Laboratory Autoclave And Sterilizers Dealers in Jasmeet Nagar, Ambala

It is used for sterilization under saturated pressure at any selected point between 10 to 20 p.s.i. (adjustable). these are double walled units with inner chamber (boiler) made of 18 s.w.g. stainless steel and outer chamber is covered with s.s. lid is tightened by radial locking system (as ordered). fitted with neoprene rubber gasket, all system are hydraulically tested up to 40 p.s.i. as a safety measure. all autoclaves are fitted with standard accessories such as water indicator, pressure gauge, steam release cock, low water cut off device, pressure control switch, spring loaded safety valve and heating element. supplied complete with s.s basket, cord and plug to work on 220/230 volts a.c. supply. all these models besides being fitted with stainless steel and having inner chamber made of s.s. and outer chamber covered with stainless steel, are also fitted with vaccum breaker as a safety device. as per the sizes. Ht. x Dia. Inside Outer M.S. Outer S.S. 18” x 10” (450 x 250 mm) 20” x 12” (500 x 300 mm) 22” x 14” (550 x 350 mm) 24''x 18" (600 x 400 mm) 24” x 18” (600 x 450 mm)

• Working temperature: 134 Deg.C

1.Whole body inner and outer by stainless steel. 2.Hand wheel type of quick-open door structure. 3.Pressure safety lock. 4.Indicator light indicates working state. 5.Over temperature&over pressure auto-protection. 6.Double scale indication pressure gauge. 7.Self-inflating type seal. 8.Safe protection of water lacking. 9.Automatically shut off with beep reminding after sterilization. 10.Easy to operate�safe and reliable. 11.With two stainless steel sterilizing baskets.

We manufacture and export fine quality Portable Autoclave. Our Portable Autoclave is Safe to operate, with long life, for the controlled high pressure steam sterilization of laboratory equipment and media for microbiological works. Our Portable Autoclave is portable, electrically heated, with working pressure adjustable from 5 lbs to 15 lbs/in2, diecast body of high tensile strength aluminum, lid equipped with a spring loaded safety valve of brass adjusted on 15 lbs but can be adjusted to the required pressure by using its chc knut, pressure weight valve set at 17/18 lbs/in2 work automatically. If the other safety valve fails to release the excess steam, then with pressure gauze 0-30 lbs/in2 and closed by six wing nuts having long threaded screw with Bakelite knobs, neoprene gasket do not allow any leakage, lid with a metal handle and a Bakelite grip, body with a steam release tap system tube having a Bakelite knob at right side which is closed before starting and when opened after completion ensures the contents are dry at the end of sterilization process. Portable Autoclave is fitted with an element 2 kW for heating and complete with 1.5 meter 3 core mains cable for use on 220-240 V, 50 Hz AC. Dimensions of the inner working chamber - Diameter x depth mm 300 x 300. Availability : All other vertical and Horizontal Autoclaves in stainless steel are available too. Spare Parts : Gasket for AutoclaveSteam release valve with knobSafety valvePressure gauzeLid handleElement 2 kW Well Suited For : SchoolCollegesHospitalOther industries

Sant engineering made Vulcanizers are horizontal, circular vessels for curing of rubber articles. These are made in diameters ranging from 800mm to 2400mm and the length 1 meter to 12 meters depending upon the requirement of the users.   PRESSURE RATING : Uttam Vulcanisers are normally designed and built for a working steam pressure of 5 Kg/cm and are tested hydraulically before despatch for a pressure of 7.5 Kg/cm   DIRECT/INDIRECT HEATING : For direct steam curing single wall vulcanisers are standard supply, however for indirect curing coil-in-chamber type Vulcanisers can be supplied with cyclonic-fan motor for even temp. in vessel. TYPES OF DOOR : Either swing-bolt type doors with mono-rail type retracting mechanism, sealed against leakage by asbestos ropes or quick-lock type design as shown in picture.   TEMPERATURE INDICATION : Temperature indicator shall be provided.   FORCED AIR CIRCULATION : For hot air curing, forced air circulation fans can be attached on rear side of the vessel to ensure even temperature at all points in the Vulcaniser. These fans are with special water cooled seals.   STANDARD ACCESSORIES : Standard Vulcanisers are supplied with blank flanges for steam, inside batch trolly, bridge-stand, safety valves, Guages etc.

Autoclaves, aerosol disinfectors, Polycarbonate Jars, SUCTION TUBING

Water Heater, Electrical Cable, Electrical Products, Electrical Wire

Autoclave, Medical Equipments, Lab Testing Equipments, aerosol disinfectants