Lab Incubator Dealers in Mahesh Nagar, Ambala

• Power Source: Electric
• Temperature: 37 deg C
• Portable: Yes
• Operation Type: Continuous
• Automation Grade: Semi-Automatic
• Customisation: Yes
• Glass Viewing Window: Yes
• Circulation Pump: Yes

Specifications : Inner chamber and outer body of SS 304 Heating up to 95°C Digital Temperature Indiacator cum Controller with precise accuracy of ±1°C A Shaking speed range from 40 to 180 strokes special pyramid type cover provided avoids per min Supply: 220-240 Volts 50 Hz Single Phase

We are considered as an authentic Manufacturer, Supplier, and Exporter of BOD Incubator. Our BOD Incubator is double walled cabinet with inner chamber of anodized Aluminum or Stainless Steel and outer M.S. sheet duly painted. The gap of 75mm between the outer and the inner wall is filled with special grade glass wool to prevent thermal losses.  The BOD Incubator, we offer, is fitted with two air circulation fans for maintaining the temperature uniformly throughout the chamber. Heating elements are placed in the air path and are duly insulated from the body. The inner chamber of BOD Incubator is ribbed for placement of shelves at desired heights. Full view inner glass door permits inspection of specimens, without disturbing the same. Unit is fitted with door operated illumination lamp inside the chamber. The temperature range from 5oC to 50oC is controlled by Digital Temperature Controller cum Indicator.

• Warranty: 1 Year
• Weight: 2 kg(Approx)
• Dimension: 230x160x70mm(Approx)
• Temperature Resolution: 1 Degree Celsius
• Display: 3.5 Inches Coloured TFT LCD Display
• Display: Digital

category : heating instruments standard double wall fabrication.  inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel paint or mat finished pastle colour combinations.  the gap is filled with special glass wool for temp. Insulation.  double wall door with double  window for observation in the chamber. Temperature range 5oc above ambient to 80oc + 2oc controlled by a thermostat. L- shaped thermometer is provided for taking temp. Readings.  panel is provided with pilot lamps for mains & heaters, on-off switch, temp. Control knob etc.  the equipment is workable on 220 v ac 50 hz single pahse. Heating is achieved from 3 sides. Perforated removable shelves also provided chamber size in mms. & inches a)  300 x 300 x 300     (12" x 12" x 12") b)  350 x 350 x 350     (14" x 14" x 14") c)  400 x 400 x 400     (16" x 16" x 16") d)  450 x 450 x 450     (18" x 18" x 18") e)  600 x 450 x 450     (24" x 18" x 18")  f)  600 x 600 x 600     (24" x 24" x 24") g) 900 x 600 x 450      (36" x 24" x 18") h) 900 x 600 x 600      (36” x24”  x 24”) i) 900 x 900 x 900      (36" x 36" x 36") optional :- i) air circulating fan. ii) timer 0-24 hours. iii) imported thermostat “ego”/ “jumo” german with the accuracy of ±1°c. iv) digital temp. Indicator- cum – controller. v) digital temp. Indicator.    

• Type: Shaking Incubators
• Material: Mild Steel
• Application: Medical Use
• Voltage: 110V, 220V
• Frequency: 50Hz
• Temperature: 0-50Deg C
• Automation Grade: Semi Automatic

Delighting our customers with our excellent performance, we have cemented our status as a top figure in the industry. As a Manufacturer and Supplier, we proudly present Orbital Shaking Incubator to our customers. It is known for its durability and high performance. We undergo a methodical process of vendor selection to procure raw materials only from the vendors who never fail at delivering constant and excellent quality.

We are counted amongst the prominent Manufacturer and Suppliers of Bacteriological Incubator. We carry out our operations from Haryana, India. We offer it in various sizes and specifications, to meet the varied requirements of our clients. We use the optimal grade component and updated techniques for fabricating it. Our professionals strictly adhere to the set industrial standards and norms while manufacturing it. We are well-equipped with the latest machines and tools, which are required for manufacturing it.

• Material: Stainless Steel
• Certification: CE Certified
• Application: Industrial Use
• Color: Green
• Voltage: 110V
• Frequency: 50Hz
• Temperature: 0-50Deg C
• Volume: 100-150ltr
• Automation Grade: Semi Automatic

we are offering labpro -20 orbital shaking incubator. standard double wall construction. outer chamber made out of mild steel finished in white staving enamel/powder coated paint with mat finished colour combinations. inner chamber made of stainless steel sheet. the door provided with glass full view window. interchangeable platform has been provided. temperature range 5â°c above ambient to 60â° c â± 1â° c is controlled by a digital controller. variable speed control regulator controls the speed up to 200 rpm supplied complete to work on 220v ac 50hz single phase. capacity 16x250m1or 500m1 conical flasks.

Excellent quality, high performance yielding BOD incubators offered by our company are used across diverse industrial segments. Fabricated from fine grade raw material, our BOD incubators are used widely because of their outstanding performance. We make available BOD incubator in various sizes and specifications for meeting the exact requirements of the clients. About BOD Incubator : Fabricated from premium quality raw material Available in various sizes and specifications Can also be customized Versatile design Energy efficient Long life Low maintenance Uses : Also used for specialized and individual research applications Validation Protocols : IQ OQ & PQ Documentation with calibration & Tradability certificate of controller. Safety Features : Built in Temp Deviation Audio visual alarm, Safety thermostat for overshoot Temp. Cut off system. HRC Fuses for compressor heater & mains Time daily circuit for safety of compressor. Special Care : A suitable K V. A. Servo stabilizer is strongly recommended. Technical Specifications : Double walled cabinet mounted on castor wheels Inner chamber made of S.S.304 & Outer chamber made of M. S. Powder coated Full Length inner acrylic door permit inspection of specimens with out disturbing the Temp. Temp. Controlled by solid State Digital controllers housing all the control with PT-100 sensor illumination light are provided for viewing with door limit switch. CFC Free hermetically sealed compressor provide temp. For below ambient condition. Air circulation fan for maintain Temp. Uniformity through out the chamber. Flush fitting insulated double walled door The Chamber is provided with modular removable shelves made of S. S. For complete flexibility in use To work on 230 volts 50 H2.

• Exterior: Elegantly Powder coated Mild Steel Sheet.
• Interior: Chamber and trays made of Stainless Steel (SS-304)
• Freezer Compressor: Hermetically sealed air cooling compressor system
• Temperature Range: Room temperature to 90°C (Resolution 0.1°C)
• Temperature Accuracy: ± 1°c
• Temperature Uniformity: ± 3°C
• Insulation: High grade mineral glass wool
• Temperature Controller: PID microprocessor controller with LED Display.
• Voltage Indicator: Fitted with moving coil type Voltmeter for voltage monitoring
• Lighting Arrangement: Consisting of fluorescent lamps to provide illumination for photosynthetic applications.
• High Voltage Protection: Through automatic voltage stabilizer supplied with the unit
• Power Supply: 220/230V AC, 50/60Hz

• Type: Incubators
• Material: Aluminum, Mild Steel
• Shape: Square
• Application: Industrial Use, Medical Use, Maintain Temperature For Test Tissue Culture Growth
• Color: Green
• Voltage: 220V, 220 V
• Condition: New
• Temperature: 100-150Deg C
• No of Shelves: 2 Shelves
• Country of Origin: India
• Chamber Volume: 112 Liter
• Number Of Shelves: 2 Shelves, 3 Shelves

• Brand Name: LABeQ

Driven by a vision to achieve significant growth in this industry, we are providing a premium quality array of BOD Incubator. Brand LABeQ Frequency 50 Hz Power 220V AC Phase Single Phase Timer 0-24 Hr Chamber Dimension 24x24x24 inch

• Type: Automatic
• Application: Laboratory
• Power Source: Electric
• Voltage: 220 V
• Frequency: 50 Hz
• Temperature Sensor: PT 100
• Warranty: 1 Year

Features : High performance Precision-engineered Long operational life

We have been manufacturing Water Bath Incubator Shaker for a long time using cutting edge technology. We are supplying and exporting Water Bath Incubator Shaker to the various hospitals, dispensaries, nursing homes, research centers, etc. On regular basis. Thus, we are reckoned as one of the noted manufacturers of Water Bath Incubator Shaker in the country. Attributes Double walled constructionInner made of thick S.S. SheetOuter made of M.S. Sheet duly enamel paintedS.S. Made paramedical lid prevents falling of condensed water droplets on the specimensAvailable with immersion type heaterEGO/JUMO GERMAN hydraulic type thermostat with an accuracy of + 0.5o fpr controlling temperatureOscillating tray riding on the brass rollersShaking speed range is between 40 to 140 cycles per minuteShaking tray for holding test tubes or Erlenmeyer flasks of 25mlk or 50ml or 100ml or250ml or 500ml or 1000mlAvailable with L shaped thermometer cord and plug, to work on 220/230 volts A.C. SupplyHeating arrangement ranging from ambient to 100°CHeating and cooling arrangement available with temperature range from 5o to 100oC Inside Size Temp Ambient To 100oC Temp 5oC To 100oC 275 x 275 x 75mm275 x 275 x 150mm405 x 300 x 150mm.

• Type: Orbital Shakers
• Weight: 25-50kg
• Color: Light White
• Voltage: 220V
• Condition: New
• Automatic Grade: Automatic, Semi Automatic
• Driven Type: Electric

orbital shaking incubator capacity 16 x 500 ml flasks 50c above ambient to 600  c. capacity 16 x 500 ml flasks but temperature 100 c  to 500 c with the light arrangement.    optional timer 0-2 hrs. digital temp. Indicator-cum-controller microprosessor pid digital temp. Indicator-cum-controller with timer automatic voltage stabilizer 3-5 kva

• Temperature: 5oC above ambient to 80oC + 2oC
• Chamber size in mms. & Inches: 300 x 300 x 300 (12" x 12" x 12")

INCUBATOR BACTERIOLOGICAL Memmert type Inner chamber made out of richly anodized aluminium or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel paint or mat finished pastle colour combinations. The gap is filled with special glass wool for temp. insulation. Double wall door with double window for observation in the chamber. Temperature range 5oC above ambient to 80oC + 2oC controlled by a thermostat. L- shaped thermometer is provided for taking temp. readings.