Hydraulic Test Rig Dealers in Ambala

Hydraulic Ram is used for pumping small quantity of water at high head, when large quantity of water

• Brand Name: KRISHNA
• K: K
• K: K

We are offering Hydraulic Ram Test Setup. Description:- the set-up is designed to study the hydraulic ram. Hydraulic ram is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “when flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. The set-up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and vacuum gauge are connected on delivery and suction side for the purpose of measurement. experiment:-  to find out discharge of useful water and waste water.  to find out the efficiency of the hydraulic ram features:-  closed loop water circulation  compact & stand alone set-up  ms excel sample calculation program on demand  stainless steel tanks and wetted parts  superb painted structure  simple to operate & maintain utilities required:- electric supply: - provide 230 +/- 10 vac, 50 hz, single phase electric supply with proper earthing. (neutral – earth voltage less than 5 vac) 5 a, three pin socket with switch for pump. water supply: tap water connection ½ “ bsp distilled water @ 90 ltrs. (optional)

As a respectable firm, headquartered in Ambala(India), we are making available top-of-the-line quality products in the market. Our warehouse is equipped with modern amenities and assists us completely in fulfilling urgent and voluminous requirements of the clients on a timely basis. Features Precision engineered Smooth operation User-friendly

Apparatus consists of a close circuit through which water is circulated continuously by means of a centrifugal pump of 25 mm x 25 mm with 0.5 H.P. motor to make the supply from sump tank. A sump tank 125 cm long, 80 cm wide and 40 cm high fabricated on MS. angle frame with 3 mm thick M.S. sheet is provided. Inside of the tank is lined with FRP. A drain valve of 15 mm size is provided in the bottom of the tank. A supply tank 50 cm x 50 cm and 100 cm high fabricated with SS. sheet with over flow arrangement, gauge glass tube and 15 mm size drain valve is provided. Inside of the tank is lined with FRP. The tank has the provision for fixing the supply pipe of 50 mm dia of which other end is connected to the ram. The tank is supported on a stand fabricated from MS. angle.

• Fuild mechanics and machinary equipment: Reciprocating Pump Test Rig
• Fuild mechanics and machinary equipment: Centrifugal Pump Test Rig
• Fuild mechanics and machinary equipment: Kaplan Turbine Test Rig
• Fuild mechanics and machinary equipment: Francis Turbine Test Rig

Product description:owing to our expertise and the assistance of dedicated workforce, we have been able to offer optimum qualityhydraulic ram test rig at an affordable market price. These products are precisely manufactured under strict supervision using best quality metal. Known for unmatched quality, high efficiency and hassle-free operations, these products are highly demanded among the industrial clients. description: � hydraulic ram is used for pumping small quantity of water at high head, when large quantity of water at small head is available. It operates on the principle that if flowing water is suddenly brought to rest in a long pipe, a phenomena known as water hammer occurs, wherein a pressure wave travels along the pipe. This principle is used in the hydraulic ram to pump water. The set-up consists of a box incorporating pulse and non-return valves and a supply reservoir on a stand which is fed by the overhead tank. An air vessel above the valve chamber smoothes cyclic fluctuations from the ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic.

The setup is designed to study the Hydraulic Ram. Hydraulic Ram is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “when flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. Set up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and Vacuum gauges are connected on delivery and suction side for the purpose of measurement Experiments To find out discharge of useful water and waste water. To find out the efficiency of the Hydraulic ram Utilities Required Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase electric supply with proper earthing. (Neutral – Earth voltage less than 5 VAC.), 5A, three pin socket with switch for pump. Water supply Tap water connection” BSP Distilled water @ 250 liters (optiona)

HYDRAULIC RAM TEST SETUP DESCRIPTION:- The Set-up is designed to study the Hydraulic Ram. Hydraulic RAM is used for pump little quantity of water to high head from a large quantity of water available at low head. It works on a principle of water hammer stating that “When flowing water is suddenly stopped in a long pipe a pressure wave travels along the pipe creating an effect of water hammer”. The Set-up consists of a pipe section fitted with a pulse valve and non-return valve, a supply reservoir on a stand which is connected to an overhead tank, an air vessel above the valve chamber smoothes cyclic fluctuations from the Ram delivery. Different pressure may be applied to the pulse valve to change the closing pressure and hence the operating characteristic. The flow rate of useful and waste water is measured using measuring tank and stop watch provided. Pressure and Vacuum Gauge are connected on delivery and suction side for the purpose of measurement. EXPERIMENT:- Ø To find out discharge of useful water and waste water. Ø To find out the efficiency of the Hydraulic RAM FEATURES:- Ø Closed loop water circulation Ø Compact & stand alone set-up Ø MS Excel sample calculation program on demand Ø Stainless Steel tanks and wetted parts Ø Superb painted structure Ø Simple to Operate & Maintain UTILITIES REQUIRED:- Electric Supply: - Provide 230 +- 10 VAC, 50 Hz, Single Phase Electric Supply with proper earthing. (Neutral – Earth voltage less than 5 VAC) 5 A, three pin socket with switch for pump. Water Supply: Tap water connection ½ “ BSP Distilled water @ 90 Ltrs. (Optional) TECHNICAL SPECIFICATIONS: - Ø Product : Hydraulic RAM Ø RAM : Size 50 x 15 mm, Supply Head 2.5m, Delivery Head 10 m (max.)

Hydraulic Ram Test Setup, Window Air Conditioner

Hydraulic Ram Test Rig, whirling shaft apparatus