Calorimeters Dealers in Ambala

It is used to determine the absolute heat of combustion of foods (calorific values). It may also used to find out relative values of heat of combustion of a series of foods by comparing the rise of temperature of a fixed volume of water when a constant mass of a substance is burnt completely. Apparatus Comprises of two assemblies: a) Calorimeter Unit b) Base Unit The Calorimeter unit carries heat exchanger unit and base unit has crucible holder, ignition system etc. etc. a) Calorimeter Unit Comprises of a glass water jacket 150 x 80 mm (Ht x dia) surrounding a combustion chamber integral with it and open at its base. This combustion chamber is connected to a copper spiral heat transfer tube. The upper end of this tube passes through a hole in the lid on top and when in use is connected to a filter pump to draw the products of combustion through the copper spiral. A wire stirrer also passes through the cover and a hole with a bored rubber stopper is provided to accommodate a thermometer, Supplied complete with thermometer -5 to + 50° C x 0.10C (Mercury in glass) b) Base Unit Metal disc about 100 mm dia with a boss for mounting on 12mm retort rod (without rod). The unit works as the base of the combustion chamber and has inlet tubule 6 mm diameter for oxygen supply (oxygen supply is necessary to completely bum the food) and pair of pillars carrying low voltage igniter coil. Also having a moveable crucible support to enable the crucible to raise to the level of igniter coil from outside the assembled apparatus Supplied without retort stand, crucible or spirit lamp. Spare and Accessories Spare borosilicate glass calorimeter jacket (150 x 80mm, L x Dia) (HT-1536/1) Spare igniter coil pack of 5 PCS.(HT-1536/2) Nickel Crucible, one PC.(HT-1536/3) Retort stand & base: Tripod 'A' base with rod(HT-1536/4) Spirit lamp for volatile samples(HT-1536/5) Low Voltage Supply Unit 12 V: PI. see Power Supply Section. Oxygen Gas supply with regulator: To be obtained locally.

For the experimental determination of the specific heat capacity of different metals. Cylindrical metal block, mass 1 kg. Adjusted to an accuracy of ± 2%. Each block is drilled with two holes, a large central hole, 12.5mm diameter, for a special immersion heater and a smaller hole, 7.5mm diameter, for a thermometer of Copper, Brass, Aluminium & Iron. 

• Certification: CE Certified, ISO 9001:2008
• Application: Industrial Use
• Weight: 0-100kg, 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Voltage: 110V, 220V, 3-6VDC, 6-9VDC, 9-12VDC
• Display Type: Analog, Digital
• Frequency: 50Hz-65Hz
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Yrs, 2Yrs, 5yrs
• Automation Grade: Automatic, Manual

We are called upon as the most outstanding gas calorimeter manufacturer and amid the leading exporters from india. Polished metal, with fitted with rubber stopper and metal stirrer, it is available in aluminium and copper. This bomb calorimeter is available in various system choices as per the demands of our customers. We ensure timely delivery of combustion calorimeter and availability at most affordable prices.

We offer calorimeter. Mechanical equivalent of heat by measuring the heat generated in an electrical resistance. Includes the calorimeter set of two described above. The plastic lid is fitted with a heating coil to work with 6v supply or a battery, two 4mm socket binding posts for electrical connections, stirrer with an insulated handle and a single-hole rubber stopper for inserting thermometer. Supplied without the thermometer. Requires a suitable voltmeter, ammeter, and thermometer (not supplied).

• Type: Bomb Calorimeter
• Certification: CE Certified, ISO 9001:2008
• Application: Industrial Use
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Voltage: 110V, 220V
• Display Type: Analog, Digital
• Frequency: 50Hz-65Hz
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Yrs, 2Yrs
• Automation Grade: Automatic, Fully Automatic

We have carved a niche as one of the prominent Physics Instruments Manufacturers and Exporters from India. Various national as well as international clients are placing bulk orders for the Physics Lab Instruments due to the unmatched quality and accuracy in performance. The use of optimum quality materials also make them ideal for respective applications. Additionally, customers are eased with the availability of the General Physics Instruments in sizes and dimensions meeting the international standards.

• Application: Industrial Use
• Feature: Durable, Stable Performance
• Display Type: Analog
• Body Material: Metal
• Model: GWL964

Calorimeters Copper/ Aluminium: One piece spinning with parallel sides & rolled rim. Type A) B) Size 75 x 50 mm 100 x 75 mm Available in both Copper & Aluminium.   Calorimeter Set: A complete set comprising the following : 1 copper calorimeter 75 x 50 mm 1 wooden outer box with felt lining 100 x 75 mm approx. 1 sliding wooden cover for outer box 1 copper stirrer with loop to fit inside the copper calorimeter 1 thermometer holder made of brass, removable   Calorimeter Set Copper: Consisting of spun copper cylinder contained within a large 75 mm diameter x 100 mm aluminium outer vessel with 10 mm of insulating material between. Supplied with wooden cover for outer vessel with bung for mounting thermometer support clip. Dimensions: 110 mm x 200 mm overall.   Joule’s Calorimeter: For determining the specific heat capacity of liquid by electrical method. Consisting of a nickel plated copper vessel 75 x 50 mm size with outer vessel of teak wood fitted with bakelite top with hole for thermometer. The terminals connected to a coil of wire (for current up to 3 amps.) are fitted, complete with stirrer & outer teakwood vessel.   Metal Block Calorimeters : For experimental determination of the specific heat capacity of different metals. Cylindrical metal blocks of mass 1 kg; adjusted to accuracy of ±2%. Each block drilled with two holes. A large central hole 12.5 mm diameter for a special immersion heater & a smaller hole, 7.5 mm diameter for a thermometer.

• Usage/Application: Chemical Laboratory
• Brand Name: PSAW
• Material: SS, Plastic
• Capacity: 2.5 Ltrs./rev
• Accuracy: 0.5%
• Smallest Division Capacity: 0.02 Ltr

• Application: Industrial Use
• Weight: 100-200gm
• Voltage: 220V
• Frequency: 50Hz-65Hz
• Power Source: Electric
• Feature: Durable
• Warranty: 1Yrs
• Automation Grade: Automatic

Avail from us a proven range of Calorimeter, which is fabricated using high grade components. Acknowledged for its hassle free operation, smooth functioning, durability, consistent performance and longer working life, clients have been turning back to us with repeated orders for Calorimeter. Quality packing materials are used for delivering the Calorimeter to the set destination. Moreover, we make this Calorimeter available to the clients at most discounted rates. Presently, we are enlisted at the apex in the list of prominent Calorimeter Manufacturers and Suppliers based in India. Range : Separating Calorimeter Throttling Calorimeter

• Brand Name: Lab Tech
• Automation Grade: Digital
• Material: S.S
• Model Name/Number: LTC-207
• Usage/Application: Laboratory
• Auto Off: Yes
•  :  

We provide Separating and Throttling Calorimeters in various ranges that are ideal for finding out dryness fraction of stream. We offer Separating and Throttling Calorimeter to suppliers, wholesalers, and retailers at competitive prices. ExperimentTo find out dryness fraction of stream. Separating Calorimeter It consists of two concentric chambers, the inner chamber and the outer chamber, which communicates with each other through an opening at the top. As the steam discharges through the metal basket, which has a large number of holes, the water particles due to their heavier momentum get separated from the steam and collect in the chamber. The comparatively dry steam in the inner chamber moves up and then down aging through the annular space between the two chambers and enters the Throttling Calorimeter. Throttling Calorimeter It consists of a narrow throat (Orifice). Pressure and temperature are measured by pressure gauge and thermometer. The steam after throttling process passes through the heat exchanger and condensate is collected. Steam Generator is also provided to supply the saturated steam (Max) at 2kg/cm2 pressure (max.).There is no need of boiler or boiler connection.

We are offering calorimeter with wooden box. Abbomedtm copper, 75x50 mm., height x diameter, resting on felt pad inside wooden polished box, which is provided with a brass nickle plated thermometer holder, with copper stirrer.

• Certification: CE Certified, ISO 9001:2008
• Application: Industrial Use
• Weight: 0-100kg, 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Voltage: 110V, 220V, 3-6VDC, 6-9VDC, 9-12VDC
• Display Type: Analog, Digital
• Frequency: 50Hz-65Hz
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Yrs, 2Yrs, 5yrs
• Automation Grade: Automatic, Fully Automatic, Manual, Semi Automatic

• Country of Origin: India
• Certification: ISO 9001:2008
• Application: Laboratory
• Weight: 0-100kg
• Feature: Accuracy, Durable, Light Weight
• Display Type: Analog
• Frequency: 50Hz-65Hz

• Application: Chemical Plant
• Packaging Type: Corrugated box
• Brand Name: Labappara
• Material: iron,Copper,Stainless steel,Brass
• Color: Red,Silver
• Minimum Order Quantity: 5 Packet

We are offering Calorimeter.

• Type: Bomb Calorimeter
• Certification: ISO 9001:2008
• Application: Industrial Use
• Color: Maroon, White
• Voltage: 220V
• Display Type: Analog, Digital
• Frequency: 50Hz-65Hz
• Material: Cast Iron, Stainless Steel
• Power Source: Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Yrs, 2Yrs
• Automation Grade: Automatic

product details: application laboratory brand labeq material aluminum finish polished type with fitted with rubber stopper and metal stirrer .

For determination of the specific heat capacity of a liquid by the electrical method. The apparatus comprises a nickle-plated copper calorimeter 75x50 mm, fitted with a cork and a heating coil of thin Constantan wire. The resistance of the coil is 6 ohms and the recommended working current is 0.5 A with a maximum of 1A. Electrical connection is by means of a pair of barrel connectors. Supplied without thermometer.    

• Type: Bomb Calorimeter
• Certification: CE Certified, ISO 9001:2008
• Application: Industrial Use
• Weight: 0-100kg, 100-200gm, 200-300gm, 300-400gm, 400-500g
• Color: Brown, Green, Grey, Maroon, Red, White, Yellow
• Voltage: 110V, 220V, 3-6VDC, 6-9VDC, 9-12VDC
• Display Type: Analog, Digital
• Frequency: 50Hz-65Hz
• Material: Aluminum, Brass, Cast Iron, Copper, Plastic, Stainless Steel
• Power Source: Battery, Electric
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance
• Warranty: 1Yrs, 2Yrs
• Automation Grade: Automatic

Copper calorimeter 75 x 50 mm with felt insulation, outer vessel of 100 x 65 mm size with a plastic lid having holes for thermometer & stirrer. A thermometer holder is fixed to the outer vessel. Complete with stirrer.

• Brand Name: Physilab
• Usage/Application: For Laboratory
• Shape: Round
• Packaging Details: Card Box packing
• Vessel Material: Nickel plated copper
• Vessel Size: 75 x 50mm

We are offering separating & throttling calorimeter aim to find out dryness fraction of steam by combined separating and throttling calorimeter. Product details the steam passing out from separating calorimeter may still contain some water vapour , in it . In other words it may not be absolutely dry . Again , in a throttling calorimeter steam after passing through the throttle valve must be superheated or at least dry saturated . This limits the extent of dryness fraction that can be reliably measured , depend up on the pressure of steam in the main steam pipe . If a sample of steam, which may be still wet after passing through the throttle valve i.e it will not be superheated . Thus under this condition the throttling calorimeter fails to enable us in determining the value of dryness fraction of steam . to overcome this difficulties we make use of separating and throttling calorimeter . First the steam is passed through separating calorimeter where itlosses most of it’s moisture and becomes comparatively drier, it is than passed through the throttling calorimeter where super heating takes place with out changr of total heat . The temperature and pressure of steam after throttling are measured by using a thermometer and manometer respectively. Description :- the set up consist of a separating and throttling calorimeter . A steam generator is provided at the base of the apparatus . A thermostat knob is provided at the front of apparatus to control the temperature inside the steam generator . Steam from steam generator is passed from separating calorimeter where most of the water partical get separated from steam and then passed to throttling calorimeter where steam get superheated . After that superheated steam passed through heat exchanger to condense the steam. Saparating calorimeter

Separating calorimeter it consists of two concentric chambers, the inner chamber and the outer chamber, which communicates with each other through an opening at the top. As the steam discharges through the metal basket, which has a large number of holes, the water particles due to their heavier momentum get separated from the steam and collect in the chamber. The comparatively dry steam in the inner chamber moves up and than down aging through the annular space between the two chambers and enters the throttling calorimeter.

• Application: Laboratory
• Usage/Application: Laboratory
• Material: Mild Steel
• Outer Vessel Length: 100 mm
• Outer Vessel Diameter: 75 mm
• Inner Vessel Length: 75 mm
• Inner Vessel Diameter: 50 mm

We are offering calorimeter with wooden box. Copper, 75x50mm, height x diameter, resting on felt pad inside wooden polished box, which is provided with a brass nickel plated thermometer holder, with copper stirrer.