Horizontal Autoclave Dealers in Ambala Cantt, Ambala

• Country of Origin: India
• Application: Laboratory
• Weight: 100-200kg
• Condition: New
• Power: 6-9kw
• Driven Type: Electric

• Type: Horizontal Autoclave
• Application: Hospital, Laboratory, Pharma Industry
• Weight: 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Color: Grey, Silver
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Warranty: 1year, 2years
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric, Hydraulic, Mechanical

We are the main supplier of this product.

We are offering All contact parts is made of S.S 316 with food grade joints silicon gasket load in trolley and with door safety locks. When door is in under pressure and jacket is provided for storage of steam and boiler is electric operated with heaters and digital temperature controlled and display pressure. Switch is provided for controlling of pressure and safety .Valve is provided for complete stainless steel. The sterilizer is based on the principle that microbiological action of saturated steam at elevated temp is rapid and thorough. All models work on downward displacement of air principle which is most economical method of obtaining for all types of bulk sterilization which are commonly needed in Medical, Agricultural and Pharmaceutical institute Suitable for sterilizing hospital dressings, linen, rubber plastic goods, surgical instruments, glassware’s and utensils etc. Construction Robust and rugged all weld construction which is leak proof unlike riveted construction. Inner chamber & Outer chamber is made of stainless steel of 304316 quality and jacket is made out of rolled steel. Sterilizers will have single door made out of rolled steel lined with S.S. sheet on both sides. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure. The steam jacket is lined on the outer side with asbestos sheet or glass wool which prevents heat losses due to radiation and is covered by strong rolled steel sheet duly painted.Boiler Made of thick stainless steel plate suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacementrepair. Fitted with water gauge glass for water level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut off device. This device protects the heater in the generator from burning out dry. The steam pressure in the boiler is indicated on an individual pressure Gauge. Safety Lock for Door Every horizontal rectangular sterilizer is fitted with SELF LOCKING SAFETY DOOR which cannot be opened when the chamber is under pressure. The Chamber Two separate valves provided for evacuating air and steam from inner chamber and jacket as and when desired. A steam trap is fitted in the chamber discharge line to eliminate the condensate automatically. Switch Box Houses the Pressure control switch, Main switch, Pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation.Technical specification S.S. Load & carry Transfer trolly. Watering type vacuum pump with S.S. condenser and starter. Automatic recording cycle with printer Microprocessor controller with fully automatic. Fully automatic printer thru. PC with graphical display. PLC Provided HMI PLC, HMI, sensors RTD and pressure transmitter, Pressure gauge etc would be reputed make. Other Features Triple Safety : The sterilizer is provided with triple safety. By a pressure control switch which automatically limits the pressure to the required set valve. Two spring loaded safety valves one each at chamber and boiler level. A dead weight safety valve at chamber level. A Plug Screen : Prevents the discharge line from choking. The plug is easily removable for routing cleaning. A powerful Ejector (for drying sterilized linen) circulates air through the chamber. The circulating air passes through a corrosion resistant metal wool filter. A Dial thermometer is provided to show the chamber temperature. Automatic Vacuum Breaker : Automatic Vacuum Breaker is provided to break vacuum case of vacuum formation due to steam condensation. Operating. Temperature and pressure : Sterilizing Temp. : 121°C. Sterilizing Pressure : 1.2 to 1.5 kgCm2, (15 psi to 22 psi) Optional Accessories ChamberJacket of S.S. 316 Door of S.S. 304316 Additional TrayShelves Carriage & Trolley Direct steam supply from centralized boiler Temperature recorder High pressure High vacuum model Additional door (Double door)

Cylindrical (triple walled) inner/outer chamber made of thick S.S. fitted with automatic pressure control switch and automatic low water level cut off device. Lid made of S.S. with radial lock to work on 440 volts 3 phase supply. 

Our Rectangular Autoclave is highly famous and is highly demanded by all. We supply our premium quality horizontal rectangular autoclave at one of the most affordable prices for everyone to avail them easily. We have also gained the position one of the preferred rectangular autoclave suppliers in India. Construction The unit has inner Chamber, Boiler, Lid and Jacket - all made of 304 grade stainless Steel, outer chamber of thick gauge mild steel. For controlling sterilization cycle, a three way valve or a multiport valve - made of S.S. is provided. It is supplied complete with vacuum breaker, water level indicator, steam trap and automatic pressure control switch. The whole unit is mounted on a robust tubular stand. It is available in the following standard sizes. Operatable on 3 Phase, 440 Volts A.C. Supply. Mode of Heating Electrically heated by special flange type/immersion type heaters bearing ISI mark, to work on 440 volts three phase 50 cycles. Working Pressure The pressure inside the chamber is variable from 5 psi. to 20 psi. But the normal recommended pressure for sterilization process is 1.2 kgf/cm sq.g (15 psi - 17 psi) Working Temperature : 121° C Hydrotest Pressure :

A versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins. but presented in a horizontal position and without steam jacket. The outer body made of mild steel, inner chamber made of stainless steel.

• Frequency: 60 Hz
• Material: Stainless Steel
• Mount Type: Floor Mounted Autoclave
• Voltage: 230 V
• Phase: 3 phase
• Sterilizing Pressure: 1.2 to 1.5 kg per cm2 (15 psi to 22psi)
• Power Requirement: 40 W

A versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of  thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a  jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi.   A drain cock has also been provided.  A double safety valve has also been  provided along with inlet. Supplied complete but without dressing bins. but presented in a horizontal position and without steam jacket.  The outer body made of mild steel, inner chamber made  of stainless steel.   Chamber Size in   Dia x Depth         Load        Capacity (approx.)   A. 400x600mm     6KW                 78ltrs.   B. 400x1100mm    9KW                162ltrs.   C. 500x900mm     9KW                 165ltrs.   D. 500x1200mm   9KW                 221ltrs.

• Power: 440volts, 3 Phase

Inner Chamber is made up of thick Stainless Steel Sheet and jacket is made out of rolled steel. Single door made of thick S.S. Plate and has radial locking system.Boiler is made of thick stainless steel sheet and is located under the sterilizer. Unit is fitted with water level indicator, safety valve, pressure gauge, water inlet and drain valves.

Our horizontal cylindrical autoclave are triple walled units. Outer body of our autoclave is constructed out of thick gauge stainless steel sheet of SS-304 grade. The inner chamber is also made of heavy gauge stainless steel sheet of SS-304 grade. The middle wall is also constructed from the strong and sturdy stainless steel sheet of ss-304 grade s stainless steel sheet. These are steam stocking models connected with a three way valve to control the sterilization cycle inside the autoclave. Our autoclaves are insulated by generous mineral glass ass wool insulation . The strong lid constructed out of thick stainless steel plate has a double safety radial locking arrangement , which ensures an easy and smooth opening and closing operation for all our autoclaves. The steam generator of the autoclave is also constructed from stainless steel sheet of grade ss-304.Our horizontal autoclaves are ideally suited for hospitals and research labs where safety is the first priority of the users, since it is equipped with a double safety steam release valve. At the same time we test all our autoclaves for up to 2.5 times the standard working pressure to ensure maximum safety and protection from any unfortunate incident. All our horizontal autoclaves are supplied complete with pressure gauge, pressure release valve automatic pressure control switch, vacuum breaker and steam trap as a standard feature. The unit is mounted on a tube stand constructed of high grade steel, which is duly pre treated with primers for rust proofing and painted with stove enamel.   Salient Features: Steam Stock Provision Versatile usage Stainless steel construction Ergonomic Design Energy Efficient Double Safety Radial Locking Arrangement Double Safety Valve Protection Hydraulic Testing Upto 2.5 times the working pressure Calibration And Protocol Documentation

• Supply Ability: 500 Piece/Pieces per Month
• Model Number: 0113361
• Place of Origin: India
• Port: ICD,TKD
• ANY: ANY
• Instrument classification: Class I, Class II, Class III

This is a double walled unit mounted horizontally on a sturdy, heavy mild steel tubular stand duly painted . the inner wall is made up of 18 SWG stainless steel sheet duly argon arc welded . outer wall is of thick s.s. plate and is provided with radial locking system which ensures complete risk free and leakproof sterilization . door when in operation or under pressure . pressure is adjustable from 10 to 20 p.s.i. fitted with pressure gauze. Safety valve and steam release valve. Horizontal autoclaves are available with or without s.s. boiler for units fitted with S.S. boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use re provided hydraulically tested up to 40 P.S.I. . automatic vacuum breaker is provided to break the vacuum in case of vacuum due to steam condensation . fitted with automatic pressure gauze control switch and automatic low water level cut off device. To work on 220 volt, A.C. supply; Available in following sizes:  Dia x Depth Load 350 x 550 mm 3 K.W 400 x 600 mm 4 K.W. 550 x 750 mm 7 K.W.

We are offering horizontal autoclave. Advanced technocracy inc. Is manufacturer, exporter & supplier of horizontal autoclave. Most ideal for any institute or laboratory doing bulk sterilizing and research work. This autoclave has double walled chamber and a boiler and these are mounted on a heavy duty mild steel stand. The inner made of thick stainless steel sheet and outer chamber is made of stainless steel mild steel sheet. Automatic self closing device to prevent opening of the door while the sterilize is in operation . Stainless steel steam generation unit fitted with easily replaceable heating element. Fitted with pressure control switch. Pressure setting range 10 t020 psi.

This is a double walled unit mounted horizontally on a sturdy, heavy mild steel tubular stand duly painted . the inner wall is made up of 18 SWG stainless steel sheet duly argon arc welded . outer wall is of thick s.s. plate and is provided with radial locking system which ensures complete risk free and leakproof sterilization . door when in operation or under pressure . pressure is adjustable from 10 to 20 p.s.i. fitted with pressure gauze. Safety valve and steam release valve. Horizontal autoclaves are available with or without s.s. boiler for units fitted with S.S. boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use re provided hydraulically tested up to 40 P.S.I. . automatic vacuum breaker is provided to break the vacuum in case of vacuum due to steam condensation . fitted with automatic pressure gauze control switch and automatic low water level cut off device. To work on 220 volt, A.C. supply; Available in following sizes:  Dia x Depth Load 350 x 550 mm 3 K.W 400 x 600 mm 4 K.W. 550 x 750 mm 7 K.W.

• Capacity: 3000 L
• Material: Stainless Steel
• Brand Name: Certoclave
• Application: Hospital
• Automation Grade: Fully Automatic

• Brand Name: JLab
• Place of Origin: India

Inner chamber jacket and boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi port valve stainless steel. It is fitted with automatic pressure control switch, indfoss piezostat, safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished.

Horizontal labware have always been appriciated in the industries because of the standards and high quality maintained while designing.Horizontal autoclaves are bigger in size than there counterpart vertical autoclaves. These also work on the same principal of sterilization by using heat and pressure. However these are designed for bigger workloads. The horizontal autoclave is tested by keeping in mind the ASME code. Accordingly the horizontal autoclave must be tested 130% of the rated pressure. There is not much need of designing small autoclaves with inside vacuum building phenomenon, but in the bigger horizontal autoclaves it must be kept in mind, when the steam colds down it tends to build a vacuum inside the chamber. However at acumen labware we engineer the horizontal autoclave for every possible flaw which might appear.

• Construction: Sterilizer has inner and outer wall made of 304 grade stainless steel, middle jacket made of stainless steel or brass and gun metal.
• Technical Data: Steam Working Pressure 1.26 kgf/cm2 (2.2 kgf/cm2 in case High speed sterilizer
• Working Temperature: 121oC
• Operating Voltage: 240 volts single phase, AC supply, 50 Hz.
• Sterilization Period: 45 to 50 minutes
• Components: Radiant locking system, cold water drainage system

HORIZONTAL AUTOCLAVE (ROUND) ITEM CODE: S.T.R-02 We offer to our clients Horizontal Autoclave (Round) This is a triple jacketed autoclave in Horizontal form. Our range is extensively used in hospitals, private clinics and nursing centers to clean the appliances from the bacterial, fungal and viral infections. Moreover, our range is also extensively used to clean contaminants from the laboratory appliances. This sterilizer disinfects the garbage sacks in buckets that are put in upward order. Internal and external walls of the autoclave are made of high grade stainless steel. Our autoclaves are appreciated for the features like corrosion resistant finish and sturdy construction.

This is a double walled unit mounted horizontally on a sturdy, heavy mild steel tubular stand duly painted . the inner wall is made up of 18 SWG stainless steel sheet duly argon arc welded . outer wall is of thick s.s. plate and is provided with radial locking system which ensures complete risk free and leakproof sterilization . door when in operation or under pressure . pressure is adjustable from 10 to 20 p.s.i. fitted with pressure gauze. Safety valve and steam release valve. Horizontal autoclaves are available with or without s.s. boiler for units fitted with S.S. boiler, separate valves for injecting the steam into the main chamber and releasing the steam in atmosphere after use re provided hydraulically tested up to 40 P.S.I. . automatic vacuum breaker is provided to break the vacuum in case of vacuum due to steam condensation . fitted with automatic pressure gauze control switch and automatic low water level cut off device. To work on 220 volt, A.C. supply; Available in following sizes:

We offer to our clients Horizontal Autoclave (Round) This is a triple jacketed autoclave in Horizontal form. Our range is extensively used in hospitals, private clinics and nursing centers to clean the appliances from the bacterial, fungal and viral infections. Moreover, our range is also extensively used to clean contaminants from the laboratory appliances. This sterilizer disinfects the garbage sacks in buckets that are put in upward order. Internal and external walls of the autoclave are made of high grade stainless steel. Our autoclaves are appreciated for the features like corrosion resistant finish and sturdy construction.  

Horizontal Autoclave, Circulating Water Bath, Vertical Autoclave

Autoclave Horizontal, Hand Sanitizer Dispenser, Nebulizer Machine