparent, corrosion proof made of light grade polymer with two trays to ensure 100% sterilization. For best results, it is recommended to clean the instrument thoroughly before arranging it suitable in tray. Eight to ten formalin tablets should be kept exposed in the cabinet for overnight vapour saturation. Subsequently, only twenty to sixty minutes of exposure will be required to ensure sterilization. It is available in two sizes.

We offer one of the best quality Ultraviolet Chambers which are highly effective in its operation. Our UV curing chamber is highly famous and is highly demanded by all. Our chambers are quite cost effective and we are known as a reliable UV chamber manufacturer and supplier in India. Compact elegant cabinet. 12 Stainless steel trays can be kept in the cabinet. It is so designed that ultra rays passes through all the trays in uniform condition. U.V. rays destroy bacteria and micro-organisms with in 3 to 5 minutes. U.V. cabinet can also be used to preserve sterile instruments in "ready to use" condition. Built with safety device protects accidental radiation exposure. Total power consumption 15 W. Design to work on AC 220V/50Hz.

Construction Triple walled construction, all the three walls are made of thick high grade stainless steel sheet of SS-304 grade. The lid is made of stainless steel sheet. The unit is fitted with radial locking system with paddle lifting device, made of MS chrome plated. Provided with built- in safety valve, pressure gauge, pressure release valve and water level indicator. The pressure is adjustable from 5 psi to 20 psi with automatic pressure control switch, which controls the pressure with an accuracy of +/- 1 psi. Supplied complete with stainless steel basket, chord and plug. Mode of Heating Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 220 volts single phase 50 cycles Working Pressure The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g ( 15 psi - 17 psi ) Working Temperature : 121° C Hydrotest Pressure : 2.5 kgf/cm sq.g ( 35 psi )

Our Three Way Syringe is made up of copper and brass. Our dental three way syringe doesn̢۪t get hard and doesn̢۪t wear with time. We also supply our syringes at quite reasonable prices foe everyone to avail them easily. We have gained the position of a prominent three way syringe manufacturer in India. Made of brass and copper. Sealing O-rings are made of silicon rubber to provide better proofing against leakage and for air and water. Also these O-rings does̢۪t wear with time and get hard. For better sale after service, there are only two sizes of -rings used.

An extremely versatile apparatus for incinerating the injecting needles and to cut the syringe, used in medical, dental surgery and surgical clinic. Health units, any where needles represent a likely risk of inflection. The units in housed in an elegant casing and is a highly functional. Very efficient in operation.

Very convenient to destroy contaminated disposable syringe and needle-electrically operated on AC 220V

Our Sandblaster System is one of the best and is highly efficient in its working. Our air sandblaster system also helps achieve a pollution free atmosphere through its applications. We offer our sandblaster system for very genuine prices and we have placed ourselves as a leading sandblast system manufacturer and supplier in India. Sand Blaster measures 10 x 13 x 14 inches with rubber gloves for abrasion free working on casting with high quality nozzle for contamination free smooth finish of articles built in light and exhaust filter for pollution free atmosphere, large glass window for easy viewing.

Our Rectangular Autoclave is highly famous and is highly demanded by all. We supply our premium quality horizontal rectangular autoclave at one of the most affordable prices for everyone to avail them easily. We have also gained the position one of the preferred rectangular autoclave suppliers in India. Construction The unit has inner Chamber, Boiler, Lid and Jacket - all made of 304 grade stainless Steel, outer chamber of thick gauge mild steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. It is supplied complete with vacuum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular stand. It is available in the following standard sizes. Operatable on 3 Phase, 440 Volts A.C. Supply. Mode of Heating Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 440 volts three phase 50 cycles. Working Pressure The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g (15 psi - 17 psi) Working Temperature : 121° C Hydrotest Pressure :

Our Portable Autoclave is made up of three walls and the three walls are made of high grade stainless steel sheet. We supply laboratory portable autoclave and dental portable autoclave as well. We have also gained the position of a reliable laboratory portable autoclave manufacturer and supplier India. Triple walled construction, all the three walls are made of thick high grade stainless steel sheet of SS-304 grade. The lid is made of stainless steel sheet. The unit is fitted with radial locking system with paddle lifting device, made of MS chrome plated. Provided with built- in safety valve, pressure gauge, pressure release valve and water level indicator. The pressure is adjustable from 5 psi to 20 psi with automatic pressure control switch, which controls the pressure with an accuracy of +/- 1 psi. Supplied complete with stainless steel basket, chord and plug. Mode of Heating Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 220 volts single phase 50 cycles. Size 12" x 12" Aluminium / Stainless Steel12" x 14" Stainless Steel

Made of Non-magnetic Stainless steel. These are specially designed to hold the tiniest article and to provide better grip on the jaws. Life time guarantee against rust. Made of Stainless Steel. Band Holding Tweezers Model - GDOT-203 Bracket Holding Tweezers Model - GDOT-204

Made of special grade stainless steel. The jaws are hardened to provide better life to pliers. Available in different shapes. Available in plastic sleeve on handles to provide better grip.

We are one of the leading Micro Motor System manufacturers in India. Our micro motor system is of high optimum quality and is highly demanded by all. Our portable micro motor system can also be availed at one of the most reasonable prices and well within the stipulated time avoiding all delays. Control unit for Micro Motor, Suitable for all type of micro motor. Consists of Speed control box, Foot switch and Stand for micro motor hand piece. Forward and reverse direction selection. Speed of the motor can be controlled by hand or by foot. Maximum output is 35,000 R.P.M. Overload protection for motor safety.

Our dental Instrument Cassette is designed to protect valuable equipments and instruments while doing autoclave. Our instrument cassette is specially designed for hand instruments and is made up of non magnetic stainless steel and soft silicon rubber comprises of the inner lining. Our company is highly known for its quality and is a well known orthodontic instrument cassette manufacturer in India. These cassettes are designed for the safety of the valuable instruments and the equipments while doing the autoclave. The body of the cassettes is made of non-meganetic stainless steel and the inner lining are made of soft silicon rubber. The silicon rubber does not wear and remains soft. The silicon rubber pads are provided to avoid the damage of instruments while handling and storing. This is specially designed for autoclaving of hand instruments. The instruments can be placed on each side of the cassettes. In total 14 number of instruments can be autoclaved at one time. Overall size of the cassettes 17.5 x 12.5 x 5 cm.

This is good for us that people are getting aware with the proper use of sterilizers that is why you can easily find some new and latest model of sterilizers one is Hot Air Sterilizers it acts to prevent the spread of infectious diseases. With this vision we have evolved an exclusive range of hot air sterilizers and hot air lab sterilizer. These are designed for the ease of doctors and delivered to various clinics/hospitals. The recent years have brought about an increased awareness as to the absolute necessity of STERILIZATION to prevent the spread of infectious diseases. This has forced Health Care Professionals to take extra measures of ensuring total destruction of bacteria, virus, fungi, etc., on medical/dental/surgical instruments. With this in mind, we have developed air sterilizer equipment to sterilize a variety of items needed in Clinics/ Hospitals. Sterilization is achieved by application of dry heat with temperatures ranging from 50 to 200°C. A range of items, including instruments and glasswares, can be sterilized effectively 'HOT AIR STERILIZER' is easy to use - Just set the temperature and time to desired range. The temperature is controlled with an accuracy of ± 1°C by an Electronic Temperature Controller.

We can easily reorganize the quality conscious thoughts of our clients who pay more attention towards quality rather than price tags. Here we present a specially designed range of Handpiece Cassette which is used in autoclaving operations. Most of the time the hand piece gets damaged during the autoclaving operations, but here cassette prevents it from sudden damage. It has designed silicon pad which holds the hand piece in appropriate manner. It̢۪s overall dimension is 15 x 10 x 5 cm. A range of hand instruments made of special grade of stainless steel. A special type of surface treatment is given to rule out feasibility of rust.This is specially designed for autoclaving of hand Pieces (Micromoter Hand Piece, Air Rotor Hand Piece/Fiber Optic Hand Piece). Generally the hand piece get damaged in handling during autoclaving operation. And it causes lot of repair cost to the hand pieces. This cassette takes care of this problem. The specially designed silicon pad holds the hand piece properly and avoids the damage to the hand piece. You can also put your tips of ultrasonic scaler etc in it.

We supply and manufacturer an elite range of medical products consist of Gum Scissors, dental gum scissors and surgical gum scissors in which quality level has been fully maintained. These are made up of stainless steel and their blades are sharpened and hardened. In addition, for meeting the urgent requirements of the clients, we have a well equipped infrastructural facility that helps in completion of consignments within the stipulated time. Made of Stainless Steel. The blades are specially hardened and sharpened. Available in Straight and Curved cutting blades.

Light in weight, portable and require less maintenance, we offer you a phenomenal range of Glass Bead Sterilizers and glass sterilizer which are designed in order to meet the necessities of hospitals and clinics. These are available in different models and can be availed in tailored solutions. These models are designed for the suit of various industries like medical, dental, laboratory, and biotechnology etc. Subsequently, we are the renowned suppliers in India and easily approachable for wholesale sterilizers at market leading prices. GLASS BEAD STERILIZERS are a Quick, Easy and Accurate alternative to traditional methods of sterilization. Once switched 'ON', the units are ready to use within 30 Minutes and ensure total sterilization by destruction of all Micro - Organisms within seconds. Various Models of GLASS BEAD STERILIZERS have been introduced and are being used in the Medical, Dental, Laboratory and Biotechnology / Tissue Culture, Podiatric professionals for the past 10 years. Over the years, apart from the domestic market, an overseas market has also been identified and the units have been exported to several countries including Australia, Sri Lanka, Hungary, Spain and U.S.A. Our GLASS BEAD STERILIZERS are incorporated with an imported thermostat, which maintains the set temperature with an accuracy of ± 1% of the preset range. These units, having a stainless steel body, are compact enough to be placed on any Laminar Air Flow Work benches or any other workside tables in a clean room atmosphere.

Description : 300 Watt, Rpm-10000 with 5 Speed Foot Controller & High Speed 2 Ball Bearings Flexible Metal Cable Arm.

Description : 400 Watt, Rating 60 Min, Rpm-18000 with Rectangular 5 Speed Foot Controller. Equipped with High Speed 4 Ball Bearings Flexible Metal Cable Arm.

As we are catering our product range to medical sector so it is obvious for us to deliver hazard free and only safe products which should be high in their performance. And we are doing the same only we are providing well furnished range of Endo Box, autoclavable endo box and steel endo box which are made up of the best quality raw material which ensures the error free products Apex Industrial Electronics only. Made of Aluminium, Stainless Steel & Special Grade PlasticAutoClavable, also suitable for chemical spsterilizationSuitable for 45 nos. of Instruments