Krishna Scf. Works Ambala Cantt, Haryana

We are offering Whirling of Shafts Apparatus. Description:- the set up is designed to study the whirling of shafts. the set-up consists of a sturdy m.s. Frame, variable speed motor bearing holders etc. different bearing can be fitted in bearing block to have different end conditions i.e. (i) both end fixed, (ii) one end free and one end fixed etc. A variable speed motor is provided to drive the shaft along with speed control unit. As the test is destructive, hence the shaft can not be used again experiments:-  display of various modes of whirl for a shaft with :  both ends directionally fixed.  one ends fixed and other free  both ends directionally free.  modes of vibrations can be studied and frequency can be measured in each case utilities: - • electric supply of 230 v, ac. • tachometer to measure the speed technical specification: -  test shafts • length : 1000 mm each. • diameter : 3.2, 4.8 & 6.4 mm (approx.) • quantity : two each.  kinematics coupling bearing for fixed or free ends without restraint.  drive motor universal, 5000 rpm, fractional horsepower.  supplied with a speed control unit  the whole set-up is well designed and arranged in a good quality painted structure.

Brand Name : KRISHNA

WIND TUNNEL APPARATUS DESCRIPTION:- �WIND TUNNEL� has been developed to perform various experiments of aerodynamics and fluid flow. This is a open circuit Wind Tunnel provides a region of controlled air flow into which models can be fitted at downstream of working section. The Tunnel consists of bell mouth shaped entry to guide the air smoothly into settling chamber and stabilizes the air flow this follows working section for test section where various models can be tested. Test section with acrylic sheet, will be provided for visual observation. Working section is followed by diffuser section which reduces the dynamic pressure at the exit. A fan coupled with motor is used to produce desired wind velocity. EXPERIMENTS:- � To plot speed curve for wind tunnel. � To study pressure distribution around (A) aerofoil (B) Cylinder (C) Sphere. � To measure lift and drag on aerofoil model. � To study the development of boundary layer along a plate in Tunnel. UTILITIES REQUIRED: - � Electricity Supply : 1.Phase, 220V AC, 2 KW TECHNICAL SPECIFICATION: - � Variable Speed A : 3 HP Crompton make motor with Speed Controller � Fixed Speed B : 3 HP Crompton make motor � Type : Open Type Wind Tunnel. � Test Section : 250 x 250 x 1000 mm. � Blower : Compatible Capacity � Air Velocity : Maximum 30 ms (in Test Section). � Digital Force Indicator : For Lift and Drag force � Multiple Manometers : 0-40° inclination with vertical axis. � U Tube Manometer : Length 500 mm. � Inclined manometer : 300 mm � Pitot Static Tube : For Velocity Measurement � Micro-Pitot Tube : For Boundary Layer Experiment � The whole Set-up is well designed and arranged in a good quality painted Structure.

Automatic electrically heated all glass distillation apparatus ‘sunrise’ n.p.l. Design, heater embedded in spiral glass tube complete with c.i. Heavy base stand, s.s. Rod, clamps, plug and board etc. sr. No. flask capacity distillation a. 3 liter single distillation without cut off b. 3 liter double distillation without cut off c. 3 liter triple distillation without cut off d. 5 liter single distillation without cut off e. 5 liter double distillation without cut off f. 5 liter triple distillation without cut off g. 10 liter single distillation without cut off h. 10 liter double distillation without cut off i. 10 liter triple distillation without cut off optional:- 1. automatic cut off device with electrodes for single distillation 2. automatic cut off device with electrodes for double distillation 3. automatic cut off device with electrodes for triple distillation

The company is working on to provide premium quality Universal Vibration Apparatus that provides comprehensive unit to perform the vibration experiments. A universal frame is provided upon which quick and easy assembly of various experiments can be done. The unit is self-contained to safely store spares. The students can easily assemble the experiments and study the theory of vibrations practically. We are the prominent producer of efficient and powerful Universal Vibration Apparatus which meet international standard. Experiments : Following experiments can be performed with this unit : To verify the relation simple pendulum. To verify the relation of compound pendulum & to determine the radius of gyration. To study radius of gyration of bi-filer suspension. To study the undamped free vibration of spring mass system. To study the longitudinal vibration of helical coiled spring. To study the forced vibration of simply supported beam for different damping. Undamped torsional vibrations of single rotor system. Undamped torsional vibrations of double rotor system. To study the damped torsional vibration of single rotor system and to determine the damping co-efficient. Verification of Dunker ley's Rule. To study the forced damped vibration of spring mass system Advantages : Ready for bulk dealing Quick delivery International standard Reasonable cost

Power : 200 kW

Voltage : 220 V

Warranty : 1 Years

Weight : 1445 Lbs

Our Universal Governor Apparatus is designed to study the working of different governors normally used to control the speed. It consists of a main spindle, mounted vertically on the base plate. This spindle is driven by a variable speed Motor which is also mounted vertically on the same base plate. Any one governor assembly out of four can be mounted on spindle. The spindle speed is controlled by speed control unit. A graduated scale is fitted to the sleeve to measure the displacement. Our Universal Governor Apparatus is available at an affordable market price. Experiments : Determination of characteristic curve of a sleeve position against speed of rotation for all governors. To study the effect of varying the mass of the center sleeve in Porter and Proell Governor. To study the effect of varying the initial spring compression in Hartnell Governor. To study the determination of characteristics curves of radius of rotation against controlling force (Actual & Theoretical) for all governors.

Warranty : 1 Year

Our Thermal Conductivity Apparatus are also known as Thermal Conductivity Of Metal Rod. The product is available at an affordable market price for our customers. Our Thermal Conductivity Apparatus consists of metal bar, one end of which is heated by an electric heater while the other end of the bar projects inside the cooling water jacket. We supply the product world wide to fulfill the requirements of our customers. The product includes : A cylindrical shell filled with the asbestos insulating powder surrounds the middle portion of the bar The temperature of the bar is measured at different sections Heat input to the heater is given through Variac and measured by Digital Voltmeter & Digital Ammeter By varying the heat input rates, wide range of experiments can be performed rise is noted Experiments : To plot the temperature distribution along the length of Bar. To determine the thermal conductivity of given bar at various temperatures.

Weight : 100-200gm

Voltage : 3-6VDC

Application : Indsustrial Usage

Power Source : Electric

Warranty : 1Year

Tablet Making Machine is in massive demand by the pharmaceutical industry. Tablet Making Machine that we manufacture is made in accordance with set industrial standards and norms and high on demand by the customers based across the diverse regions of the country. This Tablet Making Machine is obtainable at most discounted rates. Key Features : Compact design User friendly operation Effective performance High output speed High efficiency Low maintenance cost Ideal For : Pressing tablets of varied sizes

Weight : 100-500kg

Voltage : 220V

Automatic Grade : Automatic

Power : 1-3kw

Warrenty : 1 Year

Fabricated as per set industrial requirements, Tablet Coating Pan we offer is the best available in the market. Appreciated for its high-end performance, compact design, durability and effectual functioning, Tablet Coating Pan is high on demand in the domestic markets. Consequently, we are counted as a top-notch Tablet Coating Pan Manufacturer and Supplier based in India. Specifications : MS Sheet, Powder coated body, Stainless Steel Pan Provided with main lead 15 amp plug Operated by geared motor that works through timer and air blower, which is further operated by energy regulator Working of the machine through oil immersed gearbox with ¼ H.P Motor resulting or by heavy duty DC geared motor Tablet coating pan 12 ½ dia stainless steel Air blower is operated independently  Switches for blower &motor are fixed on a panel through neon indicators

Weight : 100-200kg

Voltage : 220V

Automatic Grade : Automatic

Power : 1-3kw

Warranty : 1year

We are into offering to the clients Student Organ Bath, which is made using high grade components. Owing to its flawless functioning, longer service life and optimum performance, Student Organ Bath is high on demand in the national markets. Clients are eased with the availability of same at affordable rates and in safe packaging. Specifications : Perspex organ bath with fine thermostatic electric stirrer, temperature control and complete set of accessories making it a versatile unit for all kinds of research work Stirrer unit is completely independent and dips in the bath in one corner fixing on its special stainless steel upright Bath 12��x 9��x 8�� with leak proof dovetailed joints resting in study metal frame Top of the bath carries a 1��x 3/8�� thick band for fixing accessories Inside the bath: metal sheathed heating element (easily replaceable) AMS junction box is fixed to the bath frame, and carries all the electrical leads Two pilot lamps indicate functioning of the thermostat and stirrer Controlled by means of a fine adjustable thermostat with sensitivity +1oC Standard Components : Warming coils Double set of glass inner vessels Two stainless steel capillary levers X blocks Oxygen tubes Four stainless steel upright with boss heads

Material : Metal

Power : 200 kW

Voltage : 220 V

We have Stefan Boltzmann Apparatus which is designed to determine the Stefan Boltzmann constant. The apparatus consists of a hemisphere fixed to a Bakelite plate, the outer surface of which forms the jacket to heat it. Our Stefan Boltzmann Apparatus is available in the market at an affordable market price for our customers. The product consists : Test disc are measured with the help of temperature sensors The copper test disc is introduced at the center of hemisphere Hot water to heat the hemisphere is obtained form a hot water tank A hemisphere fixed to a Bakelite plate, the outer surface of which forms the jacket to heat it Experiments : Determination of Stefan Boltzmann constant and study the effect of hemisphere temperature on it.

Power : 200 kW

Voltage : 220 V

Warranty : 1 Years

Driven Type : Electric

we are one of the reliable manufacturers, exporters and suppliers of slip and creep measurement apparatus in india. This apparatus is useful for measuring power transmission in various input power conditions with different belt tension. Furthermore, belt slip or creep can be measured with the help of our slip and creep measurement equipment. One can acquire our laboratory apparatus at nominal price. Buyers are free to place bulk orders. working of slip and creep measurement apparatus : the apparatus consists of a variable speed d.c. Motor, driving pulley and driven pulley of equal diameters. The pulleys are mounted on input shaft (motor shaft) and output shaft. The driven pulley can slide on the base only with bearing block to change the initial tension in belt. Brake drum is mounted on the output shaft, which helps to measure power output. The motor speed is varied by thyristor control d.c. Drive. A double channel digital speed indicator indicates driving and driven pulley speeds. With the help of stroboscope (not in the scope of supply) it is possible to demonstrate the slip of belt on driving and driven pulley. experiments : to measure co-efficient of friction between pulley material and different belt materials.   to measure power transmitted with varied belt tension.   to measure percentage slip at fixed belt tension by varying load on the brake drum and plot the graph of (t1-t2) vs percentage slip i.e. Â��slip characteristicsâ�� finding a creep zone from graph.   to measure belt slip speed and observe the limiting value of load at constant speed when the slip just starts.   to study creep of belt.li> utilities : electricity 0.5 kw, 220 v, single phase technical specification : motor : variable speed dc motor 1hp, 1500 rpm.   pulleys : driving and driven pulleys of equal diameters (flat pulleys)   belts : flat belts of fixed length of following belt material fabric belt canvas belt leather belt   loading arrangement : brake drum along with spring balance and rope arrangement is provided to load the system.   belt tightening arrangement : bearing block is sliding and dead weight can be applied to set the initial tension in belt.   speed indicator : 2 channel digital speed indicator with switch to change the channel.   the whole set-up is well designed and arranged in a good quality painted structure.

We are one of the reliable Manufacturers, Exporters and Suppliers of Slip And Creep Measurement Apparatus in India. This apparatus is useful for measuring power transmission in various input power conditions with different belt tension. Furthermore, belt slip or creep can be measured with the help of our Slip And Creep Measurement Equipment. One can acquire our laboratory apparatus at nominal price. Buyers are free to place bulk orders.Working of Slip And Creep Measurement Apparatus :The apparatus consists of a variable speed D.C. Motor, driving pulley and driven pulley of equal diameters. The pulleys are mounted on input shaft (motor shaft) and output shaft. The driven pulley can slide on the base only with bearing block to change the initial tension in belt. Brake drum is mounted on the output shaft, which helps to measure power output. The motor speed is varied by Thyristor Control D.C. Drive. A double channel digital speed indicator indicates driving and driven pulley speeds. With the help of Stroboscope (not in the scope of supply) it is possible to demonstrate the slip of belt on driving and driven pulley.Experiments : To measure co-efficient of friction between pulley material and different belt materials. To measure power transmitted with varied belt tension. To measure percentage slip at fixed belt tension by varying load on the Brake drum and plot the graph of (T1-T2) v/s percentage slip i.e. Slip Characteristics Finding a Creep Zone from graph. To measure belt slip speed and observe the limiting value of load at constant speed when the slip just starts. To study creep of belt.   Speed Indicator 2 Channel digital speed indicator with switch to change the channel. The whole Set-up is well designed and arranged in a good quality painted Structure.

We are offering Separating and Throttling Calorimeter confirmation with international quality accepted standards, Separating and Throttling Calorimeter is high on demand in the national markets. Effectual functioning, trouble free performance and longer service life are exhortations that characterize the range of separating calorimeter offered by us. Consequently, we are counted as a top notch Separating and Throttling Calorimeter manufacturer and supplier based in india. about Separating and Throttling Calorimeter comprises of two concentric chambers- inner chamber and outer chamber that communicate with each other by means of an opening at the top as the steam discharges by the metal basket that has a large number of holes, the water particles due to their heavier momentum gets separated from the steam and is collected in the chamber dry steam in the inner chamber moves up and than down aging through the annular space between the two chambers and enters the throttling calorimeter suitable for : finding out dryness fraction of stream

We are the prominent manufacturer of Reynolds Apparatus which we supply all over the world. We offer the equipment at a competitive market price. Our Reynolds Apparatus is manufactured from fine quality raw material which we procure from reliable sources. Every product is properly tested to provide tension free service and high performance to our valued customers. The product includes : Consists of a glass tube which one end having bell mouth entrance connected to a water tank The glass tube a cock is provided to vary the rate of flow Flow rate of water can be measured with the help of measuring cylinder and stop watch A capillary tube is introduced centrally in the bell mouth Experiments : To study different types of flow To determine the Reynold�s Number and hence the type of floe either laminar or turbulent. Utilities Required : Water Supply Drain

Weight : 40-50kg

Voltage : 220V

Power : 100-200W

Driven Type : Electric

Temperature Range : 10-20 Deg C

Warranty : 1yrs

Automation Grade : Automatic

Refrigeration test rig description:- this unit consists of a hermetically sealed compressor with air cooled condenser. A capillary or expansion valves are next to condensers followed by medium temperature evaporators. Electrical energy supplied to the compressor can be measured by energy meter. This test rig is used to perform the following experiments. Experiments:-  to determine cop of unit. Technical specification: - compressor : isi kirloskar tecemshah hermetically sealed compressor capacity. Compressor capacity : ½ hp condenser : suitable for above compressor with suitable cooling fan & fins and copper tube air cooled. Expansion device : capillary tube & filter drier pressure gauge : 2 nos. For high and low pressure. Service valves : 4 nos. Hand set valve evaporator coil : suitable for above compressor immersed in water tank. Refrigerant : freon – 12 134a rotameter : suitable for compressor capacity glass tube rotameter to measure the flow of liquid refrigerant gas. Control panel : comprising of :- 1. main switch 2. voltmeter digital type – 1 nos. 3. amp. Meter digital type – 1 nos. 4. energy meter for compressor input. 5. switches indication lights etc. 6. digital temperature indicator: 5 nos. 7. temperature sensor (thermocouple) : 5 nos. Voltage : single phase 220 volts 50hz. Ac supply manual : operation and maintenances manual should be provided along with the supplied equipment. The equipment is mounted on a sturdy frame with control panel.

Recording drum (kymograph) technical specifications:- electrical student kymograph with special heavy duty motor, oil lapped gear systems, speeds from 0.12 mmsec to 640 mmsec, in 8 steps, jerk free running, instantaneous start & stop clutch. Stainless steel spindle with screw lift 15 x 15cm cylinder with leveling screws, pilot lamp, plug & cord. Recording accessories: it consists of below accessories: accessories 19 no.:- 1. kymograph paper 2. induction coil 3. universal lever 4. hook weight 5. tambour 6. tuning fork 100 7. tuning fork starter 8. semir clamp (brass) 9. double clamp 10. electric time maker 11. heart lever 12. frog board 13. stylus with pointer (aluminum) 14. simple key 15. electrode with copper wire 16. smoking burner 17. muscle chamber with muscle lever & electrode 18. heart chamber with heart lever & electrode 19. simple stand accessories 11 no.:- 1. double fatta induction coil 2. dubois key complete with table clamp 3. tuning fork 100 4. myograph complete with lever 5. drum paper clip 6. simple electrode with copper wire 7. adjustable stand 8. smoking burner 9. kymographic glazed striper (25 sheet) 10. muscle chamber with electrode 11. heart chamber with electrode

We are the leading manufacturer of Pitot Static Tube which is used to measure the local velocity at a given point in the flow stress. The process of the product is also known as Pitot Static Tube Set-up. We offer the product at an affordable market price. Our powerful manufacturing unit is fully capable of producing premium quality Pitot Static Tube which we supply world wide to fulfill the requirements of our clients. The product includes : A Pitot tube of standard design made of copper / SS is supplied and is fixed below vernier scale The Vernier scale is capable to measure the position of Pitot tube in transparent pipe section The pipe has a flow control valve to regulate the flow A U-tube manometer is provided to determine the velocity head Present Set-up is self-contained water re-circulating unit Flow control valve and by-pass valve are fitted in water line Flow rate of water is measured with the help of measuring tank and stop watch Experiments : To find the point velocity at the center of a tube for different flow rates of water and calibrate the Pitot tube To plot velocity profile across the cross section of pipe

Material : Metal

Voltage : 220 V

Warranty : 1 Years

We bring forth premium Pelton Wheel Turbine Test Rig in India. Our Turbine Test Rig is specially designed for experimental purposes in laboratories. Our Turbine Test Rig is manufactured as per the international quality standards and premium components to ensure high durability. We make available Pelton Wheel Turbine Test Rig with different technical specifications according to the requirement of buyers. Buyers can acquire Pelton Wheel Turbine Test Rig from us at affordable price.Experiments :        To study the operation of a Pelton Wheel Turbine        To determine the Output Power of Pelton Wheel Turbine        To determine the Turbine Efficiency

Weight : 100-400kg

Voltage : 220V

Application : Industrial Use

Power : 1-3kw

Automation Grade : Automatic

We have Notch Apparatus which is widely known as Discharge Over Notches Apparatus. Our Notch Apparatus setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required Notch is fitted at one end of this channel .A hook gauge with vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. We offer the product at a competitive market price. Set of three brass notches includes : Rectangular notch 60 V notch & 45 V notch provided along with the set up Present setup is self contained with water re-circulating unit Provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass value are fitted in water line to conduct the experiment on different flow rate Flow rate of water is measured with the help of measuring tank and stopwatch. Experiments : To Determination Co-efficient of discharge (CD) through : V notch (45 deg. and 60 deg.) Rectangular Notch Trapezoidal Notch

Weight : 100-500kg

Voltage : 220V

Power : 100-200W

Driven Type : Electric

Temperature Range : 10-20 Deg C

Automation Grade : Automatic

We are offering Multi/ four Cylinder Four Stroke Petrol Engine Test Setup. Td 103: multi/four cylinder four stroke petrol engine test setup description:- ic engines are widely used in automobile, domestic and industrial sector. they are classified according to cycle, number of cylinders, arrangement of cylinders, fuel used, type of ignition, valve arrangement, cooling system. Test rigs are used to find out the performance of an ic engine. it consists of an ic engine, dynamometer, fuel measuring, air intake measuring and various other arrangements. Provision for mores test is done. experiments:- • to determine specific fuel consumption. • to determine brake horse power. • to determine brake thermal efficiency. • to determine mechanical efficiency • to determine indicated thermal efficiency utilities required:- • electric supply : single phase, 220 v, 5 amp. (required only for td-103b, td-103c) • continuous water supply : 10 lpm approx. • fuel : 10 liters. • floor area : 3m x 2m • tachometer : for rpm measurement technical specification: - engine a four stroke, multi cylinder, water cooled, self start, self lubricating petrol engine provided lubrication oil filter air cleaner, ignition coil, throttle control and clutch arrangement. type of loading td-103a - rope brake dynamometer rope brake arrangement fitted with the brake drum fitted on the engine shaft and provided with cooling water arrangement dial type spring balances in kg units. td-103b - electric brake dynamometer the engine is coupled with electrical alternator with resistance loading arrangement. Digital voltmeter and digital ammeter is provided. td-103c - hydraulic brake dynamometer it consists of weighing gear, control gear, a dead weight in kg unit suitable for testing the engine at different speeds. The engine and dynamometer are directly coupled on a substantial base plate. fuel measuring system 1 fuel measuring system consists of a fuel tank, a burette and a three way cock arrangement. air intake measuring system air tank fitted with orifice and water manometer. measurement of heat carried it consist of inlet outlet piping with flow control valve, water away by cooling water meter to measure the rate of flow of cooling water and thermometers for measuring inlet & outlet water temperature. panel board arrangement panel board arrangement consisting of, ignition & starting switch, a high voltage knife switch assembly for cutting off each cylinder for morse test. optional: exhaust gas calorimeter - made of stainless steel including the body & the tubes for cooling water circulation and designed to get maximum temperature difference. The body of the calorimeter is insulated on all sides to prevent heat losses due to radiation. Thermometers are provided to measure the temperature of water and gas.

Brand Name : KRISHNA

We have Motorized Gyroscope which is specifically manufactured to provide hassle free services to our customers. Our Motorized Gyroscope consists of heavy stainless steel disc mounted on a horizontal shaft, rotated by a variable speed motor. The product is extremely useful for different pharmaceuticals and research lab requirements. Our Motorized Gyroscope is available at an affordable market price. The product includes : The rotor shaft is coupled to a motor mounted on a trunion frame A weight pan on other side of disc balances the weight of motor Rotor disc can be move about three axis Torque can be applied by calculating the weight and distance of weight from the center of rotor The gyroscopic couple can be determined Experiments : Experimental justification of the equation T = l w. wp for calculating the gyroscopic couple by observation and measurement of results for independent vibrations in applied couple T and precession wp. To study the gyroscopic effect of a rotating disc. Observation of gyroscopic effect of rotating disc

Material : Metal

The company is high acclaimed for providing to the esteemed clients superior quality Motor Driven Disintegrator. We specialize in manufacturing Motor Driven Disintegrator using quality components thus ensuring its high efficiency and accurate working profile. Consequently, we are considered to be one of the prominent Motor Driven Disintegrator Manufacturers and Suppliers based in India. Specifications : Mounted on iron base size 18x 12 (small size) Laboratory size hammer type provided with H.P. heavy duty motor single phase 220 volt 50 C/S A.C comprising of four steel hammers fitted to a disc of 3 in dia 1 thick through which passes a shaft being revolved at 3000 R.P.M. Inner surface undulating and lower part of drum is fabricated using chrome plated brass that is detachable so that SS sieves of differ went mesh size a set of three sieves of coarse, medium and fine Hammers are enclosed in a C.I drum the sides and upper surface of which are roughened Built on angle iron frame of Size 24x14 x 20 high Equipped with easy to be placed Hopper manufactured using die casted Aluminium Attributes : Simple design High grade Reliable performance Easy operation Minimal maintenance Long functional life Resistance to wear and tear

Warranty : 1 Year

Application : Industrial

We are well-known Manufacturer, Exporter and Supplier of Michelson Interferometer in India. We provide Interferometer that is used to determine the wavelength of Sodium Light. Our Interferometer is manufactured using the latest technology and high-grade components to ensure superior quality. Our Interferometer is highly durable in nature due to its strong and sturdy construction. We provide Michelson Interferometer at the best price in the market.Technical :To determine the wavelength of Sodium Light/Laser Light using Michelson Interferometer with arrangement to micro measure Highly polished plane slabs placed parallel at 45 and mirrors are placed right angle. Laser light with power supply fitted. Fringes formed are easily visible on wall or paper.Precisely developed with all perfect Optical, Mechanical components in our Research Laboratory, mainly used to find the wave length of monochromatic light or the calibration of scales and the standard experiments.   The Nomenclature is given below : Movable Surface Coated Mirror Fixed Surface Coated Mirror loaded with springs Compensator Beam Splitter Universal adjustable Telescope with cross line graticule Diffused Glass Screen with pin-hole holder Main knob for moving Mirror No. 1, lease count 0.01 mm. Slow motion drums for moving Mirror No. 2, least count 0.0001 mm. Screw with nut and spring to adjust the view of pin hole in horizontal        position.

Warranty : 1 Year

Application : Laboratory

Power : 3-5 kw

Feature : Durable

We specialize in manufacturing and supplying Laminar Air Flow Cabinet. Laminar Air Flow Cabinet provided by us is recognized in the market for its unmatched quality, effective performance and long term durability. Keeping the market standards in consideration, we have fixed competitive prices for the same and make them available in safe packaging. Specifications : Work-bench made of thick ply-board enclosed with stainless steel sheet Blowers, pre-filters and motor fixed in lower portion of the cabinet HEPA Filter offered vertically on back of the work bench horizontally Also Available In : LAFH-01 Working area size 60 x 60 x 60 cm LAFH-02 Working area size 90 x 60 x 60 cm LAFH-03 Working area size 120 x 60 x 60 cm LAFH-04 Working area size 180 x 60 x 60 cm Entire structure manufacturing using Stainless Steel Structure made of M.S supplied with S.S. Work Bench

Material : Metal

Feature : Durability, Rust Proof, Good Quality

Size : 200x40x80 cm