Electronic Circuit Boards Dealers in Ambala

Worcester circuit board:- this circuit board is made on polished nuwood and attched with terminals . Provided with bulb holders attached with the strips which is suitable to insert in the terminals to make the circuit in series or parallel as required . Porvided with the accessories which is shown.

The Electrical Circuit Board can drastically reduce the number of requisite connecting leads and the baseboard is the main component of the circuit board. This baseboard has the required cell holders and terminal points, and the Electrical Circuit Board offers clear electrical circuit layouts. The company is a highly distinguished Manufacturer, Exporter & Supplier of Electrical Circuit Boards.Accessories & Components Four Diodes Four Resistance Four Capacitors One Photovoltaic Cell One LED One Thermistor Two Leads Black Two Leads Red Four Fuses One LDR Three Batteries (1.5V) One Multimeter

• length: 20 cm

While climbing on the success ladder, it has become increasingly important for us to deliver precisely tested and high grade Breadboard Trainer kit to clients. Offered kit is manufactured under the guidance of knowledgeable professionals using sophisticated machinery. Provided kit is tested on all level of production to deliver a defect free product to the clients.

Consists of base board with nos. of metal connection pillars, nos. of flexible connection strips and accessories comprises of 18 bulbs 1.25V, 0.25A, 9 connectors with lamp holders, 12 plain connectors, one connector with rheostat, 1 rectifier, 1 resistor, 2 leads with crocodile clips, 2 leads with 4mm plug and crocodile clips, 2 crocodile clips, 2 bell push, 2 iron nails, 1 length each bare copper wire. Eureka wire, plastic covered copper wire, 1 hard board disc drilled, 4 pencil leads, 1 copper foil, 1 steel wool piece. Supplied in card board box.

• Resistor: 3.9 ohm 2.5 W

Worcester Circuit Board Enables students to investigate nature and properties of electricity by using simple circuits which are easily constructed on a base board. The connector system uses p.c.b. strips with cut-out sections whose ends can easily be inserted in spring terminals, ensuring low contact resistance and ease of connectlon. The kit consists of :terminals and three battery holders.

We are well reckoned as one of the prominent worcester spare parts manufacturers and exporters from India. Our worcester circuit board consists of a base board, complete with terminals, a set of metal connection pillars & a number of clips on flexible connection strips & accessory units; enabling a wide variety of electrical circuits to be constructed quickly & easily. The phosphor - bronze strips of worcester boiler spares are so designed that when flexed a little in the fingers, they are easily slipped over the pass where their natural spring holds them firmly in position & ensures a good electrical contact. Supplied with all the necessary accessories, our worcester spare parts are highly efficient.

Bread Board With Power Supply Board having:- two Nos Vertically Common Strip (Total 1280 Tie Points) and four Nos. Horizontally Common Strips (Total 400 Tie Points), DC Regulated Power Supply +5V1Amp & one variable 0 - ±15V 500mA.

• Type: Pcb Machine
• Weight: 100-200kg, 300-400kg, 500-600kg, 700-800kg, 900-1000kg
• Color: Blue, Grey, Light Green, Off White, Silver, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Application: For Removing PCB, Spare Parts Dust
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Driven Type: Electric, Hydraulic, Pneumatic
• Warranty: 1year, 2years

• Brand: Eletech
• Model No: ELI-817
• Display Size: 22″
• Test Points: 11 Nos of Test Points
• Dimensions: 410x210x85mm
• Power Requirements: 220V AC, +/-10%, 50Hz
• Standard Accessories: Remote Control & Instruction Manual
• Category: Demonstration Kits
• Tag: LED TV Trainer

WORCESTER CIRCUIT BOARD which are easily constructed on a base board. The connector system uses p.c.n. strips with cut-out sections whose ends can easily and quickly insert in spring terminals, ensuring low contact resistance and good electric contact.

Code: EEN0002 Power Project Board Circuit Lab. Power Project Board Circuit LabDescriptionPOWER PROJECT BOARDThe Power Project Board with prototyping breadboard, power supplies.CIRCUIT LABThe Circuit Lab with prototyping breadboard, power supplies and an universal connector (UC series) as connections environment, is a low cost but ideal tool for learning.OPTIONAL ACCESSORIESUC Series, the universal connector socket family

• Size: 112mm x 170mm approx

Kotech Export are the active Bread Board Circuit Lab manufacturers which are used for elementary as well as advance training of analog electronics. Our bread board circuit lab trainer covers regular analog circuits by solder less inter connections through use of 2 mm brass terminations & patch cords along with inbuilt AC & DC regulated power supply.

Basic trainer for students to perform basic experiment of digital electronics, Glass Epoxy PCB used as front panel of 300mm x 220mm & mounted on light weight shock proof plastic cabinet, On board power supplies & pulse generatorclock & Bread board mounted, Supplied with connecting wires.

• Model: HV-EXP847

Soldering machine Heating Method Pulse heatPower requirement 220V AC 5060HZ 2KVAOperating Ambient 23-40cSystem type table tabPulse Heating SpecificationTemperature ramp Profile 4 stagesPreset Start Temperature 30c to 300cPreset Ramp Temperature 30cto 450cPreset Release temperature 30-450cPreset hold period 1-100secondsRamp Period 1-25 seconds, term ode specification, Bonding force 1kgf-40kgf, thermocouple type K typeMaximum thermode size 55mmX3MMDimension 700mm(L) X600mm(W)x480mm(D)KIRSTEN soldering AG( KIRSTEN hollow jet-wave soldering machine, type K5000K7000)NUERA 16 CV Wave Soldering Machine

• Working Area: 600x900x150mm
• Table Size: 1270x870x710 mm
• X, Y, Z Traveling Positioning Accuracy: +-0.01/300mm
• X, Y, Z repositioning Accuracy: +-0.03mm
• Table Surface: T-slot Extrusions with water tank
• Y Structure: Hiwin Rail Linear Bearings and Ball Screw
• Max. Power Consumption (Without spindle): 0.8 kW
• Max. Rapid Travel Rate: 6000mm/min
• Max. Working Speed: 4000mm/min
• Spindle Power Motor: 1.5KW / 2.2KW / 3.0KW
• Spindle Speed: 0 - 24000 RPM
• Power Factor: AC220V/50/60Hz
• Flash Memory: 128M( U Disk)
• Operating System: Mach3 / DSP / NC studio

• Supportive Speed: 10 Mbps
• Number Of Ports: 1
• Pack Type: Box
• Interface: RS-232C
• Serial Protocols: EIA-232

• Features: Optical Breadboard with Stand, Rigid leveling system, Hard rubber support provides on four corners
• Item Code: PLE208
• Material: Steel
• Minimum Load Capacity: 400 kg
• Maximum Load Capacity: 900 kg
• Support Pad Diameter: 10 cm
• Channel Size: 4 inch x 1.5 inch

• Supportive Speed: 10 Mbps
• Number Of Ports: 1
• Pack Type: Box
• Interface: RS-232C
• Serial Protocols: EIA-232

• Power: AC Mains
• Type: Digital
• Usage/Application: Laboratory
• Model Name/Number: AE 831
• Material: Metal
• Phase: Single
• Power Supply: ac mains
• Material: Poly Propylene sheet.
• PCB size: 250mm×300mm(10"×12").
• Heating: Finned heaters with thermostat controls.
• Fan: For air circulation.
• Timer: 0-15min