Heat Exchangers Dealers in Ambala

IT consist of three concentric pipes, at the axis of which a cartridge heater is positioned

• Country of Origin: India

We offer heat transfer equipment. Experiments:-  to determine total thermal resistance and thermal conductivity of composite wall.  to plot temperature gradient along composite wall structure.  slab assembly arranged symmetrically on both sides of heater • slab material : slab size • cast iron : 250 mm dia. & 20 mm thick • bakelite : 250 mm dia. & 15 mm thick • press wood : 250 mm dia. & 12 mm thick • heater : nichrome wire  temperature sensors : rtd pt-100 type (8 nos.)  control panel : digital voltmeter : 0-300 vol., digital ammeter: 0-2 amp. variac : 0-230 v / 2 amps. digital temperature indicator: 0-200o c with multi- channel switch, on/off switch, mains indicator etc.  cabinet to accommodate the slab assembly, with front window of glass/acrylic.  the whole set-up is mounted on a powder coated base plate.

• Weight: 100-1000kg
• Voltage: 220V
• Automatic Grade: Automatic
• Warranty: 1 Year
• Driven: Electric
• Required Floor Area: 2 m x 0.6 m
• Required Water Supply: 10 Ltrs./Minute (approx.) and drain
• Required Electricity Supply: 1 Phase, 220 V AC, 3 kW.

Manufactured using high grade components, avail from us high quality Counter Flow Heat Exchanger. Counter Flow Heat Exchanger is widely used for transferring heat from one fluid to another. Counter Flow Heat Exchanger we offer has earned wide appreciation in the market for its high efficiency, consistent performance and longer service life.About Counter Flow Heat Exchanger : Comprises of a concentric tube heat exchanger Hot water flows by means of inner tube in one direction only and cold water flows over the inner tube to outer tube Direction of cold fluid flow can be changed from parallel or counter to hot water so that unit can be operated as parallel or counter flow heat exchanger Rotameters are used for measuring flow rates of hot and cold water Magnetic drive pump is used for circulation of the hot water from a re-cycled type water tank that is equipped with heater and Digital temperature Controller Experiments :To calculate the following parameters both for parallel and counter flow arrangement : For calculating the LMTD For finding heat transfer rate Overall heat transfer co-efficient For comparing the performance of both Parallel and Counter flow heat exchanger  

• Application: Colleges
• Driven: Electric
• Color: White

1/4 HP open type belt driven compressor with motor, fan cooled condenser, fan-cooled evaporator, two check valves, two capillary tubes, reversing valve switch, filter-drier – dual flow, high pressure control, main circuit breaker, duplex receptacle, compressor switch, pilot light, evaporator fan speed control, hardware kit, cold box and courseware. The unit is supplied with a mobile storage cabinet of code-gauge furniture stock steel with 4-inch swivel rubber-tired casters. The unit is charged with R-134a HFC refrigerant.

• Features: High performance Superior design Low power consumption User-friendly functions Used high quality raw material Economic prices

Composite Walls Apparatus We are engaged in offering high quality Composite Walls Apparatus to the esteemed customers These apparatuses are manufactured using genuine raw material, under the able guidance of our team of experts. Moreover, we make sure to timely deliver the ordered products at the customers' end, via our wide distribution network.

• Weight: 10-20kg, 30-40kg
• Voltage: 110V, 220V
• Condition: New
• Power: 0-100W, 100-200W, 200-400W
• Driven Type: Electric
• Temperature Range: 0-5 Deg C, 10-20 Deg C, 5-10 Deg C
• Warranty: 5yrs
• Ambient: 0-180 Deg C 180-360 Deg C

• Usage: Industrial

• Brand Name: JLab
• Model Number: JLab45
• Place of Origin: India

The setup consists of a heater sandwiched between two sets of slabs. Three types of slabs are provided on either sides of heater, which forms a composite structure. Please visit www.jLabexport.com for bulk inquiries for more Instruments and Kits for Schools & Colleges. You can also get in touch with us at sales@jLabexport.com and 85699- 09696.

We are offering shell and tube heat exchanger water to water advanced technocracy inc. Is manufacturer, exporter & supplier of shell and tube heat exchanger water to water.

The plate heat exchanger is made up of profiled plates with water flowing through the spaces between them. The plates are soldered in such a way that two separate flow channels are formed. These are one “cold” and one “hot” flow channel, in an alternating arrangement. Hot and cold water flow continuously. Part of the thermal energy of the hot water is transferred to the cold water. Valves are used to adjust the flow of hot and cold water. The supply hose can be reconnected using quick release Couplings allowing the flow direction to be reversed. This allows parallel flow and counter flow operation. During experiments, temperature curves are plotted and displayed graphically. Additionally, the measured values can be recorded and processed using data acquisition software. The mean heat transfer coefficient is then calculated as a characteristic variable. The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments

The setup consists of a brass tube fitted in a rectangular duct in a vertical fashion. The duct is open at the top and bottom, and forms an enclosure and serves the purpose of undisturbed surrounding. One side of the duct is fitted with a transparent good quality Acrylic window for visualization. An electric heating element is kept in the vertical tube that in turns heats the tube surface. The heat is lost from the tube to the surrounding air by natural convection. The temperature of the vertical tube is measure by Temperature Sensors and displayed by a Digital Temperature Indicator with multi-channel switch. The heat input to the heater is measured by a Digital Ammeter and a Digital Voltmeter and is varied by a Variac. The tube surface is polished to minimize the radiation losses.

• Certification: ISO 9001:2008 Certified
• Warranty: Yes
• Heat Transfer Exchanger: Heat Transfer in Forced Convection
• Heat Transfer Exchanger: Heat Transfer in Natural Convection
• Heat Transfer Exchanger: Shell & Tube Type Heat Exchanger
• Heat Transfer Exchanger: Dropwise And Filmwise Condensation Apparatus

Product description:we hold specialization in the manufacturing, trading and exporting of premium quality parrallel & counter flow heat exchanger. Offered setup is designed to study the pipes in parallel of the same diameter. It consists of a set of 2 pipe test sections, supply tank, measuring tank and pump for closed loop water circulation. Our apparatus is appreciated globally for is dimensional accuracy, seamless finish and corrosion resistance. description: � heat exchanger is a device in which heat is transferred from one fluid to another. The apparatus consists of a concentric tube heat exchanger. Hot water flows through inner tube in one direction only and cold water flows through the outer tubes. Direct ion of cold fluid flow can be changed from parallel or counter to hot water so that unit can be operated as parallel or counter flow heat exchanger. Flow rates of hot and cold water are measured using rotameters. A magnetic drive pump is used to circulate the hot water from a re-cycled type water tank, which is fitted with heaters and digital temperature controller.

• Material: G.I.
• Length: 1000 mm.
• Capacity: 5 KW.
• Diameter: 25 mm.
• Features: High efficiency,Longer service life.,Low maintenance.

These equipments can be availed for educational purposes in school, college and university labs as well as for industrial applications. Products are shipped from well-known traders to ensure time tested quality products. The setup consists of a heater sandwiched between two sets of slabs. Three types of slabs are provided on either sides of heater, which forms a composite structure.

• Features:: High performance, Long operational life, Less maintenance

ALPHA CHEM-1312  Fluidisation And Fluid Bed Heat Transfer Unit Application of fluidised beds is more widespread in industry than is usually appreciated, covering such diverse fields as power generation to food processing. The objective of the unit is to investigate the gas flow through a fixed and fluidised bed and to measure the heat transfer rate and coefficients for comparison with convective heat transfer rates in air.   Fluidisation takes place within a transparent chamber and the range of bed material supplied can be rapidly changed. Alternative locally sourced bed materials and air distributors can be easily utilised for student project work.   Fluidised Bed designed for educational studies and using air as the fluidising medium. The unit incorporates a glass chamber containing the bed material and an electric heater for heat transfer studies.   High quality glass reinforced plastic on which the following components are mounted:   Variable Transformer to vary the heater power input.   Volt and Ammeter to indicate the heater power input. Ranges 0 to 250 V amd 0 to 3 A.   Flow Meters to measure air flow through bed. Range 0.15 to 3.5 litres/sec.   Digital Thermometer to indicate the temperatures of heater surface, air inlet and probe. Resloution 1ºC.   Manometer to measure pressure drop through bed.   Safety Features include fusing and earthing of all components and heater temperature controller.   Experiments :   Observation of the behavior in a fluidised bed of a wide range of granular maerials, from onset of fluidisation to entrainment.   Measurement of air flow and pressure drop through a variety of granular materials, as packed and as fluidised beds.   Investigation of the effect of distributor design on bed behaviour.   Investigation of the effect of:   Superficial velocity   Depth of immersion   particle size   on surface heat transfer coefficient for a hot surface in a fluidised bed   Demonstration of separation by article size and density.   Specifications :   Column : Material Borosilicate Glass Dia. 80 mm. Total Length 500mm.   Cyclone Separator : Material Stainless Steel, Compatible Capacity with collector.   Air Circulation : By forced draft fan, Arrangement is done vary the air flow rate.   Heating Chamber : Compatible capacity   Heater : Nichrome wire heater   Temperature Sensors : RTD PT-100 type.   Control panel comprises of :   Digital Temp. Controller : 0 199.9°C (For Hot Air) Standard make on/off switch, Mains Indicator etc. Instruction Manual : An ENGLISH instruction manual will be provided along with the Apparatus

• Brand: Scientico
• Item Code: HT-08
• Material: Stainless Steel
• Electricity Supply: 220 V
• Frequency: 50 Hz
• Phase: Single Phase
• Current: 10 amp
• Floor area: 1.2 m x 0.5 m

• Type: Heat Transfer In Forced Convection
• Weight: 100-1000kg, 1000-2000kg
• Color: Blue, Brown, Grey, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: Good, New, Used
• Automatic Grade: Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Warranty: 1 Yr
• Warrenty: 1year

We are recognized as the premier manufacturers, traders and exporters of Heat Transfer Lab Equipments in India. With a vast experience and in-depth research we have been able to develop and design such Heat Transfer Lab Instruments that are easy to use and easy to understand. All the equipments are manufactured using utmost quality raw material using state-of-the-art technology. Our professionals yearn to develop such products that are durable, user friendly, low in maintenance and cost efficient. Working round the clock to provide client with the best of their requirements we promise to provide 100% customized products as per the needs of the

Microteknik is a reputed name in manufacturing and supplying business of Engineering Models brings you a variety of Heat Transfer Lab Equipments with unparalleled quality and competitive price range. Our products designed by our qualified team include: Heat Transfer Through Composite Wall, Thermal Conductivity of Insulating Powder, Heat Transfer in Natural Convection, Parallel FlowCounter Flow Heat Exchanger, Unsteady State Heat Transfer Unit, Heat Transfer in an Agitated Vessel.