Laboratory Hood Dealers in Gobind Nagar, Ambala

With the support of our engineers, we have been able to establish proficiency in designing and developing Fume Hood Chamber with impeccable qualities. Fume Hood Chamber is designed to contain and exhaust toxic, obnoxious or otherwise harmful gases, vapors, mist etc. to protect personnel and equipment. The motor driven blower of Fume Hood Chamber creates negative pressure within the chamber extracting the contaminated air from work area and expels it to the atmosphere. The hood is ventilated of the air drawn from inside the laboratory which is used effectively for through sweep out of the work chamber. Features Inbuilt centrifugal blower unit Fluorescent tubes with safety electrical Initially located electric plugs. Gas and air connections. Counter balanced sliding up & down front sash (door)   Fume hood made of stainless steel or mild steel. The outer (size 3’ x 3’ x 6’ feet) is made out of S.S 304 grade, mild steel powder coated and wooden mica pasted finished and 316 grade inside acid resistant. The work surface is fitted with small wash basin with good quality tap. A gas cock is also fitted for gas supply. A sliding slash made of glass moves vertically up and down with concealed counter balanced weight. Chamber is fitted with 20W fluorescent light. Space underneath the work station is provided with storage compartment. 15/5 Amp socket with switches is provided for light and exhaust system. Fume Hood Chamber is supplied with cord and plug to work on 220/440volts 1/3 phase 50Hz A.C. Complete with exhaust system PVC 4” x 10’ft round fume duct. The duct for exceeding above 10’ft length high CFC exhaust system provided optional.

Lyzer Fume Hood cabinet: Fabricated out.of thick c.r.c.a. sheet OR Wooden Board, double chamber, outer triple layer enamel painted and inner finished in apoxy & lined with compressed a asbestos sheet with strong blower exhaust system, light arrangement & counter balanced sliding sash. To work on 220 / 230V AC 50 Hz. Power plug with socket provided.Size- Wdt. Dpt. Ht. Exhaust Duct No. 12201 4' x 2.6'x 31/2'           3" dia02 5' x 3' x 31/2'             4"03 6' x 3' x 31/2'             4" 

Product Description Design Structures : Aerodynamic, floor mounted Air Flow Type : Automatic bypass type Construction (Exteriors) : Available in two options:- Stainless Steel 304gr. Outside & 316gr. S.S.Inside. Epoxy power coated 18 & 22 Gauge Galvanized Steel Baffle arrangement : 2 Point suction section with baffle to ensure smooth And immediate exhaust of fumes. As per ASHRAE & EN norms. Airfoil : Flush powder coated airfoil mounted on the worktop. Worktop : Available in following options Chemical resistant splash & spiliage proof jet black Granite worktop. Sink, water tap with drain arrangement worktop fitted with oval shaped 100 x 200mm PP cup-sink for drainage. Epoxy top (at extra cost) Stainless Steel 316gr. Sash (Shutter) : Vertical Sliding Counter balanced toughened glass (5mm thick / Polycarbonate fitted in the powder coated Aluminum. Clear sash open height =500mm-675mm According to size & Fume Hood. Service Fittings : Remotely operated color coded ( as per international standard) total three services valves with SS breaded flexible hose & brass fittings (1 for water & 2 for gases). Lighting : CFL tube light (1x36W) with Polycarbonate enclosed for Better Illumination with less power concumption. Electrical utilitie : Four nos electrical sockets 15/5amp & switches, ‘North West / HAVELLS make \ 50Hz switches have LED to Indicators to show ON position of switches to be Provided. Control panel provided with starter for blower. Complete rigid structure to support fume hood. Double skin shutter with self closing hinges. Digital Air Flow : This device is an accessory for fume hood to indicate the Approximate face velocity of airflow with primary Purpose of warning when a low flow condition occurs. Red & LED’s correspond to low & normal flow rates. When flow decreases from normal to low an audible Alarm will also actuate requiring manual Acknowledgement for silence. Centrifugal Blowe : Silent high efficiency blower, consisting of continuous Rating motor and chemical resistant impeller. The blower Designed to give face velocity of 80 to 120 feet/minute (FPM) as per ANSI/AIHA Z9.5 at the safe working Height. Air suction capacity : Silent 650 CFM confirming to international face velocity Norms and a per fume hood airflow pattern. Fume Hood (Stainless Steel) Frame of S.S.304grade from outside & 316 grade inside.

We provide Tissue Culture Hood that is made of Sunmica clad thick wooden board and sun mica clad working top. The unit has frame at front fitted transparent flexi glass and has an arrangement for keeping the door open if desired. Our Tissue Culture Hood is fitted with U.V. germicidal light and one fluorescent tube. Outside Size1200 x 600 x 600 mm (ht. at back) OptionalExhaust SystemStainless Steel Top in lieu of Sunmica top

We have installed all the requisite amenities, necessary for making safe side deliveries. To stock our product for wholesale distribution, we have a state-of-the-art storage facility equipped with the latest inventory control management system. It enables us to meet bulk or retail requirements with ease.   Approx. Price : Rs 1.25 Lakh / PieceProduct Details : Material - Steel Size - Customized Power - 230V Features : Excellent filtration Energy saving Long service life

• Country of Origin: India
• Material: Stainless Steel
• Application: Laboratory
• Color: Silver
• Condition: New
• Finishing: Polished

Fume Exhaust Hoods are designed to contain and exhaust toxic, obnoxious harmful vapours, mists etc. particularly for protecting laboratory personnel and equipment. A motor blower system generates negatives pressure within the encloser extracting the contaminated air from the work area and expels it into the outside atmosphere. Highly recommended in different laboratories like biochemistry, soil test, food microbiology pharmaceuticals units, printed circuit board etching and cleaning operations, miniature component assembly etc. These are capable of handling corrosive fumes of sulphuric & Hydrochloric acid etc. CONSTRUCTION: Fume Hoods are made of Stainless Steel 304 grade from outside with working space covered with stainless steel 316 Qlty. Acid resistant. The work surface is fitted with small wash basin of size 250 x 200 x 150 mm depth of Stainless Steel 316 Qlty. with good quality tap. A gas cock is also fitted for gas supply. A sliding slash made of glass moves vertically up and down with concealed counter balanced weight. Chamber is provided with Flourescent Lighting arrangement for easy working. The space underneath at the work-station is provided with storage compartment for proper uses. The front fascia is provided with a panel incorporating 15/5 Amp. socket with switches for light and exhaust system supplied with cord and plug to work on 220/440 Volt 1/3 phase 50 Hz A.C. Front opening of the Fume Hood will be H 585 x W 910 mm. Complete with Exhaust System having 38mm exhaust fan with stainless. steel deck & Duct to take out fumes

• Country of Origin: India
• Weight: 0-100kg
• Voltage: 110V
• Condition: New
• Power: 1-3kw
• Automation Grade: Automatic

• Power Source: Electric
• Speed: 1440 RPM
• Frequency: 50/60 Hz
• Voltage: 220/230V AC
• Phase: Single Phase

• Material: Mild Steel
• Brand Name: Fume Hood
• Usage/Application: Release Of Hazardous Substances
• Voltage (V): 240 V
• Dimensions: 3 x 3.5 x 5 ft (L X W X H)
• Temperature: 300 Degree Celcius
• Frequency (Hz): 50 Hz
• Power Source: Electric

• Material: Metal
• Application: Laboratory Use
• Color: Silver
• Finishing: Polished
• Height: 5ft
• Weight: 50-100 Kg

We have gained huge accolades in the market for providing finest quality Fume Hood. Fume Hood that we offer is extensively used in laboratories, clinics, hospitals etc. among others. Supreme quality, sturdy structure and longer service life are synonyms to the range of Fume Hood dispatched by us. Specifications : Manufactured using thick wooden board Designed to throw-out all toxic/harmful vapors & fumes thus providing protection to the instrument and the labor Working table top is acid/alkali resistant and a small wash basin with connections facilitated for inlet and outlet of water Front facing panel is fixed with 15/5 Amp socket with switches for fluorescent light and exhaust system Outer is finished with Sunmica and inner epoxy painted The unit is fitted with fluorescent light and a gas cock for gas/air supply Front door moves vertically up and down with concealed counter balanced weights Suitable to work on 220/230 volts A.C supply Space beneath the work station is equipped with storage compartment Working Chamber Size : 3 x 2x 2 4 x 2 x 2 5 x 2½  x 2½ Optional Accessories : PVC Fume Duct (per ft.) High CFM exhaust system (for duct exceeding 10 feet length) S.S. Lining on work bench

• Condition: New
• Usage/Application: Laboratory use
• Brand Name: MOHIT SCIENTIFIC WORKS
• Automation Grade: Semi-automatic

• Size: 4ft, 5ft, 6ft
• Type: Automatic
• Material: Metal
• Shape: Rectangular
• Application: Laboratory Use
• Finishing: Polished
• Warranty: 1 Year

Fume exhaust hoods are designed to contain and throw out toxic, obnoxious, pungent smelling gases to protect personnel and equipment in the laboratories. A motor driven dynamically balanced blower with minimum vibration and noise level, creates negative pressure and sucks contaminated air from work area and throws the same in high-up atmosphere through ductings. Fabricated out of thick ply-board clad from outside in laminated sheet and inside Finished in non-corrosive, chemical resistant EPOXY paint. An up-down sliding sash made of Teak wood mounted in thick glass sheet is provided. Fluorescent lighting provided in the chamber. A gas tap and a power plug is also provided. Stainless steel wash basin and suitable water tap is also provided. A work bench with cup-board with Drawers are provided to hold the hood at a suitable level from ground.

ONE STOP CLEAR AIR SOLUTION for Pathology Labs, Pharmaceutical Industries, Medical Institutions & Biotechnology Units. Designed to contain and exhaust toxic, obnoxious or otherwise harmful gases, vapors, mist etc. to protect personnel & equipment.

We bring forth highly efficient Fume Hoods for the laboratories across the country and abroad. We are enlisted with the eminent Manufacturers, Exporters, and Suppliers of Fume Hoods from Haryana, India. These large pieces of equipment that we offer are made of wide wooden boards. They are designed and developed in absolute adherence to quality norms, so as to reduce the exposure of toxic vapors. Details : Outer finish is done with sun mica and inner with epoxy paintWorking table top is fitted with acid/alkali-resistant tiles and a small wash-basin with connections provided for inlet and outlet of waterThe front door moves vertically up and down with concealed counter balanced weightThe unit is fitted with fluorescent light and a gas cock for gas/air supplyThe space under the work station can be provided with storageCompartments for storage purpose at an extra cost (see Optional Accessories)The front-facing panel is fitted with 15/5 Amp socket and with switches for exhaust system and fluorescent light to work on 220/230 Volts A.C. Supply

We are a giant Manufacturer and Supplier of Fume Hood in Haryana, India. We offer it in various sizes and dimensions, to meet the variegated requirements of our clients. These hoods are widely used in various laboratories for keeping the harmful vapors out of the laboratory area. These hoods are easy to install and demand a negligible maintenance. We use the quality-approved components and updated techniques for fabricating them. These hoods are manufactured in adherence to the latest industrial standards and norms.

• Size: 4ft
• Material: Metal
• Shape: Square
• Application: Laboratory Use
• Finishing: Polished
• Height: 5ft

• Size: 10ft, 6ft
• Material: Stainless Steel
• Shape: Rectangular
• Application: Laboratory Use
• Finishing: Polished
• Height: 5ft, 6ft

Fabricated out of thick wooden board. It designed so as to throw out all toxic/harmful vapors & fumes thus protecting costly instruments and the persons working in the lab. Outer is finished with sunmica and inner epoxy painted. Working table top is acid/alkali resistant and a small wash basin with connections provide for inlet and outlet of water. The front door moves vertically up and down with concealed counter balanced weights. The unit is fitted with fluorescent light and a gas cock for gas/air supply. The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light. To work on 220 A.C. 50Hz supply.Optional Accessories : High CFM exhausts System (for duct exceeding 10 feet in length) S.S. Lining on work bench PVC Fume Duct (per ft.) Available in : MILD STEEL Powder Coated Stainless Steel Wooden. Industries where this product used :Institutes, Medical Colleges, Industries, Pharmacy colleges and Industry, Laboratories, Pharmaceutical Industry, Hospitals

Fume Hood in S.S Work Top outer M.S Size 3�x2.5�x4� feet Fume Exhaust hoods are designed to contain and exhaust toxic. Obnoxious or otherwise harmful gases, vapours, mist etc. To protect personnel and equipment. A motor driven blower created negative pressure within the chamber extracting the contaminated air from work area andf expel it in to the atmosphere. The hood is ventilated of the air drawn for inside the laboratory which is used effectively for through sweep out of work chamber. Fabricated out of best quality thick weather resistant Duroboard clad in Mica Lamination from outside, inner chamber finished in chemically- resistant Epoxy paint and work surface covered with glazed tiles and counter balanced sliding Fluorescent tubes are fitted inside. A gas tap[ and an electric plug is also provided to work 220230 V AC 50 Hz power plug.

Working Chamber Size   3' x 2' x 2'  4' x 2'x 2'   5' x 2 1/2' x 2 1/2'   OPTIONAL:-   (i) High CFM exhaust System (for duct exceeling 10 feet in  length)   3' x 2' x 2'    4' x 2'x 2'      5' x 2 1/2' x 2 1/2'    (ii) S.S. Lining on work bench                                                              3' x 2' x 2'    4' x 2'x 2'       5' x 2 1/2' x 2 1/2'    (iii) PVC fume DUCT (Pert)                                                                 3' x 2' x 2'    4' x 2'x 2'        5' x 2 1/2' x 2 1/2'