Fume Hood Dealers in Ambala

• Size: 10ft, 6ft
• Material: Stainless Steel
• Shape: Rectangular
• Application: Laboratory Use
• Finishing: Polished
• Height: 5ft, 6ft

Fabricated out of thick wooden board. It designed so as to throw out all toxic/harmful vapors & fumes thus protecting costly instruments and the persons working in the lab. Outer is finished with sunmica and inner epoxy painted. Working table top is acid/alkali resistant and a small wash basin with connections provide for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work on 220 A.C. 50Hz supply.Optional Accessories : High CFM exhausts System (for duct exceeding 10 feet in length) S.S. Lining on work bench PVC Fume Duct (per ft.) Available in : MILD STEEL Powder Coated Stainless Steel Wooden. Industries where this product used :Institutes, Medical Colleges, Industries, Pharmacy colleges and Industry, Laboratories, Pharmaceutical Industry, Hospitals

• Brand Name: Radical
• Material: Stainless Steel
• General Use: The work surface of granite is fitted with small wash basin & good quality tap. A gas cock is also f

Fume Hood Complete Stainless SteelThe work surface of granite is fitted with small wash basin & good quality tap. A gas cock is also fitted.  Sliding sash made of Polycarbonate / toughened glass moves vertically up and down with concealed counter balanced weights.  Chamber is fitted with 36W poly-carbonate fluorescent light assembly. Space underneath the work surface is provided with storage compartment.  15/5 Amp socket with switches is provided for light and exhaust system. Supplied with cord and plug to work on 220 volts 1/3 phase 50Hz A.C.  Complete with motor blower for exhaust system and Duct to take out fumes. Fume Hood frame of S.S. 304 grade from outside & 316 grade inside. Model Particular:  RH-60-01 Size 90x60x60cm RH-60-02 Size 120x60x60cm RH-60-03 Size 120x75x75cm RH-60-04 Size 150x75x75cm

We bring forth highly efficient Fume Hoods for the laboratories across the country and abroad. We are enlisted with the eminent Manufacturers, Exporters, and Suppliers of Fume Hoods from Haryana, India. These large pieces of equipment that we offer are made of wide wooden boards. They are designed and developed in absolute adherence to quality norms, so as to reduce the exposure of toxic vapors. Details : Outer finish is done with sun mica and inner with epoxy paintWorking table top is fitted with acid/alkali-resistant tiles and a small wash-basin with connections provided for inlet and outlet of waterThe front door moves vertically up and down with concealed counter balanced weightThe unit is fitted with fluorescent light and a gas cock for gas/air supplyThe space under the work station can be provided with storageCompartments for storage purpose at an extra cost (see Optional Accessories)The front-facing panel is fitted with 15/5 Amp socket and with switches for exhaust system and fluorescent light to work on 220/230 Volts A.C. Supply

SITRO scientific is a leading manufacturer company of "FUME HOOD". We can provide you best quality product at very competitive price.

Made of Mild Steel duly powder coated. Granite Working Platform. High-Speed Centrifugal Blowers. Front Sash with counterweights. Fluorescent illumination lights. Water tap and PP sink. Provision for gas and air Connection Storage cupboard. 15/5 Amp Switches and Socket.  Working Area Size 90x60x60cm.Working Area Size 120x60x60cm.Working Area Size 120x75x75cm.

• Size: 4ft, 5ft, 6ft
• Type: Automatic
• Material: Metal
• Shape: Rectangular
• Application: Laboratory Use
• Finishing: Polished
• Warranty: 1 Year

Fume exhaust hoods are designed to contain and throw out toxic, obnoxious, pungent smelling gases to protect personnel and equipment in the laboratories. A motor driven dynamically balanced blower with minimum vibration and noise level, creates negative pressure and sucks contaminated air from work area and throws the same in high-up atmosphere through ductings. Fabricated out of thick ply-board clad from outside in laminated sheet and inside Finished in non-corrosive, chemical resistant EPOXY paint. An up-down sliding sash made of Teak wood mounted in thick glass sheet is provided. Fluorescent lighting provided in the chamber. A gas tap and a power plug is also provided. Stainless steel wash basin and suitable water tap is also provided. A work bench with cup-board with Drawers are provided to hold the hood at a suitable level from ground.

We are into a business of manufacturing and offering the clients with huge range of fume hoods that is fabricated out of thick wooden board. It designed to throw out all toxicharmful vapours & fumes and hence protecting costly instruments and the persons working in the lab. Outer wall is finished with sunmica and the inner portion with epoxy paint. Moreover, the working table top is acidalkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with fluorescent light and a gas cock for gasair supply. The front facing panel is fitted with 155 amp socket with switches for exhaust system and fluorescent light. It works on 220 volts ac. 50 hz supply. features: easy installation high load bearing capacity shear strength

• Approx. Price: Rs 1.25 Lakh / Piece
• Size: 1200/1500/1800*800*2350mm
• Application: Chemisty Lab
• General Use: Commercial Furniture

Buyers can order our products in bulk, as we maintain year around availability. In addition, we have reliable transportation system to make timely delivery. By making use of quality packing material and with the assistance of our experts, we are able to meet diverse packaging requirements of the clients with ease. Thus, we make sure zero damage at client's end. Laboratory Fume Hood is made of the finest quality metal with a protective polish on the surface for rust resistance. 

Lyzer Fume Hood cabinet: Fabricated out.of thick c.r.c.a. sheet OR Wooden Board, double chamber, outer triple layer enamel painted and inner finished in apoxy & lined with compressed a asbestos sheet with strong blower exhaust system, light arrangement & counter balanced sliding sash. To work on 220 / 230V AC 50 Hz. Power plug with socket provided.Size- Wdt. Dpt. Ht. Exhaust Duct No. 12201 4' x 2.6'x 31/2'           3" dia02 5' x 3' x 31/2'             4"03 6' x 3' x 31/2'             4" 

Fume Exhaust Hoods are designed to contain and exhaust toxic, obnoxious harmful vapours, mists etc. particularly for protecting laboratory personnel and equipment. A motor blower system generates negatives pressure within the encloser extracting the contaminated air from the work area and expels it into the outside atmosphere. Highly recommended in different laboratories like biochemistry, soil test, food microbiology pharmaceuticals units, printed circuit board etching and cleaning operations, miniature component assembly etc. These are capable of handling corrosive fumes of sulphuric & Hydrochloric acid etc. CONSTRUCTION: Fume Hoods are made of Stainless Steel 304 grade from outside with working space covered with stainless steel 316 Qlty. Acid resistant. The work surface is fitted with small wash basin of size 250 x 200 x 150 mm depth of Stainless Steel 316 Qlty. with good quality tap. A gas cock is also fitted for gas supply. A sliding slash made of glass moves vertically up and down with concealed counter balanced weight. Chamber is provided with Flourescent Lighting arrangement for easy working. The space underneath at the work-station is provided with storage compartment for proper uses. The front fascia is provided with a panel incorporating 15/5 Amp. socket with switches for light and exhaust system supplied with cord and plug to work on 220/440 Volt 1/3 phase 50 Hz A.C. Front opening of the Fume Hood will be H 585 x W 910 mm. Complete with Exhaust System having 38mm exhaust fan with stainless. steel deck & Duct to take out fumes

Working Chamber Size   3' x 2' x 2'  4' x 2'x 2'   5' x 2 1/2' x 2 1/2'   OPTIONAL:-   (i) High CFM exhaust System (for duct exceeling 10 feet in  length)   3' x 2' x 2'    4' x 2'x 2'      5' x 2 1/2' x 2 1/2'    (ii) S.S. Lining on work bench                                                              3' x 2' x 2'    4' x 2'x 2'       5' x 2 1/2' x 2 1/2'    (iii) PVC fume DUCT (Pert)                                                                 3' x 2' x 2'    4' x 2'x 2'        5' x 2 1/2' x 2 1/2' 

• Condition: New
• Usage/Application: Laboratory use
• Brand Name: MOHIT SCIENTIFIC WORKS
• Automation Grade: Semi-automatic

• Material: Mild Steel
• Brand Name: Fume Hood
• Usage/Application: Release Of Hazardous Substances
• Voltage (V): 240 V
• Dimensions: 3 x 3.5 x 5 ft (L X W X H)
• Temperature: 300 Degree Celcius
• Frequency (Hz): 50 Hz
• Power Source: Electric

• Working Area: 2' x 2' x 2' , 3' x 2' x 2'

Fume Hood Wooden with sunmica. basic unit with table, with F.R.P. wall lining, flourscent light, complete with exhaust system, fume duct PVC (PRF).

We are a giant Manufacturer and Supplier of Fume Hood in Haryana, India. We offer it in various sizes and dimensions, to meet the variegated requirements of our clients. These hoods are widely used in various laboratories for keeping the harmful vapors out of the laboratory area. These hoods are easy to install and demand a negligible maintenance. We use the quality-approved components and updated techniques for fabricating them. These hoods are manufactured in adherence to the latest industrial standards and norms.

We Manufacture Fume Hood that is fabricated out of thick wooden board. It is designed so as to throw-out all toxic/harmful vapors & fumes thus protecting costly instrument and the persons working in the lab. Outer part is finished with Sunmica and inner is epoxy painted. Working table top is acid/alkali resistant and a small wash basin with connections provided for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. The space beneath the work station is provided with storage compartment for general purpose. It is ideal to work on 220/230 volts A.C. Supply. Working Chamber Size3’ x 2’x 2’4’ x 2’x 2’5’ x 2 ½â€™x 2 ½â€™ OptionalHigh CFM exhaust system (for duct exceeding 10 feet length) S.S. Lining on work benchPVC Fume Duct (per ft.)

• Country of Origin: India
• Material: Stainless Steel
• Application: Laboratory
• Color: Silver
• Condition: New
• Finishing: Polished

• Power Source: Electric
• Speed: 1440 RPM
• Frequency: 50/60 Hz
• Voltage: 220/230V AC
• Phase: Single Phase

• Size: 4ft
• Material: Metal
• Shape: Square
• Application: Laboratory Use
• Finishing: Polished
• Height: 5ft