Back Back
Vertical Autoclave
Get Price Quote
Verticle Autoclave is a versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins.Optional Automatic low-water level cut off- device. Pressure Control switch. Water lever arrangement. Dressing bins for various size.
Glass Bead Sterilizer
Get Price Quote
1 Piece (MOQ)
SIS – 1404 GLASS BEAD STERILIZER is a Quick, Easy and Accurate alternative to traditional methods of sterilization by destruction of all Micro-Organisms within seconds. GLASS BEAD STERILIZER is used in the Medical, Dental, Laboratory and Biotechnology / Tissue Culture, Pediatric professionals for the past 10 years. Our GLASS BEAD STERILIZER is incorporated with an imported thermostat, which maintains the temperature with an accuracy of ±1% these units, having a stainless steel body, are compact enough to be placed on any laminar Air Flow Work benches or any other workside tables in a clean room atmosphere.
Best Deals from Industrial Autoclave
Stainless Steel Vertical Autoclave
Get Price Quote
Constructional & Salient Features\n\nInner/Outer Surface made of stainless steel.\nSupporting Ring & Legs are made up of Mild Steel\nHeater cover with stand\nBucket is made of Stainless Steel Sheet\nLid is made of thick machined Mild Steel plate lined with Stainless Steel from inside\nLid is fitted with Pressure Gauge, Spring Loaded Safety Valve, Manual Exhaust Valve, and water level indicator\nDrain Valve facilitate easy cleaning of the chamber\nFitted with silicon rubber gasket\nAll internal joints are argon arc welded\nPressure Control Switch and Low Water Level Cut-Off system for general safety of the element\nOperating range from 15psi to 22psi pressure\nWorks on 220/230Volts, 50/60Hz AC supply\n\nOptions\n\nPLC Controller Provider\nDouble/Triple Wall\nAnalogue 0-60 minutes ON/OFF mechanical timer\nDigital ON/OFF timer with LED display\nVacuum Pump\nElectrically Controlled Water Inlet Valve\n
Triple Wall Vertical High Pressure Autoclave
Get Price Quote
1 Piece (MOQ)
Vertical Autoclave
Get Price Quote
1 Piece (MOQ)
300 Ltr. Horizontal Autoclave
340,000 Per Piece
1 Piece (MOQ)
Double Wall Vertical Autoclave
35,000 - 350,000 Per Piece
100 Piece (MOQ)
Double Wall Vertical Sterilizer Autoclave
35,000 - 120,000 Per Piece
1 Piece (MOQ)
Made of stainless steel with the inner chamber of a thick pressure gauge. The outer surface has a mirror polish. The lid of this autoclave is thick along with a safety valve, pressure release valve, and drain valve. Spring loaded valve to adjust the pressure.Specifications: Dimension Power Capacity 250x450mm 2 KW 22 Ltrs 300x500mm 3KW 40 Ltrs 350x550mm 4KW 50 Ltrs 400x600mm 5KW 78 Ltrs 450x600mm 5KW 98 Ltrs 550x750mm 6KW 152litres
Vertical Triple Wall High Pressure Autoclave
54,000 - 80,000 Per piece
1 Piece (MOQ)
Vertical Autoclave
Get Price Quote
100 Piece (MOQ)
Horizontal Rectangular Autoclave
Get Price Quote
We are offering All contact parts is made of S.S 316 with food grade joints silicon gasket load in trolley and with door safety locks. When door is in under pressure and jacket is provided for storage of steam and boiler is electric operated with heaters and digital temperature controlled and display pressure. Switch is provided for controlling of pressure and safety .Valve is provided for complete stainless steel. The sterilizer is based on the principle that microbiological action of saturated steam at elevated temp is rapid and thorough. All models work on downward displacement of air principle which is most economical method of obtaining for all types of bulk sterilization which are commonly needed in Medical, Agricultural and Pharmaceutical institute Suitable for sterilizing hospital dressings, linen, rubber plastic goods, surgical instruments, glassware’s and utensils etc. Construction Robust and rugged all weld construction which is leak proof unlike riveted construction. Inner chamber & Outer chamber is made of stainless steel of 304316 quality and jacket is made out of rolled steel. Sterilizers will have single door made out of rolled steel lined with S.S. sheet on both sides. All the sterilizers are hydraulically tested to withstand 2.5 times the working pressure. The steam jacket is lined on the outer side with asbestos sheet or glass wool which prevents heat losses due to radiation and is covered by strong rolled steel sheet duly painted.Boiler Made of thick stainless steel plate suitably located under the sterilizer. High grade flanged type heating elements are fitted from front side for easy replacementrepair. Fitted with water gauge glass for water level, safety valve, water inlet and drain valves. It is also provided with Low Water Level cut off device. This device protects the heater in the generator from burning out dry. The steam pressure in the boiler is indicated on an individual pressure Gauge. Safety Lock for Door Every horizontal rectangular sterilizer is fitted with SELF LOCKING SAFETY DOOR which cannot be opened when the chamber is under pressure. The Chamber Two separate valves provided for evacuating air and steam from inner chamber and jacket as and when desired. A steam trap is fitted in the chamber discharge line to eliminate the condensate automatically. Switch Box Houses the Pressure control switch, Main switch, Pilot lamps, relays etc. and mounted on the stand of the sterilizer for easy operation.Technical specification S.S. Load & carry Transfer trolly. Watering type vacuum pump with S.S. condenser and starter. Automatic recording cycle with printer Microprocessor controller with fully automatic. Fully automatic printer thru. PC with graphical display. PLC Provided HMI PLC, HMI, sensors RTD and pressure transmitter, Pressure gauge etc would be reputed make. Other Features Triple Safety : The sterilizer is provided with triple safety. By a pressure control switch which automatically limits the pressure to the required set valve. Two spring loaded safety valves one each at chamber and boiler level. A dead weight safety valve at chamber level. A Plug Screen : Prevents the discharge line from choking. The plug is easily removable for routing cleaning. A powerful Ejector (for drying sterilized linen) circulates air through the chamber. The circulating air passes through a corrosion resistant metal wool filter. A Dial thermometer is provided to show the chamber temperature. Automatic Vacuum Breaker : Automatic Vacuum Breaker is provided to break vacuum case of vacuum formation due to steam condensation. Operating. Temperature and pressure : Sterilizing Temp. : 121°C. Sterilizing Pressure : 1.2 to 1.5 kgCm2, (15 psi to 22 psi) Optional Accessories ChamberJacket of S.S. 316 Door of S.S. 304316 Additional TrayShelves Carriage & Trolley Direct steam supply from centralized boiler Temperature recorder High pressure High vacuum model Additional door (Double door)
Vertical Triple Walled Autoclave
88,000 Per piece
1 Piece (MOQ)
High Pressure Horizontal Autoclave
Get Price Quote
A versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins. but presented in a horizontal position and without steam jacket. The outer body made of mild steel, inner chamber made of stainless steel. Chamber Size in Dia x Depth Load Capacity (approx.) A. 400x600mm 6KW 78ltrs. B. 400x1100mm 9KW 162ltrs. C. 500x900mm 9KW 165ltrs. D. 500x1200mm 9KW 221ltrs.
Vertical Autoclave
30,000 Per Unit
Horizontal Autoclave
150,000 Per Piece
Vertical Autoclave
Get Price Quote
Vertical Autoclave
5,200 - 6,500 Per piece
1 Piece (MOQ)
Vertical Autoclave
Get Price Quote
Portable Vertical Autoclave
Get Price Quote
1 Piece(s) (MOQ)
Portable Vertical Autoclave RSPA Series : These are available in various capacities to meet the requirements of varied clients. It incorporates a dead weight safety valve and spring loaded safety valve for pressure adjustment. We supply Portable Autoclaves with a tripod stand, electrical fittings, cord and plug. Our Autoclave Portable is hydraulically tested for up to 30 PSI and works on power supply on 220 to 230 Volt. Fitted with pressure gauge up to 20 PSI.The unit has spring loaded safety valve for pressure adjustment and a dead weight safety valve.Supply complete with electrically fittings, cord & plug, supplied complete with Tripod Stand.To work on 220/230 Volt AC supplyAll body made of stainless steel or aluminium as per requirement. Size (mm / inches) Capacity Ltr300 x 300mm / 12 x 12" 20 Ltr
Horizontal Autoclave
150,000 Per Piece
1 Piece(s) (MOQ)
We are the main supplier of this product.
