Hospital Furniture Dealers in Barara, Ambala

It is for use on a double 'C core, the bobbin is wound with 1100 turns of 22 s. w. g. copper wire and has approx. resistance of 6.0 ohms.

• Weight: 1-5 Kg
• Color: Available in Different Colors
• Durability: Long Life
• Performance: Optimum
• Resistivity: Corrosion & Chemical resistant

• Brand Name: NESSLER
• Country of Origin: India
• Material: mix

All equipment N consumables

Alpha Chem is manufactures,exporter & suppliers Elevating Pedestal Autopsy Table.  All stainless steel construction All 304 stainless steel with 4 finish. Table top, sink and grid plates are 14 gauge. Pedestal are 18 gauge All welds are Heliarc seams and joints, ground and polished to match adjoining surfaces All welds are rounded and polished on all inside and outside corners for easy cleaning Adjustable elevating actuators with touch control buttons Hydro-Aspirator with cold water control valve with reverse flow valve Body support solid or perforated 4 pieces 8 inches wide Spray Hose Assembly with cold water control valve nozzle and 10 ft. of pressure flexible hose Mixing faucet with gooseneck spout and wrist blade handles with vacuum breaker Heavy-duty 1/2 hp commercial disposal with switch and solenoid Large single compartment sink basin, 18” x 12” x 10” deep Rapid and positive drainage Removable Access Panel Plumbing and Electrical lines factory installed. Single point connection at customer location. May Require a trade professional at customers location FEATURES: Post mortem scale with scale pole and bracket Down draft ventilation assembly double-cone style Table rinse with cold water control valve and vacuum breaker Commercial Heavy duty Disposer 3/4 hp, 1 hp or 2 hp Single lever hot cold fixture Gas / air cocks Stainless steel full grid body supports removable Over-the-body dissecting tray  

We are offering operation tables, made entirely from stainless steel, in two halves slopping towards the centre a small wedge over the whole length separates the two halves, under the wedge provided a brass drain pipe. Removable and replaceable by sliding in or out blood and other fluids flow towards the centre of the table, from where these drip into the drain pipe and carried through an end drain tube to the receptacle after operation the whole top can be washed clean the drain pipe removed, cleared and replaced the s.s. Top is heated a set of electric lamp, placed to effect balanced heat distribution, dog holder with its s.s. Upright slide along slot in the top useful for fixing accessories a.s.s. Swing tray is fitted on a upright in one corner of the top useful for placing dissecting instruments accessories etc. Steel pipe frame handle and wheel for conscience in moving. Table top size 51”×18”×40” high. (b) –do—small type for frog, rabbit guinea pigs etc.

• Size: Multisizes
• Type: Hospital Steel Furniture
• Material: Steel
• Application: Hospital
• Color: White
• Condition: New

We follow strict quality strategy, guidelines and thus, to sustain good quality standards, we carry out stern examination of the raw inputs used at the initial stages. Our well-maintained and capacious warehouse helps us in managing systematically arrangement of goods and meeting massive requirements of the clients at a time.

• Type: SS Construction
• Material: Stainless Steel
• Country of Origin: Haryana
• Size: As Per Requrirement
• Brand Name: Radical
• Properties: Also Known As Dissecting Table, Postmortem Table Etc. Etc.
• Model Number: RSPA-3

These tables are manufactured using high quality raw materials. These are fabricated using 304 types of stainless steel, which offers easy to  clean, hygienic platform for performing autopsies. These are efficient in providing a smooth working surface to the pathologists.    Frame work constructed with heavy duty stainless steel.   Easy to clean, hygienic platform for performing postmortem   Mounted on heavy duty PCV rubber stumps   Over all size: - 2000(L) x 800(W) x 850(H) mm.

We are offering mortuary chamber. This chamber is used for storing dead bodies and further prevent from decomposition. The provided chamber is precisely manufactured using excellent quality components that are procured from well known vendors of the market. Moreover, this mortuary chamber can be availed by our clients at industry-leading prices. Mortuary chamber is specially designed to accommodate cadaverous under cool condition to prevent decomposition and offering vast space saving advantage over the conventional types together with greater hygiene. Double- walled with steel panel for outer surface and stainless steel inner chamber with insulation in between, front opening hinged insulated doors lined with magnetic gasket, handle and lock arrangement with keys in duplicate for individual dead travel on rollers fitted with ball bearing for easy movement. Exterior surface of mortuary storage cabinets is chemically treated against coated and duly finished with hammer tone paint. To avoid any moving part inside the cabinet for easier maintenance and cleaning view point, refrigeration unit is kept outside the chamber and fixed at near top. Temperature of -20c to 50c or - 15 to 200ºc is maintained by hermetically sealed refrigerator unit. Temperature controller is mounted on front panel, provided on front top, along with pilot lamp, main switch etc. Supplied complete with trays, cord and plug. Suitable to work on 220 volts ac. Available models :- single body two body four body six body

• Feature: Heat Resistant, Corrosion Resistant
• Material: MS
• Size: 18x24x30 Inch
• Load Capacity: 100-150 kg

• Type: Electronics Laboratory Instruments
• Weight: 20-30kg
• Color: Grey
• Voltage: 220V
• Warranty: 1yrs
• Brand Name: ENERZIO
• Usage/Application: DC MACHINE LAB
• Condition: New
• Accuracy: Lab Instrument

We are the main supplier of this product.

• Material: ABS
• Leg Shape: H Shape
• Frame Work: Rectangular Tubular Steel
• Usages: Hospital

• Size: Many
• Color: Any
• Brand Name: Esel
• Material: Mild Steel
• Height: 46 cm
• Length: 180 cm
• Width: 60 cm

.

Our value clients can avail from us technically advanced Mortuary Chamber. Mortuary Chamber is designed with utmost precision followed by comprehensive R&D. We offer Mortuary Chamber in different technical specifications to meet divergent demands of the clients.Specifications Cabinet Construction : Double walled construction with inner chamber made of Stainless Steel and outer body made of mild steel duly powder coated. High density polyurethane (PUF) insulation of desired thickness is filled between the walls and the whole structure is mounted on heavy duty castors for easy mobility. Trays to carry bodies with handles at both ends slide on rollers. Front opening, hinged stainless steel insulated doors lined with gasket, handle and lock arrangement with keys in duplicate for individual dead bodies. A double door system including the transparent inner acrylic door helps in viewing without disturbing the thermal conditions. Cabinet size : The size of cabinet is 1190(W) x 2360(D) x 2210(H) Refrigeration : The refrigeration unit is kept outside the chamber for easy maintenance. Strong and reliable with powerful quick response refrigeration system helps in achieving the desired temperature within a short period of time even at high ambient conditions. A highly efficient hermetically sealed compressor with air cooled condenser having the evaporator inside the chamber is used. A forced air type circulation is used to maintain uniform temperature inside the chamber. Non CFC eco friendly commercially available refrigerant is used. The temperature range 2 Degree to 8 Degree controlled by digital PID temperature controller. Power Requirement : The instrument is able to work on 220V AC Supply.

comprising of: light source 15v/150w twin bulb –1 no. fiber optic cable- 1 no. head light band - 1 no. x-ray view box - 1 no. suction - 1 set anti fog - 1 no. nasal cautery - 1 no. instrument tray - 2 nos. doctor chair - 1 no. optional accessories: a) sinuscope4mm 0°, wide angle b) sinuscope 4mm 30°, wide angle c) sinuscope4mm 45°, wide angle d) sinuscope 4mm 70°, wide angle e) ccd camera with couplerfor above sinuscope f) lcd with stand 19” @ 2. Motorized patient chair comprising of: fully motorized up & down for 300mm. fully motorized forward & backward for 180º. foot control.

We are offering motorized table etc. Our clients can avail a wide range of power instrument tables to our clients. These products are of height minimum 675mm height maximum 875mm. Stringent test are ensured at all levels to ensure its capability. Our range is highly appreciated by our clients for its performance and quality. We offer these products at market leading prices. height minimum 675mm height maximum 875mm vertical traveling range 200mm load maximum 80kg. table top size 570x400x24mm power supply ac 220/110v, 50/60 hz power consumption 24 volts dc weight(actual) 20kg. up & down movement by feather touch switch mounted with wooden top.

• Type: Electronics Laboratory Instruments
• Certification: CE Certified
• Weight: 0-10kg
• Type: Machine
• Color: Yellow
• Voltage: 110V, 220V
• Power: 1-3kw, 3-6kw
• Warranty: 1yrs
• Automatic Grade: Automatic

We have different Laboratory Instruments Manufacturer and Consumables related to and used in clinical and research laboratories for the preparation, separation and analysis of samples. A wide classification of Instruments that are used to analyze material samples we have.