Hospital Furniture Dealers in Saha, Ambala

Alpha Chem is manufactures,exporter & suppliers Elevating Pedestal Autopsy Table.  All stainless steel construction All 304 stainless steel with 4 finish. Table top, sink and grid plates are 14 gauge. Pedestal are 18 gauge All welds are Heliarc seams and joints, ground and polished to match adjoining surfaces All welds are rounded and polished on all inside and outside corners for easy cleaning Adjustable elevating actuators with touch control buttons Hydro-Aspirator with cold water control valve with reverse flow valve Body support solid or perforated 4 pieces 8 inches wide Spray Hose Assembly with cold water control valve nozzle and 10 ft. of pressure flexible hose Mixing faucet with gooseneck spout and wrist blade handles with vacuum breaker Heavy-duty 1/2 hp commercial disposal with switch and solenoid Large single compartment sink basin, 18” x 12” x 10” deep Rapid and positive drainage Removable Access Panel Plumbing and Electrical lines factory installed. Single point connection at customer location. May Require a trade professional at customers location FEATURES: Post mortem scale with scale pole and bracket Down draft ventilation assembly double-cone style Table rinse with cold water control valve and vacuum breaker Commercial Heavy duty Disposer 3/4 hp, 1 hp or 2 hp Single lever hot cold fixture Gas / air cocks Stainless steel full grid body supports removable Over-the-body dissecting tray  

• Type: Electronics Laboratory Instruments
• Weight: 20-30kg
• Color: Grey
• Voltage: 220V
• Warranty: 1yrs
• Brand Name: ENERZIO
• Usage/Application: DC MACHINE LAB
• Condition: New
• Accuracy: Lab Instrument

We are the main supplier of this product.

• Model Number: ALPHA CHEM-1102
• Brand Name: ALPHA CHEM

Mortuary chamber two body : mortuary chamber has an inner chamber and tray size 200 x 56 x 8 cms. Sliding on stainless steel u-rails are made of stainless steel. Outer chamber made of mild steel duly painted temperature range -5°c -25°c to ambient controlled through digital temperature controller-cum-indicator. Complete with built-in stabilizer & defrosting system. Chamber is provided with locked door & has index card holder & magnetic gasket. Workable on 220v ac 50hz single phase. Available model for single body, two bodies, three bodies, four bodies & six bodies are available.

• Brand Name: NESSLER
• Country of Origin: India
• Material: mix

All equipment N consumables

• Size: Many
• Color: Any
• Brand Name: Esel
• Material: Mild Steel
• Height: 46 cm
• Length: 180 cm
• Width: 60 cm

• Country of Origin: Made in India
• Item Code: GSC1524

“U” cut Leg section. Provided with pair of upholstery Lithotomy Crutches. Upper section with three drawers.Lower section has tow cabinet. Swinging tray for B.P. Instrument near headrest. Foam mattress with rexine cover supplywith single step stool.Pre Treated with 7 tank chemical treatment. Epoxy Powder Coated.

We are offering operation tables, made entirely from stainless steel, in two halves slopping towards the centre a small wedge over the whole length separates the two halves, under the wedge provided a brass drain pipe. Removable and replaceable by sliding in or out blood and other fluids flow towards the centre of the table, from where these drip into the drain pipe and carried through an end drain tube to the receptacle after operation the whole top can be washed clean the drain pipe removed, cleared and replaced the s.s. Top is heated a set of electric lamp, placed to effect balanced heat distribution, dog holder with its s.s. Upright slide along slot in the top useful for fixing accessories a.s.s. Swing tray is fitted on a upright in one corner of the top useful for placing dissecting instruments accessories etc. Steel pipe frame handle and wheel for conscience in moving. Table top size 51”×18”×40” high. (b) –do—small type for frog, rabbit guinea pigs etc.

• Usage/Application: Physics Lab
• Material: Plastic & Metal
• Durability: Long Life
• Installation: Easy
• Performance: Optimum
• Resistivity: Corrosion & Chemical resistant

• Plate dia: 175mm 200mm 250mm

Plate made of Aluminium, with tube for connection to the pump and a stopcock on the central pillar. Mounted on tripod heavy base.                  

• Brand Name: NSAW

used for storing cadaverous under low temperature cool conditions in order to prevent decomposition. These units are double walled with outer made of ms sheet duly painted and inner of ss sheet. Trays made of s.s. Sheet to carry dead bodies are provided with handles. Trays travel on rollers fitted with ball bearings for easy movement. Hermetically sealed compressor serves refrigeration unit, to maintain temperature range of 2°c to 5°c. Unit is fitted with digital temperature indicatorcum-controller. To work on 220/230 volts ac supply. Supplied with voltage stabilizer  

• Size: Multisizes
• Type: Hospital Steel Furniture
• Material: Steel
• Application: Hospital
• Color: White
• Condition: New

We follow strict quality strategy, guidelines and thus, to sustain good quality standards, we carry out stern examination of the raw inputs used at the initial stages. Our well-maintained and capacious warehouse helps us in managing systematically arrangement of goods and meeting massive requirements of the clients at a time.

The Mortuary Chambers, we make available, are highly efficient storage systems that are felicitously designed to store cadaverous under the best conditions, which ensure to prevent decomposition primarily and predominantly. These Storage Systems are designed and developed in absolute adherence to the set norms. They are made using the finest materials and the latest technology. We are bracketed with the top-notch Manufacturers, Exporters, and Suppliers of Mortuary Chamber from Haryana, India. Details : Offers space-saving advantage over the conventional type with greater hygiene Useful for hospitals Double walled with mild steel/pre-fabricated panels for outer surface and stainless steel inner chambers with insulation in between Front opening, hinged insulated doors lined with magnetic gasket, handle and lock arrangements with keys in duplicate for individual dead bodies Trays to carry dead bodies with handles at both ends Travel on rollers fitted for easy movements Exterior surface in chemically treated, ant rust coated and duly finished with powder coated paint Avoid any moving part inside the cabinet For easier maintenance and cleaning, refrigeration unit is kept outside the chamber and fixed at rear Temperature of -2.c to +5.c is maintained by hermetically sealed refrigerator compressor unit and is controlled by an automatic electronic solid state digital temperature controller-cum-indicator temperature controller is mounted on front panel Provided on front top, along with pilot lamp, main switch, etc. Supplied complete with trays, cord and plug that makes it suitable to work on 220V Single phase 50 Hz AC supply

We offer Laboratory Apparatus. A. 4 riders, 2 slow motions, lens holders, pins 1 mtb. Superior qualityc. One rod covered with brass graduated piped. 150cm long p-172a type.e. 150cm one rod with brass graduated pipef. 150cm both rod covered with brass pipe.

Made entirely from stainless steel, in two halves slopping towards the centre a small wedge over the whole length separates the two halves, under the wedge provided a brass drain pipe. Removable and replaceable by sliding IN or OUT blood and other fluids flow towards the centre of the table, from where these drip into the drain pipe and carried through an end drain tube to the recepatable after operation the whole top can be washed clean.

Folding stretcher made of best quality fabric sturdy with folding frame, heavy M.S pipe or Aluminum pipe on the both sides and cross strip provided on the both side of the stretcher to open or to close the stretcher, rubber handle to carry the unit, available in different colors standard size, light weight easily foldable. Fabric quality tetron material with stretcher size 22″x 84″ with pole size of 7 fit each side four heavy metal u shape feet provided to hold the stretcher above from the earth. Velcro strap on both side to hold the patient.  

Medical Instruments Cabinet made of full steel frame with steel angles the cabinet with the provision of the door with glass viewing system from the front, and provided with 3 to 5 shelves inside that is adjustable in height as per the requirements of the user, finished with powder coated paint finish provided with lock and key arrangement, cabinet fitted on the floor feets, shelves of the cabinet made of transparent acrylic sheet or glass as per the demand of the user.