Crookes Radiometer
Get Price Quote
Partly evacuated glass bulb 65 mm diameter containing a set of 4 mica vanes mounted on a pivot, one side of each vane blackened and reverse side is kept bright. When exposed to sunlight or bright lamp, the rotor rotates rapidly. Mounted on stand.
Ripple Tank Apparatus
Get Price Quote
A specially designed versatile apparatus for the investigation of the wave properties, such as wave propagation, reflection, refraction, diffraction and interference. Permits demonstration with an overhead projector or use as a free standing bench model, allowing investigations to be carried out directly. Comprises a rectangular plastic tank with clear bottom and sloped sides incorporating beach effect to eliminate unwanted reflections. The tank has four detachable legs mounted at its underside at the corners with a hole in the clear tray for water drainage. One end of the tank has clamps for supporting lamp holder with a pair of clamps on each side for mounting rippler support rods. Rippler assembly comprises of a rectangular plastic rod with series of holes suitable for mounting spherical dippers and a low voltage DC motor having eccentric cam attached to its shaft to produce oscillatory motion. Supplied complete with following accessories: Illuminant Assembly Set of 4 barriers – a pair of bigger L-shaped (75×25mm) and a pair of smaller L-shaped barrier (25×25mm) 1 Curved Barrier, 2.5cm high, with uniform radius of curvature 1 Hand Stroboscope 1 Convex Lens 1 Concave Lens 1 Rectangular Block 2 Spherical Dippers Spare Elastic Cords for suspending rippler assembly.
Best Deals from Engineering Training Equipment
Crookes Radiometer
200 Per Piece
100 Piece (MOQ)
Ripple Tank Apparatus
Get Price Quote
Our products are the perfect blend of unique, and economical, and we offer top-quality products to the clients. We are one of the reputed manufacturers and exporters of Ripple Tank Apparatus, and we excel in offering the finest range of products at competitive rates in the market. Our unique range of products is manufactured using top-quality raw materials, and its USP is that it promises longer functional life, low maintenance cost, and smooth functioning. We are located in Ambala, Haryana, India. Details : A wooden framed tray with sloping position inside to minimize unwanted reflection from the sides of the tank with perspex plastic base and 4 detachable legs. Overall size of tray 600x520x55mm deep. Support rod with 'G' clamps are provided for using to carry waves generating system. Four metal barriers ( reflectors) consisting of a pair of straight barrier 150x25mm chord barrier of 215mm chord length x 25mm high and a short, straight barrier. Ripples are produced by a small 1.5 to 4.5V DC electric motor mounted on a 330mm wooden bar having a row of holes to mount spherical dipper, complete with 12 V illuminator with clamp. Model Number : GP-567.1
Two Way Plug Key
Get Price Quote
100 Piece (MOQ)
Drain Plug Key
Get Price Quote
We always make use of quality raw materials for the production of our products as we comply with all set quality standards. Our product is available in nontoxic and industrial-grade packaging materials that ensure the products are safe from damage and reach buyers in brand new conditions.
Crookes Radiometer
Get Price Quote
We are offering crookes radiometer. We offer you competitive rates for crooke's radiometers, spectrum analysis tubes, entomological pins, glass hydrometers, induction coils, van de graaff generators, optics prisms for microscopes, 100x oil immersion objectives,.
Seed Bag Trier
80 - 100 Per Each
1 Piece (MOQ)
Ripple Tank Apparatus
Get Price Quote
The newest Ripple Tank, with its sloped plastic surrounds and revolutionary wave dampers, produces clear wave patte without interfering wave reflections from the side. The bright low voltage, White LED enables the wave patte to be projected onto any white surface placed below the tank and these patte s are clearly visible, even without darkening the room. Accsories Included 1 Ripple Tank Base 4 Support legs for base 2 Support arms (to hold rods that support the lamp and wave generator) 1 Electrical wave generator with rheostat control box and cell holder. 1 Support rod for wave generator 2 Light, Metal spring (to suspend wave generator from support rod) 1 LED diode on Arm (Use a 5V1amp. power source) 2 Straight metal barrier/reflectors 1 Short metal barrier 1 Concave/Convex metal reflector 1 Clear Plastic double convex lens 1 Clear Plastic double concave lens 1 Clear Plastic Rectangular Prism 1 Hand held stroboscope, with holder surface
construction laboratory equipment
Get Price Quote
Consists of M.S.Cylindrical container 150mm 0.5mm dia x 130mm to 140mm high with base plate 200 to 230 mm.sqr x 6mm thick. Material Testing Lab equipment manufacturers,exporters and Material Testing Lab suppliers A plinger of 148mm ± 0.5mm dia x 100 to 115mm high. Supplied complete with tamping rod, 16mm dia x 600mm long, one end rounded. 1 No. Metal measure 115 ± 0.5mm dia x 180 0.5mm high. civil lab equipments manufacturers.
Heat Pump Training Kit
120,000 Per Piece
1 Piece(s) (MOQ)
1/4 HP open type belt driven compressor with motor, fan cooled condenser, fan-cooled evaporator, two check valves, two capillary tubes, reversing valve switch, filter-drier – dual flow, high pressure control, main circuit breaker, duplex receptacle, compressor switch, pilot light, evaporator fan speed control, hardware kit, cold box and courseware. The unit is supplied with a mobile storage cabinet of code-gauge furniture stock steel with 4-inch swivel rubber-tired casters. The unit is charged with R-134a HFC refrigerant.
Ripple Tank
4,800 Per Piece
1 Piece (MOQ)
The unit comprises a shallow tank with a scratch-resistant acrylic window on the bottom, supported by four adjustable legs. Two arms on the side hold an eccentric motor and bar assembly. The motor and bar assembly is suspended by springs so the vibration is not transmitted to the tank. A bright point light source is held overhead, which shines down through the water in the tank, and casts a shadow of the waves on the bench below.
Ripple Tank
Get Price Quote
The ripple tank is a device to illustrate the laws which govern all wave phenomenon using ripples on the surface of water as the prototypes of all transverse waves. It illustrates important wave motions like rectilinear and circular. It can also demonstrate refraction, diffraction, and interference of water waves. Tank is supported by four legs having levelling screws. Size of tank is 595 x 510 x 70 mm supplies complete with rippled assembly, two straight obstacles 130 mm long, one straight obstacle 40 mm long, curved reflector 200 mm radius, transparent refraction plate, wooden wave roller, one pack of rubber bands, water dropper, sponge, illuminator, hand stroboscope and suitable power supply. It is supplied with instruction manual.
Ripple Tank
Get Price Quote
We are offering ripple tank. The ripple tank is a device, used to illustrate the laws of wave phenomenon, using ripples on the surface of water as the prototypes of all transverse waves. The ripple tank effectively illustrates important wave motions like rectilinear and circular and can demonstrate refraction, diffraction and interference of water waves. In addition, the ripple tank is equipped with a transparent refraction plate, wooden wave roller, one pack of rubber bands, water dropper, sponge, illuminator, hand stroboscope, and suitable power supply. The ripple tank is supplied with instruction manual. specifications size of the tank: 595x510x70mmtwo straight obstacles 130mm longone straight obstacle 40mm longcurved reflector 200mm radius
Ripple Tank Apparatus
Get Price Quote
Always a popular lab/demo sequence-waves in a ripple tank! Proven method for studying numerous wave/optics principles. This sturdy ripple tank is made of molded plastic and features a viewing area larger than other ripple tanks. Its bottom is made of high-quality plate perspex to assure projection of distortion-free wave images. Special angled foam beaches around the perimeter of the tank greatly reduce unwanted reflections. The rippler unit consists of a 3-volt motor mounted on a rippler bar that can generate both straight and circular waves. The motor is equipped with a movable counterweight for varying wave amplitude. The complete apparatus includes four foam beaches, one light source support rod, one rippler bar with hangers, one rippler motor, one parabolic reflector, one glass plate, three barriers, four detachable legs.
Flow Control Trainer
Get Price Quote
Flow Control Trainer that we offer is manufactured as per the international quality standards to ensure supreme quality. It is specially designed to manage principles of flow control. We make available Flow Control Trainer with different technical specifications to meet the diverse demands of buyers. Our Flow Control Trainer can be connected with computer through USB for monitoring the process of flow control. We provide Flow Control Trainer within the stipulated time frame.Working of Flow Control Trainer :The process setup consists of supply water tank fitted with pump for water circulation A DP transmitter is used for flow sensing which measures differential pressure across orifice meter. The process parameter (flow) is controlled by microprocessor based digital indicating controller, which manipulates pneumatic control valve through I/P converter.The control valve is fitted in water flow line. These units along with necessary piping are fitted on support housing designed for tabletop mounting.Range of Experiments: Study of open loop response (Manual control) Study of on/off controller Study of proportional controller Study of proportional integral controller Study of proportional derivative controller Study of proportional integral derivative controller Tuning of controller (Open loop method) Tuning of controller (Closed loop method) Tuning of controller (Using Auto Tuning method) To study stability of the system (Bode plot)
plug key
Get Price Quote
500 Pieces (MOQ)
One Way: Two brass blocks 9 mm thick with brass terminals mounted on a 80 x 55 bakelite base. Accurately tapered plug with bakelite moulded top is fitted into the gap between the brass blocks. Two Way: same as above with three brass blocks on a 180 x 52 mm base. .
Ripple Tank Apparatus
2,200 Per Piece
Seed Sampling Parkhi
Get Price Quote
Being a prominent Manufacturer, Supplier and Exporter in the industry, we present a wide range of Seed Sampling Parkhi to our customers. The quality we offer is unmatched. We take special care of quality by matching it against the highest parameters of quality set by the industry. We provide it in safe packaging at affordable rates. The range of offer enjoys durability and high performance. Specifications Used for collecting small quantity of sample from a lot of cereals. Made of brass, available in different sizes. 6737 - 6” 6738 - 9” 6739 - 12”
plug key
Get Price Quote
1 Piece (MOQ)
Plug key one way :- Made of brass blocks on heavy Bakelite base. Plug Key two way :- Made of brass blocks on heavy Bakelite base. Plug key 4 way ;- Made of brass blocks on heavy Bakelite base. Plug key 6 way :- Made of brass blocks on heavy Bakelite base.