Induction Coils Dealers in Mahesh Nagar, Ambala

Spark length approx 30mm, operates on 6 to 8 V D.C. Similar to Cat No. P-7975 as above. A fully adjustable trembler system is incorporated and spark suppression capacitors are housed in the base.

Inclined Plane,Annotated Inclined Plane,Laboratory Inclined Planewe Offer Acme Quality Magnetic Induction Coil that is Utilized as Passive Electrical Device that is Used in Various Laboratories. the Coils are Housed in a Teakwood Base, Voltage Tested Condensers are Fitted Inside the Wooden Polished Base. Available in Different Specifications this Heating Induction Coil is also Manufactured as per Customers Requirements. We are Reckoned as the Most Outstanding Induction Coil Manufacturer and amongst the Famous Exporters from India.

• Spark Length: 10 mm, 25 mm, 50 mm, 75 mm, 100 mm.

Induction Coil Ruhmkorff Coils are wound with highly insulated copper wire impregnated with paraffin wax, input 6-8 V d.c. through two 4 mm socket terminals, with an adjustable trembler system. The spark suppression capacitor is housed in the base. A pair of pointer electrodes with insulated handles for adjustement of the spark gap are provided. Spark Length 10 mm, 25 mm, 50 mm, 75 mm, 100 mm.

With primary of heavy gauge enamelled copper wire, approximate resistance 0.5 ohms wound on former 110x30 mm. length x diameter. Secondary coil of fine enamelled copper wire, approximately resistance 100 ohms on former 120 x 82 mm. length x diameter. Both coils fitted with 4 mm. sockets. Iron core 160x15 mm. length x diameter.    

• Type: Hight Voltage Output-upto 500kV
• Color: Black
• Country of Origin: India
• Brand Name: HYGRADE
• Voltage: 500KV
• Input Voltage: 6-12V DC
• Input Current: 3 Amp MAX

Induction Coil has a 25mm / 1" spark gap and can produce pulses of high voltage current from a low voltage direct current source such as a battery. It is suitable for use with gas-filled discharge tubes, vacuum tubes, eudiometers and for general laboratory work. It is comprised of two coils fully enclosed in a polished wooden case with binding posts. Includes an adjustable neef type vibrator system, primary current polarity reversal, on-off switch, a capacitor enclosed in the box and special alloy contacts. Spark gap at the discharge points can be adjusted by sliding rods back and forth. Input: 6-12 Volts DC at 3 Amps max. Note---we have various models of induction coil with Spark Gap from 25mm to 100mm.

Induction Coil 50 Mm, Pipette Stand, Conical Flasks, Crucible

• 1028 (a): 5mm
• 1028 (b): 10mm
• 1028 (c): 15mm
• 1028 (d): 20mm
• 1028 (e): 25mm
• 1028 (f): 50mm

DESCRIPTION : This coil, specially designed for school use is suitable for vacuum tubes and audiometers etc. It is wound with insulated copper wire, has tungsten contacts and on/off reversing switch as communicator. Voltage tested condensers are fitted inside the teak polish wooden box. The top of the wooden box is provided with sunmica and relevant data engraved on the sunmica. Terminals are provided for H.T. output and L.T. input of the coil. Up to 50 mm spark is obtained with 4 to 6 volt D.C. input .

• Country of Origin: India
• Material: Metal
• Shape: Round
• Condition: New
• Finishing: Polished

• Size: Customize
• Type: Induction Coils
• Color: Black, Red
• Condition: New
• Finishing: Polished
• Product: Induction Coils

Induction Coils also avialable in different variant 10MM 15MM 20MM 25MM 50MM 100MM

• Application: University labs,Scientific departments,Electrical engineering
• Condition: Good
• Product Name: Demonstration Induction Coils
• Feature: Soft iron core,Insulated socket terminals,Available in various specification
• Place Of Origin: Ambala Haryana
• Brand Name: TD

Td Models & Scientific Co manufactures the sophisticated Induced Current Apparatus. The Induced Current Apparatus has two coils wound on separate bobbins, one having many turns of fine wire and the other with a few turns of heavy wire. The Apparatus is used to demonstrate that the induced potentials are produced, either by movement of a permanent or electromagnet, or by a change of current in one coil. Features Insulated socket terminalsSoft iron coreAvailable in various specification Applications University labsScientific departmentsElectrical engineering

• Size: Standard
• Material: Metal
• Finishing: Polished
• Voltage: 6 to 12 V DC
• Pack Type: Box

GWL- A Induction Coil: The primaries are wound with thicker copper enamelled covered wire on letherite pipe in two layers. The secondary coils are divided into two parts & are given heavy insulation. Each layer is wound in a cover of butter paper & are completing the winding, the entire is dipped into hot wax to seal each layer against moisture effect. The coils are housed in a teakwood base, voltage tested condensers are fitted inside the wooden polished base. Handles to get the spark are fitted on it & make or break points are of silver. One point is adjustable to get any cycle. On/off reversing switch commutator working on 6 to 12 V DC.   GWL- B Dissectible Induction Coil: Most suitable for demonstration. Secondary coil & capacitor can be easily separated out. With arrangements for disconnecting & capacitor, while in operation. All connections clearly visible. Spark length 25 mm. 

We offer duly insulated, long life induction coils, input 6-12 volts dc @ upto 5 amps, output spark length in air 5 mm to 200 mm or above, with adjustable handles, on off switch, indication light, on base upto 25 mm, and in covered wooden box with locks and key. Also available induction coils worked on 220 v ac mains, with built in transformer, and rectifier to provide proper voltage at proper amperes.

• Spark Length: 10 mm 25 mm

INDUCTION COIL, RUHMKORFF Insulated copper wire impregnated with paraffin wax wounded on the coils, input 6-8 V d.c. through two 4 mm socket terminals, with an adjustable trembler system. The spark suppression capacitor is housed in the base. Two pointer electrodes with insulated handles are provided.

People who are looking for Self And Mutual Inductance Coils "PSAW" of the Manufacturers, Suppliers& Exporters of laboratory equipments in which this is one of them for more information below mention is the details:-

• Brand Name: SCIENTICO
• Port: ICD,TKD
• Place of Origin: INDIA
• Supply Ability: 2000 Piece/Pieces per Month

The primaries are wound with thicker copper enameled covered wire on letherite pipe in two layers. The secondary coils are divided into two parts & are given heavy insulation. Each layer is wound in a cover of butter paper & are completing the winding, the entire is dipped into hot wax to seal each layer against moisture effect. The coils are housed in a teakwood base, voltage tested condensers are fitted inside the wooden polished base. Handles to get the spark are fitted on it & make or break points are of silver. One point is adjustable to get any cycle. On/off reversing switch commutator working on 6 to 12V DC.

We are offering demonstration induction coil.with primary of heavy gauge enamelled copper wire, approximate resistance 0.5 ohms wound on former 110x30mm. Length x diameter. Secondary coil of fine enamelled copper wire, approximately resistance 100 ohms on former 120x82 mm. Length x diameter. Both coils fitted with 4mm sockets. Iron core 160x15mm. Length x diameter.

Heavy gauge enamelled copper wire, approximate resistance 0.5 ohms wound on former 110 x 30 mm length x diameter. Secondary coil of fine enamelled copper wire, approximately resistance 100 ohms on former 110 x 82 mm length x diameter. Both coils fitted with 4 mm sockets. Iron core 120 x 15 mm length x diameter.

• Available in Spark length: 10mm, 15mm, 20mm, 25mm, 75mm, 100mm
• specification: In cabinet polish wooden box.Coils are made from best quality enamelled copper wire and paraffin insulaion is provided throughout.Fitted with platinum contact with removable spark discharger.

Induction Coil[induction Co] to Produce High Voltage Alternating Current or Pulses of High Voltage Current from a Low Voltage Direct Current Source. Suitable for Use with Gas-filled Discharge Tubes, Vacuum Tubes, Eudiometers and for General Laboratory Work. Comprised of Two Coils Fully Enclosed in a Polished Wooden Case with Binding Posts. Includes Adjustable Vibrator System, Primary Current Polarity Reversal and Off-on Switch, a Condenser Enclosed in the Box and Special Alloy Contacts. Spark Gap At the Discharge Points Can Be Adjusted By Sliding Rods Back and Forth. Requires 6-12 Volt Power Source such as a Battery. Maximum Spark Length Cat. No. 25mm 50mm

We are identified as one of the most dependable Magnetic Induction Coil Manufacturers in India. Coils are wound with highly insulated copper wire impregnated with parrafin wax. The spark suppression capacitor is housed in the base. A pair of pointer electrodes with insulated handles for adjustment of the spark gap is provided for the proper functioning of the Induction Coil. Moreover, the Electromagnetic Induction Coil is widely demanded in the international market for accurate result after the experiment.

Heavy gauge enamelled copper wire, approximate resistance 0.5 ohms wound on former 110 x 30 mm length x diameter. Secondary coil of fine enamelled copper wire, approximately resistance 100 ohms on former 110 x 82 mm length x diameter. Both coils fitted with 4 mm sockets. Iron core 120 x 15 mm length x diameter.

Induction Coils, cathode ray tube, glass testing instrument

Induction Coil, Ticker Tape Timer AC Main, Deflection Magnetometer

We manufacture high voltage high frequency equipment like: tesla coil, wimshurts machines,induction coil and vibe energy machine etc.

Induction Coils, Stop Clock, Water Tap, Calorimeter, Chiller Water Bath

Induction Coils, Offer Wimshurst Machine, scientific instrument

Induction Coil, Altimeter, Microprocessor Photo Colorimeter

Demonstration Induction Coil, Lens Holder, Digital G M Counter