Portable Autoclave Sterilizer
2,200 Per Piece
1 Piece(s) (MOQ)
Autoclave Sterilizer
Get Price Quote
We are technically proficient in designing and developing high performing Autoclave Sterilizer. Based on advanced technology, Autoclave Sterilizer is widely used for sterilization procedure in laboratory and pharmaceutical industry. The principal of saturate steam sterilization with electricity heated. The better used in rubber, utensil, linen, plastic, dressing material, surgical item and glassware etc. The sturdy constructed double wall inner chamber boiler made out of SS 304 and outer is made of thick mild steel duly paint finishing. The boiler and outer shell is provided with air insulation. The lid is made out of thick mild steel duly collided with stainless steel. The lid is tightened by radial locking system with neoprene gasket to avoid risk or trouble free operation. The paddle lifting device provided for easily open / close the lid. The steam release safety valve and pressure gage fitted on the lid and drain valve in the below of autoclave. The pressure can be use of between 5 to 20 PSI. The ISI electrical heating element provided in inner chamber for water heat and controlled by thermostat or Digital PID Temperature controller. The pressure is indicated in pressure gage. The Autoclave Sterilizer is supplied with complete perforated basket, cord plug. Highlights Longer service life Non-corrosive housing Low operational cost Efficient performance
Best Deals from Hospital Autoclave
Horizontal Autoclave
Get Price Quote
1 Piece (MOQ)
Horizontal Rectangular Front Loading Autoclave
Get Price Quote
152 Ltr. Semi Automatic Autoclave
75,000 Per Piece
1 Piece (MOQ)
Autoclave
55,000 Per Piece
A versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins.
Glass Bead Sterilizer
Get Price Quote
1 Piece (MOQ)
SIS – 1404 GLASS BEAD STERILIZER is a Quick, Easy and Accurate alternative to traditional methods of sterilization by destruction of all Micro-Organisms within seconds. GLASS BEAD STERILIZER is used in the Medical, Dental, Laboratory and Biotechnology / Tissue Culture, Pediatric professionals for the past 10 years. Our GLASS BEAD STERILIZER is incorporated with an imported thermostat, which maintains the temperature with an accuracy of ±1% these units, having a stainless steel body, are compact enough to be placed on any laminar Air Flow Work benches or any other workside tables in a clean room atmosphere.
Double Wall Vertical Sterilizer Autoclave
35,000 - 120,000 Per Piece
1 Piece (MOQ)
Made of stainless steel with the inner chamber of a thick pressure gauge. The outer surface has a mirror polish. The lid of this autoclave is thick along with a safety valve, pressure release valve, and drain valve. Spring loaded valve to adjust the pressure.Specifications: Dimension Power Capacity 250x450mm 2 KW 22 Ltrs 300x500mm 3KW 40 Ltrs 350x550mm 4KW 50 Ltrs 400x600mm 5KW 78 Ltrs 450x600mm 5KW 98 Ltrs 550x750mm 6KW 152litres
Double Wall Autoclave Vertical
15,000 Per piece
1 Piece (MOQ)
Portable Autoclave
Get Price Quote
1 Piece (MOQ)
Double Wall Vertical Autoclave
35,000 - 350,000 Per Piece
100 Piece (MOQ)
Stainless Steel Autoclave
6,600 Per Box
1 Piece (MOQ)
Vertical Autoclave
Get Price Quote
100 Piece (MOQ)
Vertical Autoclave
Get Price Quote
Verticle Autoclave is a versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins.Optional Automatic low-water level cut off- device. Pressure Control switch. Water lever arrangement. Dressing bins for various size.
Vertical Autoclave
Get Price Quote
Vertical Autoclave
36,000 Per
Cooker Type Autoclave
8,000 Per piece
1 Piece (MOQ)
Vertical High Pressure Autoclave
Get Price Quote
A versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins. Chamber Size & load Capacity (approx.) Dia x Depth a. 250x450mm 2KW 22ltrs. b. 300x500mm 3KW 40ltrs. c. 350x550mm 4KW 50ltrs. d. 400x600mm 5KW 78ltrs. e. 450x600mm 5kW 98ltrs. f. 550x750mm 6kW 152ltrs. Optional:- i) Automatic low-water level cut off- device. ii) pressure Control switch. iii) Water lever arrangement. iv) Dressing bins for various size.
Autoclaves
Get Price Quote
We are offering Hospital Instruments.
AutoClave Controller
3,800 - 4,000 Per piece
1 P (MOQ)
Autoclave Horizontal High Pressure
Get Price Quote
Cylindrical (triple walled) inner/outer chamber made of thick S.S. fitted with automatic pressure control switch and automatic low water level cut off device. Lid made of S.S. with radial lock to work on 440 volts 3 phase supply.
Rectangular Autoclave
Get Price Quote
Our Rectangular Autoclave is highly famous and is highly demanded by all. We supply our premium quality horizontal rectangular autoclave at one of the most affordable prices for everyone to avail them easily. We have also gained the position one of the preferred rectangular autoclave suppliers in India. Construction The unit has inner Chamber, Boiler, Lid and Jacket - all made of 304 grade stainless Steel, outer chamber of thick gauge mild steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. It is supplied complete with vacuum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular stand. It is available in the following standard sizes. Operatable on 3 Phase, 440 Volts A.C. Supply. Mode of Heating Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 440 volts three phase 50 cycles. Working Pressure The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g (15 psi - 17 psi) Working Temperature : 121° C Hydrotest Pressure :
Triple Walled Laboratory Autoclave
Get Price Quote
Horizontal Cylindrical Autoclave
Get Price Quote
1 Piece (MOQ)
Laboratory Autoclave
Get Price Quote
Vertical Autoclave
Get Price Quote
We offer high-quality Vertical Autoclave to the laboratories across the country and abroad. We have carved a niche in the market as the credible Manufacturer, Exporter, and Supplier of Vertical Autoclave from Haryana, India. Our Vertical Autoclaves are extensively demanded for sterilization, which is done under saturated steam pressure and at a point anywhere between 10-20 P.S.I. that is fairly adjustable too. And for quality, they undergo stringent quality tests. Rely on us! Details : With both inner chamber & SS wall Double walled units with inner chamber (Boiler made of 18 S.W.G. stainless steels) and outer chamber is covered with SW.S.Lid is tightened by wing nuts/radial locking system (AS ORDERED) Fitted with neoprene rubber gasketAll systems are hydraulically tested up to 40 P.S.I. as a safety measureAll autoclaves are fitted with standard accessories such as water indicator, pressure gauge, steam release cock, spring-loaded safety valve and gating elementSupplied complete with S.S. basket, cord and plug to work on 220/230 volts A.C. SupplyALL DELUXE MODELS besides being fitted with STAINLESS STEEL/GUNMATAL LID and having inner chamber made of S.S. and outer chamber covered with stainless steel are also fitted with VACUUM BREAKER as a SAFETY DEVICE
Auto Clave
Get Price Quote
We offer Auto Clave. SITRO scientific is a leading manufacturer company of "AUTOCLAVE". We can provide you best quality product at very competitive price.
Vertical Autoclave
5,200 - 6,500 Per piece
1 Piece (MOQ)
Laboratory Autoclave
Get Price Quote
Horizontal Autoclave
150,000 Per Piece
1 Piece(s) (MOQ)
We are the main supplier of this product.