Engineering Training Equipment Dealers in Ambala Cantt, Ambala

We are offering ripple tank. The ripple tank is a device, used to illustrate the laws of wave phenomenon, using ripples on the surface of water as the prototypes of all transverse waves. The ripple tank effectively illustrates important wave motions like rectilinear and circular and can demonstrate refraction, diffraction and interference of water waves. In addition, the ripple tank is equipped with a transparent refraction plate, wooden wave roller, one pack of rubber bands, water dropper, sponge, illuminator, hand stroboscope, and suitable power supply. The ripple tank is supplied with instruction manual. specifications size of the tank: 595x510x70mmtwo straight obstacles 130mm longone straight obstacle 40mm longcurved reflector 200mm radius

• Material: Stainless Steel
• Frequency: 50 Hz
• Voltage: 220V - 380V
• Application: Physics Lab
• No Of Legs: 4 Legs

We are offering crookes radiometer. We offer you competitive rates for crooke's radiometers, spectrum analysis tubes, entomological pins, glass hydrometers, induction coils, van de graaff generators, optics prisms for microscopes, 100x oil immersion objectives,.

• Electricity Supply: I Phase, 220 V AC, 2 Amp

Thermal Conductivity Of Liquids The present apparatus is designed to determine thermal conductivities of different liquids. The apparatus consists of a heater The heater heats a thin layer of liquid. A cooling plate removes heat through liquid layer, ensuring unidirectional heat flow. Temperature is measured across the liquid layer and complete assembly is properly insulated. A proper arrangement for changing the liquids is provided. The whole assembly is kept in chamber. Experiments Determination of Thermal conductivity of different liquids and to make a comparative study Study of variation of thermal conductivity of different liquids with temperature Utilities Required Water supply 5 litmin (approx.) Drain. Electricity Supply: I Phase, 220 V AC, 2 Amp. Table for set-up support .

• Brand Name: Nagra
• Material: Mild Steel
• Pack Type: 1 pc

Being a prominent Manufacturer, Supplier and Exporter in the industry, we present a wide range of Seed Sampling Parkhi to our customers. The quality we offer is unmatched. We take special care of quality by matching it against the highest parameters of quality set by the industry. We provide it in safe packaging at affordable rates. The range of offer enjoys durability and high performance.   Specifications Used for collecting small quantity of sample from a lot of cereals. Made of brass, available in different sizes. 6737 - 6” 6738 - 9” 6739 - 12”

• Features: High Strength, Superior Finish
• Packaging Type: Packet
• Resistivity: Rust Resistant
• Material: Metal
• Color: Silver

Plug key one way :- Made of brass blocks on heavy Bakelite base.   Plug Key two way :- Made of brass blocks on heavy Bakelite base.   Plug key 4 way ;-  Made of brass blocks on heavy Bakelite base.   Plug key 6 way :-  Made of brass blocks on heavy Bakelite base.

• Application: Colleges
• Driven: Electric
• Color: White

1/4 HP open type belt driven compressor with motor, fan cooled condenser, fan-cooled evaporator, two check valves, two capillary tubes, reversing valve switch, filter-drier – dual flow, high pressure control, main circuit breaker, duplex receptacle, compressor switch, pilot light, evaporator fan speed control, hardware kit, cold box and courseware. The unit is supplied with a mobile storage cabinet of code-gauge furniture stock steel with 4-inch swivel rubber-tired casters. The unit is charged with R-134a HFC refrigerant.

Always a popular lab/demo sequence-waves in a ripple tank! Proven method for studying numerous wave/optics principles. This sturdy ripple tank is made of molded plastic and features a viewing area larger than other ripple tanks. Its bottom is made of high-quality plate perspex to assure projection of distortion-free wave images. Special angled foam beaches around the perimeter of the tank greatly reduce unwanted reflections. The rippler unit consists of a 3-volt motor mounted on a rippler bar that can generate both straight and circular waves. The motor is equipped with a movable counterweight for varying wave amplitude. The complete apparatus includes four foam beaches, one light source support rod, one rippler bar with hangers, one rippler motor, one parabolic reflector, one glass plate, three barriers, four detachable legs. 

• Usage: Lab
• Model: GWL811
• Features: Superior Finish
• Packaging Type: Packet
• Resistivity: Rust Resistant
• Material: Metal

One Way: Two brass blocks 9 mm thick with brass terminals mounted on a 80 x 55 bakelite base. Accurately tapered plug with bakelite moulded top is fitted into the gap between the brass blocks.    Two Way: same as above with three brass blocks on a 180 x 52 mm base. . 

We always make use of quality raw materials for the production of our products as we comply with all set quality standards. Our product is available in nontoxic and industrial-grade packaging materials that ensure the products are safe from damage and reach buyers in brand new conditions.

• Feature: Durable
• Automatic Grade: Automatic
• Pressure: Medium
• Electric Supply: 230 +/- 10 VAC, 50 Hz, 1 phase.
• Water Supply: Distilled Water supply @10 Liters
• Air Supply: Clean Oil and moisture free air, pressure 2 bar, consumption 50 LPH.

Flow Control Trainer that we offer is manufactured as per the international quality standards to ensure supreme quality. It is specially designed to manage principles of flow control. We make available Flow Control Trainer with different technical specifications to meet the diverse demands of buyers. Our Flow Control Trainer can be connected with computer through USB for monitoring the process of flow control. We provide Flow Control Trainer within the stipulated time frame.Working of Flow Control Trainer :The process setup consists of supply water tank fitted with pump for water circulation A DP transmitter is used for flow sensing which measures differential pressure across orifice meter. The process parameter (flow) is controlled by microprocessor based digital indicating controller, which manipulates pneumatic control valve through I/P converter.The control valve is fitted in water flow line. These units along with necessary piping are fitted on support housing designed for tabletop mounting.Range of Experiments: Study of open loop response (Manual control) Study of on/off controller Study of proportional controller Study of proportional integral controller Study of proportional derivative controller Study of proportional integral derivative controller Tuning of controller (Open loop method) Tuning of controller (Closed loop method) Tuning of controller (Using Auto Tuning method) To study stability of the system (Bode plot)

The ripple tank is a device to illustrate the laws which govern all wave phenomenon using ripples on the surface of water as the prototypes of all transverse waves. It illustrates important wave motions like rectilinear and circular. It can also demonstrate refraction, diffraction, and interference of water waves. Tank is supported by four legs having levelling screws. Size of tank is 595 x 510 x 70 mm supplies complete with rippled assembly, two straight obstacles 130 mm long, one straight obstacle 40 mm long, curved reflector 200 mm radius, transparent refraction plate, wooden wave roller, one pack of rubber bands, water dropper, sponge, illuminator, hand stroboscope and suitable power supply. It is supplied with instruction manual.

• Material: Metal & Plastic
• Shape: Square
• Color: Available in Many Colors
• Power Source: Electric
• Application: Physics Lab
• Type: Ripple
• Phase: Single Phase
• Country of Origin: India

The unit comprises a shallow tank with a scratch-resistant acrylic window on the bottom, supported by four adjustable legs. Two arms on the side hold an eccentric motor and bar assembly. The motor and bar assembly is suspended by springs so the vibration is not transmitted to the tank.    A bright point light source is held overhead, which shines down through the water in the tank, and casts a shadow of the waves on the bench below. 

• Model: HTL003

It is a super-conducting device and involves the transfer of heat by boiling and condensation of a fluid and hence transfer of heat takes place under nearly isothermal condition. In this apparatus the comparison of heat pipe with the copper pipe as good conductor of heat and with the stainless steel pipe as same material of construction is made. It consists of three identical cylindrical conductors In respect of geometry. One end of these is heated electrically while there are small capacity tanks acting as heat sinks at the other end. The unit consists of a heat pipe a copper pipe and a stainless steel pipe. Temperature sensors are embedded along the length to measure the temperature distribution and the heat transfer rate is noted in terms of the temperature rise in the heat sink tanks.

• Available in size: 595 x 510 x 70 mm
• Features: Consists of an enameled M.S sheet frame with four adjustable legs.,Complete with all the accessories and working instruction.,Quality tested,Highly demanded,Durability
• specification: A Ripple tank is a shallow glass tank of water used in schools and colleges to demonstrate the basic properties of waves.It is a specialized form of a wave length.The ripple tank is usually illuminated from above, so that the light shines through the wate

• Country of Origin: India
• Port: ICD,TKD
• Supply Ability: 300 Piece/Pieces per Month
• Packaging Details: HARD WOOD PACKING

Backed by vast experience and comprehensive knowledge, we have developed our expertise in the design and development of high quality and precision Seed Lab Equipment. Our wast range of seed lab equipment consist seed dryer, seed germinator, seed blower etc.

• Brand Name: Scientico
• Current Type: AC
• Frequency: 50 Hz
• Features: Corrosion-resistance, High operational fluency , Easy to operate
• Item Code: HT-03
• Material: Mild Steel
• Water supply: 5 lit/min
• Electricity Supply: 220 V
• Current: 2 Amp