Concrete Testing Equipment Dealers in Ambala Cantt, Ambala

• Model Number: STC-41
• Color: black
• Voltage: 220 V
• Usage/Application: Concrete testing lab equipment
• Brand: Superb Technologies

• Material: Mild Steel
• Application: Lump Testing
• Finishing: Powder coated
• Height: 300mm
• Bottom Diameter: 200mm
• Top Diameter: 100mm
• Tamping Rod: 16mm x 600mm

• dia: 3mm

This is a brass tube approximately 53cm long and 2. 8cm i. D. With a wooden handle.. Cement and Concrete Testing Lab equipment manufacturers,exporters and Cement and Concrete Testing Lab suppliers Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia is drilled on the near handle.

• Size: 25 mm x 25 mm x 250 mm

Shrinkage Bar Mould (One, two ,three Gang) for Cement Testing can be provided by HoverLabs. The mould is utilized for throwing examples of bond and total blends for measuring the potential sweeping soluble base reactivity. The mold, which has 25 mm x 25 mm x 250 mm, compelling gage length is made of mellow steel and has precisely machined faces. The parts of the molds are tightly fitted and immovably held together when gathered. Supplied complete with base plate and four stainless steel smooth reference pins.

NAUGRALABS LABORATORY PRODUCT NAME: SHRINKAGE BAR MOULD FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-038046 Description and Specification for Lab Tenders The mould is used for casting specimens of cement aggregate combinations for measuring the potential expansive alkali reactivity. Salient Features Specifications. Cement and Concrete Testing Lab equipment manufacturers,exporters and Cement and Concrete Testing Lab suppliers The mould, which has 25mm x 25mm x 25mm effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base plate and four stainless steel smooth reference pins. civil lab equipments manufacturers

Code: Aggregate0009 Aggregate Impact Value Test Apparatus. Aggregate Impact Value Test Apparatus Aggregate Impact Value Test Apparatus from Civil Mechanical Laboratory India   Aggregate Impact Value Test Apparatus Used to determine the impact value of aggregate. The sturdy construction consists of a base and support columns to form a rigid framework around the quick release trigger mechanism to ensure an effective free fall of the hammer during test. Aggregate Impact Value Test Apparatus for Civil Engineering from Laboratory Equipment Manufacturers India - The free fall can be adjusted through 380 ± 5mm. The hammer is provided with a locking arrangement. The apparatus is supplied complete with cylindrical cup, metal measure 75mm dia x 50mm high and a tamping rod.  

• Material: Mild Steel
• Capacity: 200 ml
• Finishing: Color Coated
• Height: 35 cm
• Rust Proof: Yes

Micro 1013-A : Shrinkage Bar Mould – One Gang (One Compartment) Micro 1013-B : Shrinkage Bar Mould – Two Gang (Two Compartment) Micro 1013-C : Shrinkage Bar Mould – Three Gang (Three Compartment) Micro 1013-D : Shrinkage Bar Mould – Four Gang (Four Compartment) Spares: Stainless steel smooth or knurled and threaded reference pins as required.

• Brand Name: JLab
• Place of Origin: India

Vee Bee Consistometer The instrument comprises of a slump cone with a hopper, specimen container, a transparent plastic plate attached to a graduated rod, , mounted on a vibrating table, and a tamping rod 16mm dia. x 600mm long. The vibrating table has fixed amplitude and frequency of vibration, imparted by a motor drive mechanism.

We are offering concrete permeability apparatus. We would like to introduce ourselves as one of the manufacturer & exporter of scientific, educational & laboratory equipments for use in schools, colleges, laboratories, industries and research institutes. We are manufacturing a wide range of engineering equipments, educational instruments, microscopes, projectors, polarimeters, refractometers, microtomes, demonstration models, lab glassware, plastic ware and the general laboratory equipments. 'unicon' instruments was established long way back in the year 1954. And our equipments have received appreciation from the end users. "concrete permeability apparatus" is being manufactured by us in various specifications and can also be custom built as per your requirements.

• Cement and concrete testing lab: Flow Table IS:6932 - Hand Operated
• Cement and concrete testing lab: Concrete Permeability Apparatus - Single Cell

It is used for testing 40mm x 40mm x 160mm mortar specimens for flexural strength. (rilem cembureau test) by single point loading. Salient features specifications : it is a motorized, mechanical unit. The speed is adjusted so that the load increase on the specimen is between 4 to 6 kgsec. A flexure test attachment for keeping the specimen in position is also supplied. This consists of two rollers 10mm. Diameter and spaced 100mm apart, and a third roller of the same diameter equidistant from the first two and for transmitting the applied load to the opposite face of the prism. The unit is for operation on 230 volts, single phase, 50 cycles a.c.supply. Loads are measured on a proving ring fitted with a sensitive dial gauge. Supplied without proving ring. accessories: proving ring, capacity 500 kn.

civil lab equipment, Volumetric Pipette, Sherrington Rotating Drum

A.100 KN Flexure Testing Machine – Hand Operated.BIS-516. For Flexure Strength Test on moulded concrete flexure test specimens of 15 cm x 15 cm x 70 cm or 10 cm x 10 x 50 cm. size by third point loading method. The machine consists of a welded steel frame. The hydraulic jack of 100 KN. Capacity is fitted with the top plate and its ram moves down words for load application. To the ram of the jack is attached to top loading beam with two 38 mm diameter rollers which can be placed at 133 mm or 200 mm centres for loading 10 cm or 15 cm beam respectively. The retaining springs are provided for the rollers and two retaining springs for the loading ram. A supporting beam with two 38 mm dia rollers is placed on the base of the machine. These rollers are also held with retaining springs and their centre – distance can be set either at 400 mm or 600 mm for 10 cm x 10 cm x 50 cm and 15 cm x 15 cm x 70 cm beams respectively. A hand operated double action hydraulic pump with oil reservoir is attached to the right side of the machine. A 15 cm pressure gauge calibrated from 0 – 100 KN in 1 KN division is also supplied which can be fitted to an adaptor at the top of the machine. Supplied complete with an operating handle. Maximum Daylight 175 mmMaximum Ram Travel 75 mm   Similar to as above but provided with a motorised pumping unit housed in a separate console which can be connected to the loading ram or the flexure testing machine through a steel connecting tube. The pumping unit is of double plunger type. All the moving parts of the pumping unit are housed in the oil reservoir, which ensures positive lubrication. The drive from the motor to the pump is through a V-belt. A separate single plunger hand operated pump is also incorporated in the unit for operation in case of power breakdown. A 20 cm dia pressure gauge is fitted in the console at an angle for easy of reading and a maximum red pointer is provided on the gauge to record the load at failure. A micro-switch to protect against overloads and a relay to avoid the accidental self starting of the machine, after a power breakdown on subsequent restoration of power, are incorporated in the electrical control circuit.Suitable for operation on 220 Volts, 50 Hz., Single phase.

• Material: Stainless Steel
• Rod Length: 600 mm
• Rod Diameter: 16mm
• Tamping Rod: 0-60cms
• Tube Height: 300mm

Concrete Testing Equipment, Medical Equipment, Scientific Instruments

Hand Sanitizer Dispenser, Nebulizer Machine, Conical Flask, Dental Autoclave

Concrete Permeability Apparatus, Stainless Steel Distillation Apparatus