Bod Incubator Dealers in Babyal, Ambala

• Material: Aluminum, Stainless Steel
• Voltage: 220V, 230V
• Frequency: 50Hz
• Number Of Shelves: 2 Shelves
• Chamber Volume: 112 ltrs
• Working Temperature: Temp Range 5 Digree Celsius with Accuracy +_ 1 Degree Celsius Double Walled

BOD Incubator is designed for low temperature incubation and routine determination of Bio - Chemical oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber of the BOD Incubator is made of richly anodized aluminum or highly polished stainless steel with self-support for wide range of self-spacing. Our offered BOD Incubator is supplied with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in white staving enamel paint or mat finished pestle color combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. The temperature can be regulated within the range by means of high precision double action thermo regulator. Inner air circulating system is provided to achieve uniform temperature in the whole chamber. A control panel is provided with various indicators such as on off switch, L - shaped thermometer, etc. The BOD Incubator is supplied with cord & plug, etc. The equipment is workable on 220V AC 50 Hz single phase. Details : Aluminum chamber sizes : 24" x 18" x 6" - 4 cubic ft. 33" x 20" x 16.5" - 6 cubic ft. 34.5" x 22.5" x 22.5" -10 cubic ft. 36" x 26" x 23" - 12 cubic ft. 27.5" x 25.5" x 35.5" -15 cubic ft. S. S. chamber sizes : 24" x 18" x 6" - 4 cubic ft.33" x 20" x 16.5" - 6 cubic ft. 34.5" x 22.5" x 22.5" -10 cubic ft. 36" x 26" x 23" -12 cubic ft.27.5" x 25.5" x 35.5" -15 cubic ft. Optional accessories if require with above at extra cost : Timer 0.24 hours day night cycle.Co2/air mixer nozzle is provided.Internal illumination with 3 fluorescent tubes.Digital temp. Indicator-cum-Controller.Micropcessor PID digital temp. Indicator-cum-controller.Automatic Voltage Stabilizer 3-5 KVA (recommended must.)

• Country of Origin: India
• Type: Bod Incubator
• Material: Aluminum, Metal, Mild Steel, Stainless Steel, Steel
• Certification: CE Certified, ISO Certified
• Application: Industrial Use, Medical Use
• Color: Black, Blue, Green, White
• Voltage: 220V
• Condition: New
• Frequency: 50Hz
• Warranty: 5
• Temperature: 0-50Deg C
• Volume: 100-150ltr, 150-200ltr, 200-250ltr, 250-300ltr, 300-350ltr
• Automation Grade: Fully Automatic, Semi Automatic
• No of Shelves: 2 Shelves, 3 Shelves
• Brand Name: BYANLAB
• Power Supply: 220

We are engaged in providing high quality BOD Incubator. BOD Incubator offered by us is designed and made by skilled technicians and engineers using high grade material. BOD Incubator is extensively used for testing various pharmaceutical samples. Clients can avail BOD Incubator at industry leading rates from us. Specifications : Castor wheel mounted cabinetDouble walled constructionOuter wall of M.S sheet duly paintedMost versatile for Biochemical oxygen demand and determinationsInner chamber made of aluminum or S.S.Circulation fans maintain uniformity throughout the chamberLock and key arrangement available75mm gap between the outer or inner chamber is filled with special grade glass wool for preventing thermal lossTriple walled back fitted with two air circulating fans for maintaining temperatureInner glass doors allow inspection of specimensProvided with door operated illumination lampRefrigeration unit is formed by ISI marked compressorSeparate indicator lamps on front panel for main, heating and incoming voltage3 shelves cord and plug to work on 220 A.C. suppliesTemperature ranging from 5oC to 50oC is controlled by solid state electronic Digital Temperature Indicator-Cum-Controller, with an accuracy of ± 0.5oC Sizes Available : 455 x 610 x 410mm - 4 Cuft505 x 500 x 415mm - 6.1 Cuft570 x 830 x 550mm - 10 Cuft650 x 875 x 550mm - 12 Cuft700 x 900 x 650mm - 15 Cuft Optional Accessories : Automatic timer 0-24 hrsAir compressor for use with aboveInterior illumination with 3 nos. fluorescent tubes ( temp. 10o to 50oC )Arrangement for incubation of co/Air mixtureCarbon Dioxide Cylinder (10 liters. Capacity )Shaking machine to be fitted inside the chamberHumidity control arrangement 55% to 95% + 3% RHAutomatic Voltage Stabilizer 3KVA ( Triple relay )

• Color: White
• Chamber Volume: 250 Litre
• Number Of Shelves: 2 Shelves
• Temperature Range: 5 to 75 degree celsius
• Country of Origin: Made in India
• Model Name/Number: RLE-408M
• Brand: RELIABLE LAB EQUIPMENT

• Chamber Volume: Available in 112, 336 & 420 Liters., 280, 171, 250 Litre, 500 Litre, 400 litre, 350 Litre
• Number Of Shelves: 4 Shelves, 2 Shelves, 3 Shelves
• Temperature Range: 10 to 100 DegC
• Warranty: 1 Year
• Automation Grade: Semi-Automatic
• Display: Digital
• Power Source: Electric
• Accuracy: +/- 1 DegC

Features: Better Glass wool / Puff Insulation keeps the temperature of the chamber immune from outer environment Silent & unique Design of Air Circulation provide throughout uniform air movement & improved Temperature distribution Inner illumination through florescent light on opening of door Double door: outer of MS powder coating & Inner acrylic door from clear viewing without disturbing the chamber temp. Polish 304 grade S. Steel interior, corrosion resistant for long life operation Having adjustable shelves to make more space for different height Kanthail A-1 super quality round shaped heaters for heating & hermetically sealed compressor for cooling Equipped with digital PID temperature Controller Cum indicator Digital display of volts & ampere

• Color: Black

Glass agencies erose are manufacturer of b o d incubator . Glass agencies erose are manufacturer and exporter of all type of medical, laboratory, ophthalmic and optometric instruments.

• Country of Origin: India
• Application: Medical Use
• Condition: New
• Frequency: 50Hz
• Temperature: 0-50Deg C
• Volume: 100-150ltr

• Chamber Volume: 400 litre, 350 Litre, 500 Litre, 250 Litre
• Number Of Shelves: 2 Shelves, 3 Shelves, 4 Shelves
• Condition: New
• Temperature Range: 5 to 105 degree celsius, 5 to 75 degree celsius
• Automation Grade: Semi-Automatic
• Voltage: 220
• Warranty: 1 year
• Application: Hospital
• Door Type: lockable
• With Interior Light: Yes
• Accuracy: 0.01%
• Is It Portable: Non Portable
• With Portable: No
• Power Failure Alarm: Yes
• Interior Light: Yes
• Display Type: Digital
• Is It With Door Lock: With Door Lock
• Inner Chamber: SS

• Brand Name: LABeQ

Driven by a vision to achieve significant growth in this industry, we are providing a premium quality array of BOD Incubator. Brand LABeQ Frequency 50 Hz Power 220V AC Phase Single Phase Timer 0-24 Hr Chamber Dimension 24x24x24 inch

Craving for 100% customer satisfaction, we as a prominent Manufacturer, Supplier and Exporter put a great effort in delivering excellence. BOD Incubator is available in a variety of sizes and designs. It is manufactured by skilled engineers to make sure there is no compromise with the quality. Its durability, sturdiness and precise design make it an attractive alternative. Get your hands on the fascinating quality for minimal rates.   Specifications : Inner chamber Stainless Steel. PID control, 10-50°C ± 1°C (Programmable cycle). Finned tube Evaporator. Audio visual alarm for temperature. Ambient to 95 % RH ± 3% RH. Micro controller based. 16 x 2 Line alphanumeric LCD display   We can also provide you Aging Chamber, Environmental Chamber & Humidity Cabinets as per your specifications.

PRODUCT DETAILS Cowbell BOD Incubator Temp. Range 5 °C to 50° C with Accuracy of±1°C. Double walled, inside anodized Aluminum/Stainless steel and outside M.S. powder coated to work on 220/230 volts A.C. 50Hz. (i) timer 0-24 hours day night cycle. (ii) CO2 air mixer nozzle is provided. (iii) Internal illumination with 3fluorescent tubes. (iv) Digital temp. indicator-cum-controller. (v) Microprocessor PID digital temp. indicator-cum-controller. (vi) Automatic Voltage Stabilizer 3-5 KVA (recommended must).

We are offering scientific instruments, lab instruments.

• Brand Name: Radical
• Model Number: Rsti-112
• Place of Origin: Ambala

Orbital shaking incubator-cum-b.o.d model no. Rsti-112 orbital shaking incubator cum b.o.d incubator is specifically designed to controlled incubation with orbital shaking arrangement with powerful geared motor for many labotatory procedures such as tissue culture, fermentations studies, enzyme reactions, growth studies etc. The outer chamber is made up of m.s sheet duly powder coated & inner chamber is made of thick s.s. Sheet. The gap between wall is fitted with high grade glass wool to avoid thermal loss. The plexi glass window provided to inspect the specimen without disturbing the inner temp. The incubator is illuminated with one door operated or panel operated flurescent tube. The unit has a temp. Range from 5â°c to 60â°c. The temperature is controlled by dual display microprocessor pid temperature indicator cum controller with a accurancy of + 0.5â°c. Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30 rpm to 250 rpm. The tray of the shaker is also made of s.s sheet with lotus type clamps to hold flasks. The unit is fitted with digital rpm meter, 999 min digital timer.

Excellent quality, high performance yielding BOD incubators offered by our company are used across diverse industrial segments. Fabricated from fine grade raw material, our BOD incubators are used widely because of their outstanding performance. We make available BOD incubator in various sizes and specifications for meeting the exact requirements of the clients. About BOD Incubator : Fabricated from premium quality raw material Available in various sizes and specifications Can also be customized Versatile design Energy efficient Long life Low maintenance Uses : Also used for specialized and individual research applications Validation Protocols : IQ OQ & PQ Documentation with calibration & Tradability certificate of controller. Safety Features : Built in Temp Deviation Audio visual alarm, Safety thermostat for overshoot Temp. Cut off system. HRC Fuses for compressor heater & mains Time daily circuit for safety of compressor. Special Care : A suitable K V. A. Servo stabilizer is strongly recommended. Technical Specifications : Double walled cabinet mounted on castor wheels Inner chamber made of S.S.304 & Outer chamber made of M. S. Powder coated Full Length inner acrylic door permit inspection of specimens with out disturbing the Temp. Temp. Controlled by solid State Digital controllers housing all the control with PT-100 sensor illumination light are provided for viewing with door limit switch. CFC Free hermetically sealed compressor provide temp. For below ambient condition. Air circulation fan for maintain Temp. Uniformity through out the chamber. Flush fitting insulated double walled door The Chamber is provided with modular removable shelves made of S. S. For complete flexibility in use To work on 230 volts 50 H2.

• Material: Aluminum, Metal, Mild Steel, Stainless Steel, Steel
• Application: Industrial Use
• Color: Blue, White
• Voltage: 220V
• Frequency: 50Hz, 60Hz
• Temperature: 0-50Deg C, 100-150Deg C
• Automation Grade: Fully Automatic
• No of Shelves: 2 Shelves

BOD Incubator is designed for low temperature incubation and determination of Bio Chemical Oxygen Demand (B.O.D). The BOD Incubator comes with a double wall construction. The Inner chamber is made of richly anodized aluminum or highly polished stainless steel with with two / three removable perforated shelves. The exterior chamber of the BOD Incubator is made of thick mild steel sheet duly finished in enamel paint. Outer double wall door is provided with magnetic gasket and lock & key arrangement. The inner door is made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temperature insulation. The cabinet is mounted on castors. The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has made within the chamber for higher temperature. Inner air circulating system is provided to achieve uniform temperature in the whole chamber. A control panel is provided with various indicators such as on off switch, L - shaped thermometer, etc. The BOD Incubator is supplied with cord & plug, etc. The equipment is workable on 220V AC 50 Hz single phase.   Details : Aluminum / SS Chamber sizes : 24" x 18" x 6" - 4 cubic ft. 33" x 20" x 16.5" - 6 cubic ft. 34.5" x 22.5" x 22.5" -10 cubic ft. 36" x 26" x 23" - 12 cubic ft. 27.5" x 25.5" x 35.5" -15 cubic ft.   Optional accessories : Timer 0.24 hours day night cycle. Co2/air mixer nozzle is provided. Internal illumination with 3 fluorescent tubes. Digital temp. Indicator-cum-Controller. Micropcessor PID digital temp. Indicator-cum-controller. Automatic Voltage Stabilizer 3-5 KVA (recommended must.)

• Voltage: 220V, 230 V
• Frequency: 50Hz
• Temperature: 0-50Deg C
• Automation Grade: Fully Automatic
• Humidity Accuracy: +/- 2.5% RH
• Temperature Uniformity: +/- 0.5 degree c

• Material: Metal
• Application: Medical Use
• Color: Blue
• Temperature: 0-50Deg C
• Automation Grade: Semi Automatic
• No of Shelves: 2 Shelves

Details Bod Incubator is Double wall construction. Inner chamber made richly anodized aluminium or highly polished stainless steel sheet. Supplied with two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in write staving enamel/powder coated paint with mat finished colour combination. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door unbreakable acrylic transparent sheet for inspection of material in the chamber without disturbing the chamber temperature.   Optional Timer 0-24 hours day night cycle. Co2 /air mixer nozzle is provided. Internal illumination with 3 fluorescent tubes. Microprocessor PID digital temp. Indicator-cum-controller. Automatic Voltage stabilizer 3-5 KVA (recommended-must).

• Valume: 100L
• Temp.: 0-60deg C

We are assisted by a team of professional quality experts who check our products at different stages such as production, packaging, and delivery. As our payment methods are practical and convenient, we are highly recommended by the clients. We provide an option to pay in cash as well as through bank transfer. Features : Compact design Energy efficient Effective cooling

• Material: Metal
• Application: Industrial Use
• Voltage: 220V
• Frequency: 50Hz
• Temperature: 100-150Deg C
• Volume: 100-150ltr
• Automation Grade: Semi Automatic

BOD Incubator we manufacture and supply is high on demand in the markets. BOD Incubator is widely acknowledged by the clients owing to its sturdy design, smooth functioning and high-end performance. Competitive prices and prompt delivery has strengthened our position in the market as one of the dependable BOD Incubator Manufacturers and Suppliers based in India. Specifications : Double wall construction equipment Exterior chamber manufactured with use of thick mild steel sheet duly finished in white stoving enamel/powder coated paint with finished color combinations Inner Chamber fabricated using richly anodized aluminum or highly polished stainless steel sheet, provided with two/three removable perforated shelves Outer double wall door is equipped with magnetic gasket and lock & key arrangement Operated through inner illumination Inner door unbreakable acrylic transparent sheet for inspection of material in the chamber without disturbing the chamber temperature Heating arrangement done through the chamber to work on high temperature conditions Standard cooling unit provided with a sealed compressor Temperature is controlled through Protective devices have been fitted below the chamber for safe and effective working Deluxe Digital Controller that ranges from 5oC ± 0.5oC Control panel with different indicators, on-off switch and cord and plug etc. to operate on 220VAC Hz single phase. Inner air circulating system is also supplied for achieving uniform temperature Optional Accessories : Co2 / air mixer nozzle Internal illumination with 3 fluorescent tube Timer 0-24 hours day night cycle Automatic Voltage stabilizer 3-5 KVA (recommended must) Microprocessor or PID digital Temperature Indicator-cum-controller

• Material: Stainless Steel
• Application: Laboratory
• Voltage: 220V
• Frequency: 50Hz
• Temperature: 0-50Deg C
• Volume: 100-150ltr
• Automation Grade: Fully Automatic