Industrial Autoclave Dealers in Saha, Ambala

 Alpha Chem is manufactures,exporter & suppliers Cement Autoclave. Cement Autoclave : These equipments are tested in accordance with the procedures laid down in ASTM C 151 standard where change in the length of the bars (test) of cement is measured for the difference in the size after exposing them to stipulated pressure and temperature for a specific time period.   Feature :   Versatile usage Stainless steel construction Ergonomic Design Energy Efficient Double Safety  Radial Locking Arrangement  Double Safety Valve Protection Hydraulic Testing Upto 2.5 times the working pressure Calibration And Protocol Documentation Working pressure for our standard model cement autoclave is between 60 -350 psi, however this can be upgraded to be used for higher pressures   Pressure Control:   The pressure inside our cement autoclave is controlled through a semi automatic electro mechanical device called piezostat, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressure exceeds the set pressure value of the autoclave, thus making it very safe and energy efficient. Specification : Wing nut lock locking mechanism for ultimate ease of operation and safety.Conforming to ASTM C151, AASHTO T 107Huger grade spring loaded safety valve of brass., duly chrome plated.High accuracy and reliable pressure gauge.   General Description & Specifications:      The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost. The gap in between the walls is filled with thermal insulation to prevent heat loss and energy. The control system consist of sensitive pressure regulator, pressure gauge, safety valve, temperature control switch, power ON-OFF switch and pilot lights to indicate status of the electric heating units and control switches.   Inside chamber dimensions    10.5 cm dia x 40.5cm height. Rating                                       :    3000 watts Pressure range                           :    21 kg/cm2 Least Count                               :    04 kg/cm2 Temp.range                                :    215 deg C Power supply                              :    230 Volts AC Single Phase 15 Amp   Standard Accessories :     Special rack to hold specimens above water level in the autoclave and in vertical position Pressure gauge with calibration report with national traceability Silicon rubber Gasket Spanner Accessories At Extra Cost:     Length comparator with dial micrometer 0.002mm X 5mm shrinkage bar moulds(single/two/triple gang) PID Auto tuning Digital Temp. indicator cum controller with or without PC interface for data logging PID Auto tuning Digital Pressure indicator cum controller with or without PC interface for data logging Spare heater set Spare Silicon Gasket Spare Pressure gauge Spare safety valve

• Brand Name: ALPHA CHEM
• Model Number: ALPHA CHEM-1387

Cement Autoclave : Alpha Chem is manufactures,exporter & suppliers Cement Autoclave. Cement Autoclave : These equipments are tested in accordance with the procedures laid down in ASTM C 151 standard where change in the length of the bars (test) of cement is measured for the difference in the size after exposing them to stipulated pressure and temperature for a specific time period. Feature : Versatile usage Stainless steel construction Ergonomic Design Energy Efficient Double Safety Radial Locking Arrangement Double Safety Valve Protection Hydraulic Testing Upto 2.5 times the working pressure Calibration And Protocol Documentation Working pressure for our standard model cement autoclave is between 60 -350 psi, however this can be upgraded to be used for higher pressures Pressure Control: The pressure inside our cement autoclave is controlled through a semi automatic electro mechanical device called piezostat, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressure exceeds the set pressure value of the autoclave, thus making it very safe and energy efficient. Specification : Wing nut lock locking mechanism for ultimate ease of operation and safety.Conforming to ASTM C151, AASHTO T 107Huger grade spring loaded safety valve of brass., duly chrome plated.High accuracy and reliable pressure gauge. General Description & Specifications: The Autoclave is double walled. Inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. The boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. The silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. The boiler is mounted in between the strong angle iron frame and covered with CRC sheet – attractively powder coated. The outer cover can also be of Stainless steel at an extra cost.

• Material: Carbon Steel, Metal, Mild Steel, Stainless Steel
• Shape: Vertical
• Thickness: 0-5mm, 10-15mm, 5-10mm
• Certification: CE Certified, ISO 9001:2008
• Weight: 1-10kg, 20-30kg, 30-40kg, 40-50kg
• Color: Black, Golden, Grey, Grey-Golden, Metallic, Shiny Silver, Silver
• Voltage: 240V, 380V, 440V, 580V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Surface Finishing: Polished, Power Coated
• Application: Industrial Use, Laboratory Use
• Feature: Accuracy Durable, Auto Reverse, Corrosion Resistance, Dimensional, Hardend & Temper, High Quality, High Tensile
• Automation Grade: Manual, Semi Automatic

• Material: Mild Steel
• Shape: Vertical
• Thickness: 0-5mm
• Weight: 1-10kg
• Color: Shiny Silver
• Application: Laboratory Use

Verticle Autoclave is a versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins.Optional Automatic low-water level cut off- device. Pressure Control switch. Water lever arrangement. Dressing bins for various size.

We are offering glass bead sterilizer. Technical specification approximate time for sterilization 5 seconds 10 seconds 15 seconds mirror wool pledgets glass-metal syringes burs curettes needles reamers cotton rolls forceps absorbent materials tips tweezers probes before- on sterlizer for 20 minutes

We offer high-quality Vertical Autoclave to the laboratories across the country and abroad. We have carved a niche in the market as the credible Manufacturer, Exporter, and Supplier of Vertical Autoclave from Haryana, India. Our Vertical Autoclaves are extensively demanded for sterilization, which is done under saturated steam pressure and at a point anywhere between 10-20 P.S.I. that is fairly adjustable too. And for quality, they undergo stringent quality tests. Rely on us! Details : With both inner chamber & SS wall Double walled units with inner chamber (Boiler made of 18 S.W.G. stainless steels) and outer chamber is covered with SW.S.Lid is tightened by wing nuts/radial locking system (AS ORDERED) Fitted with neoprene rubber gasketAll systems are hydraulically tested up to 40 P.S.I. as a safety measureAll autoclaves are fitted with standard accessories such as water indicator, pressure gauge, steam release cock, spring-loaded safety valve and gating elementSupplied complete with S.S. basket, cord and plug to work on 220/230 volts A.C. SupplyALL DELUXE MODELS besides being fitted with STAINLESS STEEL/GUNMATAL LID and having inner chamber made of S.S. and outer chamber covered with stainless steel are also fitted with VACUUM BREAKER as a SAFETY DEVICE

• Brand Name: SLISCO
• Certification: ISO 9001:2008 Certified
• Place of Origin: India
• Surveying and civil engineering lab equipment: Laser Distance Measures
• Surveying and civil engineering lab equipment: Laboratory Thermometers
• Surveying and civil engineering lab equipment: Laboratory Ovens
• Surveying and civil engineering lab equipment: Lateral Extensometer

We are instrumental in providing our clients a comprehensive range of laboratory cement autoclave. Product description:specifications: dimensions: 10.5 cm voltage: 230 v, 50 hz, single phase ac supply diameter: 40.5 cm

• Construction: Sterilizer has inner and outer wall made of 304 grade stainless steel, middle jacket made of stainless steel or brass and gun metal.
• Technical Data: Steam Working Pressure 1.26 kgf/cm2 (2.2 kgf/cm2 in case High speed sterilizer
• Working Temperature: 121oC
• Operating Voltage: 240 volts single phase, AC supply, 50 Hz.
• Sterilization Period: 45 to 50 minutes
• Components: Radiant locking system, cold water drainage system

HORIZONTAL AUTOCLAVE (ROUND) ITEM CODE: S.T.R-02 We offer to our clients Horizontal Autoclave (Round) This is a triple jacketed autoclave in Horizontal form. Our range is extensively used in hospitals, private clinics and nursing centers to clean the appliances from the bacterial, fungal and viral infections. Moreover, our range is also extensively used to clean contaminants from the laboratory appliances. This sterilizer disinfects the garbage sacks in buckets that are put in upward order. Internal and external walls of the autoclave are made of high grade stainless steel. Our autoclaves are appreciated for the features like corrosion resistant finish and sturdy construction.

• Shape: Vertical
• Capacity: 85L
• Material: Stainless Steel
• Voltage: 208/230 V
• Frequency: 50-60 Hz
• Phase: Three Phase
• Automation Grade: Semi Automatic

High pressure vertical steam sterilizer is used for sterilizing, surgical instruments dressing materials linen rubber, plastic material by means of saturated stream under pressure of 15 to 20 P.S.I. (adjusted) apart from health services it is also used in scientific research laboratories, educational institutions and universities. The triple wall unit has inner chamber steam jacket and outer wall made of S.S. duly argon arc welded. The space between outer wall and steam jacket is filled with high grade glass wool to minimize the temperature loss, all sterilizers are hydraulically tested up to 40 P.S.I the lid is made of thick S.S./ gunmetal and closed by wing nut type closing arrangements fitted with a gasket made of neoprene rubber, water level arrangements to indicate water level, pressure gauze , steam release cock , spring loaded safety valve which can be set at any selected point from 10 P.S.I , +_ 3 P.S.I and drain cock.. Supplied complete with cord and plug to work on 220 volt. 50 Hz. AC supply. Available in following sizes. OPTIONAL ACCESSORIES: a) Automatic Pressure cut-off switch b) Low water level cut-off device c) Automatic German timer

  BIS-4031. It is high pressure autoclave designed especially for conducting accelerated soundness tests on Cement or the autoclave expansion tests. It mounted in a sturdy supporting frame, and enclosed in a heat-insulated/metal housing which is attractively finished in hammertone paint. The top has a pressure regulator safety valve and pressure gauge. The unit attached to the side of the housing has power switcnes and pilot light for controlling the electric heating unit.

Our Vertical Autoclave Double Drum have Specification Double wall unit made of stainless steel chamber and lid made of heavy duty gun metal single piece, unit run on power 220V 50 Hz double safety valves to ensure the safety of the user and the pressure gauge on the top of the lid, whistle, safety valve also provided on the top of the lid, gasket placed well between the lid and the unit water Lever Indicator to show the level of the water inside the unit, release wave of the steam while the cycle complete, water changing tap, water input funnel and two metal handle to hold the unit while movement, accessories; Heavy duty Power lead, two spare element, two spare gasket.

TAI-908 VERTICAL SQUARE BODY DOUBLE WALLED AUTOCLAVE

table top portable autoclaves

Schering Bridge, Heat Cylinders Set, Voltmeter, Bi- Prism Assembly

auto claves, Laboratory Ovens