Back Back
Portable Autoclave Sterilizer
2,200 Per Piece
1 Piece(s) (MOQ)
Autoclave Sterilizer
Get Price Quote
We are technically proficient in designing and developing high performing Autoclave Sterilizer. Based on advanced technology, Autoclave Sterilizer is widely used for sterilization procedure in laboratory and pharmaceutical industry. The principal of saturate steam sterilization with electricity heated. The better used in rubber, utensil, linen, plastic, dressing material, surgical item and glassware etc. The sturdy constructed double wall inner chamber boiler made out of SS 304 and outer is made of thick mild steel duly paint finishing. The boiler and outer shell is provided with air insulation. The lid is made out of thick mild steel duly collided with stainless steel. The lid is tightened by radial locking system with neoprene gasket to avoid risk or trouble free operation. The paddle lifting device provided for easily open / close the lid. The steam release safety valve and pressure gage fitted on the lid and drain valve in the below of autoclave. The pressure can be use of between 5 to 20 PSI. The ISI electrical heating element provided in inner chamber for water heat and controlled by thermostat or Digital PID Temperature controller. The pressure is indicated in pressure gage. The Autoclave Sterilizer is supplied with complete perforated basket, cord plug. Highlights Longer service life Non-corrosive housing Low operational cost Efficient performance
0.0
View Profile
Best Deals from Laboratory Autoclave And Sterilizers
Double Wall Vertical Sterilizer Autoclave
35,000 - 120,000 Per Piece
1 Piece (MOQ)
Made of stainless steel with the inner chamber of a thick pressure gauge. The outer surface has a mirror polish. The lid of this autoclave is thick along with a safety valve, pressure release valve, and drain valve. Spring loaded valve to adjust the pressure.Specifications: Dimension Power Capacity 250x450mm 2 KW 22 Ltrs 300x500mm 3KW 40 Ltrs 350x550mm 4KW 50 Ltrs 400x600mm 5KW 78 Ltrs 450x600mm 5KW 98 Ltrs 550x750mm 6KW 152litres
Double Wall Autoclave Vertical
15,000 Per piece
1 Piece (MOQ)
Horizontal Autoclave
Get Price Quote
1 piece (MOQ)
SIS-1310 INNER chamber jacket and boiler is made of stainless steel. Sterilization cycle is controlled by three way valve or multi port valve. It is fitted with automatic pressure control switch, (indfos), safety valve, pressure gauge, pressure release valve, water level indicator with cord & plug. Lid is made of mild steel lined with S.S. duly polished / fully S.S. 304 Dia mm x Depth mmLtr. (Approx) Wathage 250 mm x 450 mm 10” x 18”22 Ltr.4 KW 300 mm x 500 mm 12” x 20”35 Ltr.4 KW 350 mm x 550 mm 14” x 22”50 Ltr.4 KW 450 mm x 600 mm 18” x 24”95 Ltr.6 KW 550 mm x 750 mm 22” x 30”178 Ltr. 9 KW 400 mm x 1100 mm 16” x 44” 195 Ltr. 9 KW OPTIONAL: A.Water level cut off device B.Digital Time C.Safety Alarm D.Vacuum Breaker Valve E.Compound gauge F.Single Door / Double Door
100 Ltr. Semi Automatic Autoclave
58,000 Per Piece
1 Piece (MOQ)
Horizontal Autoclave
Get Price Quote
1 Piece (MOQ)
Horizontal Cylindrical Autoclave
Get Price Quote
Our Horizontal Cylindrical Autoclave are widely used for day to day mass scale sterilization procedures and in various bulk laboratory applications, where dryness of the sterilized medium is of paramount importance, given the fact that semi dry sterilizedmedia is prone to various micro-bacterial and viral infections. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individual and specialized research applications. Over a short period of time our brand have been established as reliable exporters of horizontal autoclave in India, catering to the vast markets in South East Asia, Middle East, Africa and Europe. Apart from that we are supplying our autoclave in India , catering to a variety of customers ranging from Defence Installations, Research Laboratories, Educational Institutes and various R and D laboratories of leading national and multinational companies. \n \n Salient Features of Our Triple Horizontal Autoclave (Dry) \n \n Steam Stock Provision \n Versatile usage \n Stainless steel construction \n Ergonomic Design \n Energy Efficient \n Double Safety Radial Locking Arrangement \n Double Safety Valve Protection \n Hydraulic Testing Upto 2.5 times the working pressure \n Calibration And Protocol Documentation \n \n \n Construction : Our horizontal cylindrical autoclave are triple walled units. Outer body of our autoclave is constructed out of thick gauge stainless steel sheet of SS-304 grade. The inner chamber is also made of heavy gauge stainless steel sheet of SS-304 grade. The middle wall is also constructed from the strong and sturdy stainless steel sheet of ss-304 grade s stainless steel sheet. These are steam stocking models connected with a three way valve to control the sterilization cycle inside the autoclave. Our autoclaves are insulated by generous mineral glass ass wool insulation. The strong lid constructed out of thick stainless steel plate has a double safety radial locking arrangement, which ensures an easy and smooth opening and closing operation for all our autoclaves.Heating : The heating process in our triple walled Horizontal autoclave is done through specially designed water heatersof suitable wattage to ensure optimum sterilization time in every sterilization cycle.Working Temprature : As per the international standards and guidelines our triple walled Horizontal autoclave have a working temperature of 121oc. ,however for specific requirements our autoclaves can be upgraded to be used for up to 134°c.Pressure Range : The normal pressure range of our autoclave is 5 psi to 20 psiLoad : 18KWPressure Control : The pressure inside our Horizontal autoclave is controlled through a semi automatic electro mechanical device called piezostat, which controls the pressure inside the chamber and cuts of the current from the heater whenever the pressureexceeds the set pressure value of the autoclave, thus making it very safe and energy efficient. \n \n Technical Features of Deluxe Horizontal Autoclave \n \n Hi-tech radial lock locking mechanism for ultimate ease of operation and safety. \n Steam Release valve of Stainless Steel ensuring a long life of the equipment. \n Huger grade spring loaded safety valve of brass, duly chrome plated. \n Water Indication Gauge with stainless steel enclosure. \n High accuracy and reliable pressure gauge. \n Multiple operating valve for the control of the sterilization cycle. \n Accidental Vacuum Break Device: Ensuring vacuum break due to power failure or any other usage. \n Water Level Cut Off Device \n Cut Hammer contractor for long trouble free usage. \n Specially designed ISI marked stainless steel heaters. \n Plug screen to prevent line choking due to sediment discharge. \n Highly accurate temperature and pressure gauges for boiler chamber and jacket. \n
Stainless Steel Autoclave
6,600 Per Box
1 Piece (MOQ)
Vertical Autoclave
Get Price Quote
100 Piece (MOQ)
12 Inch Portable Autoclave
5,800 - 200,000 Per Piece
500 Piece (MOQ)
Vertical Double Wall Autoclave
Get Price Quote
1 Piece (MOQ)
Laboratory Autoclave
3,500 - 5,000 Per Piece
1 Piece (MOQ)
Autoclave
55,000 Per Piece
A versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins.
Cooker Type Autoclave
8,000 Per piece
1 Piece (MOQ)
0.0
View Profile
Instrument Sterilizer Table Model
Get Price Quote
STAINLESS STEEL, thermostatically controlled , suitable for Sterilizing Surgical Instruments , Small Vessels , Syringes ,Needels etc.provided with a lift tray system and a drainage tap. Supplied with three-core cord, a three pin plug for use on 220230 volts , 50 cycles , single phase , A.C.
0.0
View Profile
Vertical Autoclave
Get Price Quote
0.0
View Profile
Autoclave
Get Price Quote
We offer Autoclave.
0.0
View Profile
Laboratory Autoclave
Get Price Quote
0.0
View Profile
Vapor Sterilizer
Get Price Quote
Our Vapor Sterilizer is transparent, light weight, corrosion proof and is made up of polymer of light grade. Our water vapor sterilizer is also incorporated with two trays which ensure 100% sterilization. Our vapor sterilizers are highly famous and we are a well known vapor sterilizer manufacturer and supplier in India. Light Weight, transparent, corrosion proof made of light grade polymer with two trays to ensure 100% sterilization. For best results, it is recommended to clean the instrument thoroughly before arranging it suitable in tray. Eight to ten formalin tablets should be kept exposed in the cabinet for overnight vapour saturation. Subsequently, only twenty to sixty minutes of exposure will be required to ensure sterilization. It is available in two sizes.
0.0
View Profile
Horizontal Autoclave
150,000 Per Piece
Glass Bead Sterilizer
Get Price Quote
We are offering glass bead sterilizer. Technical specification approximate time for sterilization 5 seconds 10 seconds 15 seconds mirror wool pledgets glass-metal syringes burs curettes needles reamers cotton rolls forceps absorbent materials tips tweezers probes before- on sterlizer for 20 minutes
0.0
View Profile
AutoClave Controller
3,800 - 4,000 Per piece
1 P (MOQ)
0.0
View Profile
Horizontal Cylindrical Autoclave
Get Price Quote
1 Piece (MOQ)
0.0
View Profile
Vertical Autoclave
Get Price Quote
We provide premium Vertical Autoclave that is known in the market for its high performance and efficiency. Our Durable Vertical Autoclave is made out of high grade raw materials that assure high strength to the structure. Technical specification A versatile, electrically heated sterilizer under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler & steam jackets made of thick stainless steel. The outer chamber is made out of thick mild steel/Stainless Steel. The lid is made out of thick stainless steel plate (joint less) or gunmetal and can be sealed by a joint less neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 22 psi with accuracy ± 3 psi. All autoclaves are fitted with standard accessories, such as, a drain cock, pressure gauge, steam release cock, spring loaded safety valve and heating element, but supplied without dressing bins. OptionalAutomatic low-water level cut-off devicePressure Control SwitchWater level arrangementRadical LockDigital Temperature ControllerDressing bins for various size
0.0
View Profile
Autoclave Horizontal High Pressure
Get Price Quote
Cylindrical (triple walled) inner/outer chamber made of thick S.S. fitted with automatic pressure control switch and automatic low water level cut off device. Lid made of S.S. with radial lock to work on 440 volts 3 phase supply.
0.0
View Profile
Vertical Autoclave
36,000 Per
0.0
View Profile
High Pressure Horizontal Autoclave
Get Price Quote
A versatile, electrically heated sterilizer under saturated steam of Adjustable pressure of 10 to 20 psi. double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high grade glass wool to bring the temp. loss to a minimal level.The outer chamber is made out of thick mild steel.The lid is made of thick stainless steel plate (joint less) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with inlet. Supplied complete but without dressing bins. but presented in a horizontal position and without steam jacket. The outer body made of mild steel, inner chamber made of stainless steel. Chamber Size in Dia x Depth Load Capacity (approx.) A. 400x600mm 6KW 78ltrs. B. 400x1100mm 9KW 162ltrs. C. 500x900mm 9KW 165ltrs. D. 500x1200mm 9KW 221ltrs.
Auto Clave
Get Price Quote
We offer Auto Clave. SITRO scientific is a leading manufacturer company of "AUTOCLAVE". We can provide you best quality product at very competitive price.
0.0
View Profile
Stainless Steel Autoclaves
4,500 - 10,000 Per pc
0.0
View Profile
Filter by Localities
Post Free Ad
